American Petroleum Instltute (API) Second Edition, September 2008.
654p. This publication provides quantitative procedures to
establish an inspection program using risk-based methods for
pressurized fixed equipment, including pressure vessel, piping,
tankage, pressure relief devices, and heat exchanger tube bundles.
This document is to be used in conjunction with API 580, which
provides guidance on developing a riskbased inspection program for
fixed equipment in the refining and petrochemical, and chemical
process plants.
API RP 581-2008 Risk-Based Inspection Technology
Стандарт
- формат pdf
- размер 5.98 МБ
- добавлен 06 февраля 2012 г.
Смотрите также
ANSI/AISC 360-05 Specification for Structural Steel Buildings
Стандарт- формат pdf
- размер 7.63 МБ
- добавлен 02 февраля 2012 г.
American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 519p. This Specification has been based upon past successful usage, advances in the state of knowledge, and changes in design practice. The 2005 American Institute of Steel Construction’s Specification for Structural Steel Buildings for the first time provides an integrated treatment of Allowable Stress Design (ASD) and Load and Resistance Factor Design (LRFD), and thus com...
API RP 2FPS-2001 Recommended Practice for Planning, Designing, and Constructing Floating Production Systems
Стандарт- формат pdf
- размер 1.8 МБ
- добавлен 02 февраля 2012 г.
American Petroleum Institute (API) First Edition, March 2001. 99p. This Recommended Practice (RP) provides guidelines for design, fabrication, installation, inspection and operation of Floating Production Systems (FPSs).
API RP 2FPS-2001 Recommended Practice for Planning, Designing, and Constructing Floating Production Systems
- формат pdf
- размер 1.8 МБ
- добавлен 08 февраля 2012 г.
American Petroleum Institute (API) First Edition, March 2002. 99p. This Recommended Practice (RP) provides guidelines for design, fabrication, installation, inspection and operation of Floating Production Systems (FPSs). The basic function of a FPS is to receive hydrocarbons from the wellhead, process the hydrocarbons, and store and/or ofЯoad the product to a shuttle tanker or convey it to a pipeline system
API RP 551-1993 Process Measurement Instrumentation
Стандарт- формат pdf
- размер 4.19 МБ
- добавлен 03 февраля 2012 г.
American Petroleum Instltute (API) First Edition, May 1991. 68p. The procedures for installation of the instruments covered in this recommended practice are based on experience with and evaluation of many installations.
API Std 1631-2001 Interior Lining and Periodic Inspection of Underground Storage Tanks
Стандарт- формат pdf
- размер 1.94 МБ
- добавлен 02 февраля 2012 г.
American Petroleum Institute (API) Fifth Edition, June 2001. 30p. The following definitions are applicable to underground tank lining and inspection as described in this standard.
API Std 510-2006 Pressure Vessel Inspection Code In-Service Inspection, Rating, Repair and Alteration
Стандарт- формат pdf
- размер 2.81 МБ
- добавлен 05 февраля 2012 г.
American Petroleum Instltute (API) Ninth Edition, June 2006. 20p. This inspection code covers the in-service inspection, repair, alteration, and rerating activities for pressure vessels and the pressure-relieving devices protecting these vessels.
API Std 653-2009 Tank Inspection, Repair, Alteration, and Reconstruction
Стандарт- формат pdf
- размер 2.09 МБ
- добавлен 03 февраля 2012 г.
American Petroleum Instltute (API) Fourth Edition, April 2009. 166p. This standard covers steel storage tanks built to API 650 and its predecessor API 12C. It provides minimum requirements for maintaining the integrity of such tanks after they have been placed in service and addresses inspection, repair, alteration, relocation, and reconstruction.
AWS D9.1M/D9.1: 2006 Sheet Metal Welding Code (Eng)
Стандарт- формат pdf
- размер 702.19 КБ
- добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2006. 72p. This code provides qualification, workmanship, and inspection requirements for both arc welding (Part A) and braze welding (Part B), as they apply to the fabrication, manufacture, and erection of nonstructural sheet metal components and systems.
AWS QC1: 2007 Standard for AWS Certification of Welding Inspectors
Стандарт- формат pdf
- размер 171.2 КБ
- добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2007. 24p. This standard establishes the requirements for AWS certification of welding inspection personnel. It describes how personnel are certified, and the principles of conduct and practice by which certification may be maintained
AWS QC7-93 Supplement G - AWs Performance Qualification Test
Стандарт- формат pdf
- размер 492.32 КБ
- добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 1993. 12p. This Supplement to the AWS QC7-93, Standard for AWS Certified Welders, provides a welder certification method not specifically based on a code but which may be acceptable for various codes.