• формат pdf, jpeg
  • размер 69.01 МБ
  • добавлен 05 января 2012 г.
Groover M.P. Fundamentals of Modern Manufacturing, Vol. 1 and 2
3 Edition, John Wiley, 2007, 1040 pages, ISBN: 0471744856

A mode, all-inclusive look at manufacturing

In this mode, quantitative approach to manufacturing, Mikell Groover offers balanced coverage of the three basic engineering materials––metals, ceramics, polymers, as well as composites––along with recently developed manufacturing processes and electronics manufacturing technologies.

Throughout Fundamentals of Mode Manufacturing, the emphasis is on manufacturing science and quantitative analysis of manufacturing processes. This emphasis helps students understand the relationships among the material properties and the process variables in a given manufacturing process.

Now updated and revised, this Third Edition of Fundamentals of Mode Manufacturing features:

New chapter on Nanofabrication Technologies, which describes the importance of nanotechnology and future commercial products that will be made possible by this technology.
Updated chapter on Microfabrication Technologies with new material describing how compact discs are produced.
More than 1700 end-of-chapter review questions, multiple-choice quiz questions, and quantitative analysis problems, including many new questions and problems in this edition.
Похожие разделы
  1. Академическая и специальная литература
  2. Геологические науки и горное дело
  3. Камнерезное и ювелирное дело
  1. Академическая и специальная литература
  2. Машиностроение и металлообработка
  3. Детали машин и основы конструирования
  1. Академическая и специальная литература
  2. Машиностроение и металлообработка
  3. Заготовки в машиностроении
  1. Академическая и специальная литература
  2. Машиностроение и металлообработка
  3. Металлорежущие станки
  1. Академическая и специальная литература
  2. Машиностроение и металлообработка
  3. Обработка резанием
  1. Академическая и специальная литература
  2. Машиностроение и металлообработка
  3. Обработка резанием
  4. Эксплуатация металлорежущего инструмента
  1. Академическая и специальная литература
  2. Машиностроение и металлообработка
  3. Технологическая оснастка
  1. Академическая и специальная литература
  2. Металлургия
  3. Металловедение
  1. Академическая и специальная литература
  2. Наноматериалы и нанотехнологии
  3. Наноматериаловедение
  1. Академическая и специальная литература
  2. Промышленное и гражданское строительство
  3. Строительное материаловедение
  1. Академическая и специальная литература
  2. Радиоэлектроника
  3. Материалы электронной техники
Смотрите также

ASM Metals HandBook Vol. 13 - Corrosion: Fundamentals, Testing, and Protection

  • формат pdf
  • размер 79.01 МБ
  • добавлен 17 февраля 2011 г.
ASM International, 2002, 2597 p. ASM Handbook, Volume 13A, Corrosion: Fundamentals, Testing, and Protection, is the first volume in a two-volume update, revision, and expansion of Corrosion, Volume 13 of the ninth edition Metals Handbook, published in 1987. The second volume—ASM Handbook, Volume 13B, Corrosion: Materials, Environments, and Industries—is to be published in 2005. The purpose of these two volumes is to represent the current state o...

ASM Metals HandBook Vol. 14 - Forming and Forging

  • формат pdf
  • размер 56.24 МБ
  • добавлен 17 февраля 2011 г.
ASM International, 2002, 2110 p. Forming and forging processes are among the oldest and most important of materials-related technologies. Volume 14 of the 9th Edition of Metals Handbook describes these processes comprehensively, with accuracy and clarity. Today, industry must continuously evaluate the costs of competitive materials and the operations necessary for converting each material into finished products. Manufacturing economy with no sa...

ASM Metals HandBook Vol. 15 - Casting

  • формат pdf
  • размер 48.79 МБ
  • добавлен 17 февраля 2011 г.
ASM International, 2002, 2002 p. The Handbook is structured in ten Sections, along with a Glossary of Terms. The reader is first introduced to the historical development of metal casting, as well as to the advantages of castings over parts produced by other manufacturing processes, their applications, and the current market size of the industry. Then, the thermodynamic relationships and properties of liquid metals and the physical chemistry of g...

Mazumdar, Sanjay K. Composites manufacturing: materials, product, and process engineering

  • формат pdf
  • размер 68.6 МБ
  • добавлен 01 июня 2011 г.
Language: English, 396 pages, Editor: CRC Press (2002) This book discusses the subject of manufacturing within the framework of the fundamental classification of processes. This should help the reader understand where a particular manufacturing process fits within the overall fabrication scheme and what processes might be suitable for the manufacture of a particular component. The subject matters are adequately descriptive for those unfamiliar wi...

Moiseyev V.N. Titanium Alloys- Russian Aircraft and Aerospace Applications

  • формат pdf
  • размер 21.09 МБ
  • добавлен 03 октября 2010 г.
2006. Taylor and Francis, LLC. p. 196. The publication of Titanium Alloys in Russia: Aircraft and Aerospace Applications offers previously elusive information on state-of-the-art Russian metallurgic technology of titanium alloys. It details their physical, mechanical and technological properties, as well as treatments and applications in various branches of modern industry, particularly aircraft and aerospace construction. This inaugural book a...

Ohring M. Engineering Materials Science

  • формат pdf
  • размер 76.11 МБ
  • добавлен 31 января 2012 г.
Academic Press, 1995, 827 pages, ISBN: 0125249950 Milton Ohring's Engineering Materials Science integrates the scientific nature and modern applications of all classes of engineering materials. This comprehensive, introductory textbook will provide undergraduate engineering students with the fundamental background needed to understand the science of structure-property relationships, as well as address the engineering concerns of materials sele...

Polmear I. Light Alloys: From Traditional Alloys to Nanocrystals

  • формат pdf
  • размер 9.23 МБ
  • добавлен 18 января 2012 г.
4th Edition,Butterworth-Heinemann, Elsevier, 2006, ISBN: 0750663715, Pages: 421 The definitive overview of the science and metallurgy of aluminum, magnesium, titanium and beryllium alloys, this is the only book available covering the background materials science, properties, manufacturing processes and applications of these key engineering metals in a single accessible volume. Use of these metals is now more widespread than ever, and they are r...

Singh R. Introduction to Basic Manufacturing Processes and Workshop Technology

  • формат pdf
  • размер 4.01 МБ
  • добавлен 05 января 2012 г.
New Age International Ltd, 2006, 493 pages Manufacturing and workshop practices have become important in the industrial environment to produce products for the service of mankind. The knowledge of manufacturing practices is highly essential for all engineers and technocrats for familiarizing themselves with modern concepts of manufacturing technologies. The basic need is to provide theoretical and practical knowledge of manufacturing processes...

Smallman R.E., Bishop R.J. Modern Physical Metallurgy and Materials Engineering: Science, process, applications

  • формат pdf
  • размер 8.6 МБ
  • добавлен 20 января 2012 г.
6 edition, Butterworth - Heinemann, 1999, 438 pages, ISBN: 0750645644 For many years, various editions of Smallman's Modern Physical Metallurgy have served throughout the world as a standard undergraduate textbook on metals and alloys. In 1995, it was rewritten and enlarged to encompass the related subject of materials science and engineering and appeared under the title Metals & Materials: Science, Processes, Applications offering a compre...

Smallman R.E., Ngan A.H.W. Physical Metallurgy and Advanced Materials

  • формат pdf
  • размер 6.06 МБ
  • добавлен 24 марта 2011 г.
Physical Metallurgy andAdvanced Materials(Seventh edition 2007,Published by Elsevier Ltd). Language: English, 673 pages. The book has evolved from the earlier editions of Modern PhysicalMetallurgy (1962, 1970, 1985) and later editions of Modern Physical Metallurgy and Materials Engineering (1995, 1999). Additions have been made to almost every chapter, which now include a number of worked examples in the text to illustrate and emphasize a partic...