API RP 551-1993 Process Measurement Instrumentation

American Petroleum Instltute (API) Third Edition, December 1993. 39p. This RP presents recommendations for minimizing the likelihood of having an accidental fire, and for designing, inspecting, and maintaining fire control systems. It emphasizes the need to train personnel in fire fighting, to conduct routine drills, and to establish methods and procedures for safe evacuation.

American Petroleum Institute (API) First Edition, March 2002. 99p. This Recommended Practice (RP) provides guidelines for design, fabrication, installation, inspection and operation of Floating Production Systems (FPSs). The basic function of a FPS is to receive hydrocarbons from the wellhead, process the hydrocarbons, and store and/or ofЯoad the product to a shuttle tanker or convey it to a pipeline system

American Petroleum Instltute (API) Second Edition, November 2001. 246p. Process monitors that measure and transmit information about chemical composition, physical properties, or chemical properties are known as process analyzer systems. Many of these systems were first developed for laboratory analysis. Today they are primarily used as continuous on-line analyzers.

American Petroleum Instltute (API) Second Edition, September 2008. 654p. This publication provides quantitative procedures to establish an inspection program using risk-based methods for pressurized fixed equipment, including pressure vessel, piping, tankage, pressure relief devices, and heat exchanger tube bundles. This document is to be used in conjunction with API 580, which provides guidance on developing a riskbased inspection program for fi...

This standard American Welding Society (AWS). 2010. 68p. This specification prescribes requirements for the classification of flux cored stainless steel electrodes for flux cored arc welding, flux cored stainless steel rods for root pass welding with the gas tungsten arc process, and metal cored stainless steel electrodes for gas metal arc welding, gas tungsten arc welding, plasma arc welding, submerged arc welding, and any other process to which...

This standard American Welding Society (AWS). 1993. 12p. The rules for the American Welding Society (AWS) Certified Welder Program and the requirements for maintenance of certification are provided in this standard.

This standard American Welding Society (AWS). 1993. 40p. This Supplement C to AWS QC7- 93. Standard for AWS Certified Welders, specifies requirements intended to provide an alternative welders certification method.

This standard American Welding Society (AWS). 1993. 24p. Supplement F of AWS QC7-93, Standard for AWS Certified Welders, was developed using as references ANSI/ASME B31.3, Chemical Plant and Petroleum Refinery Piping and ASME Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualifications. American Welding Society makes no assessment of WPS or PQR compliance with either of these standards nor of their usability in production weldi...

This standard American Welding Society (AWS). 1993. 12p. This Supplement to the AWS QC7-93, Standard for AWS Certified Welders, provides a welder certification method not specifically based on a code but which may be acceptable for various codes.