• формат pdf
  • размер 19.44 МБ
  • добавлен 24 декабря 2011 г.
Hutchinson J.W., Wu T.Y. Advances in Applied Mechanics
Монография, New York, Academic Press, 1983, 454 стр., V. 23.

Micromechanics of Crystals and Polycrystals.
Mechanisms of Deformation and Fracture.
Recent Developments Conceing Saint-Venant’s Principle.
Nonlinear Elastic Shell Theory.
Elastic Surface Waves with Transverse Horizontal Polarization.
Похожие разделы
Смотрите также

Bui H.D. Fracture Mechanics. Inverse Problems and Solutions

  • формат pdf
  • размер 19.02 МБ
  • добавлен 01 августа 2011 г.
Springer, 2006. - 375 p. Today, Fracture Mechanics is a well known topic within the scientific community. Applications of Fracture Mechanics can be found in various fields ranging from solid mechanics and structures to materials sciences and computational mechanics. However, most of these results apply only to linear fracture mechanics of two-dimensional and homogeneous isotropic solids. Therefore there are still incompletely solved problems; s...

Fischer-Cripps A.C. Introduction to Contact Mechanics

  • формат pdf
  • размер 8.03 МБ
  • добавлен 27 сентября 2011 г.
2nd edition, Springer Science+Business Media, 2007, 221 pages This book deals with the mechanics of solid bodies in contact, a subject intimately connected with such topics as fracture, hardness, and elasticity. Coverage begins with an introduction to the mechanical properties of materials, general fracture mechanics, and the fracture of brittle solids. It then provides a detailed description of indentation stress fields for both elastic and el...

Freund L.B. Dynamic Fracture Mechanics

  • формат djvu
  • размер 5.73 МБ
  • добавлен 03 апреля 2011 г.
© Cambridge University Press. 1998. 563 P. Published by the press syndicate of the university of Cambridge This book is in copyright. Subject to statutory exception and to tlie provisions of relevant collective licensing agreements, no reproduction of any part may take place without the written permission of Cambridge University Press. First published 1989 First paperback edition 1998 Printed in the United States of America Library of Congre...

Hutchinson J.W. Nonlinear Fracture Mechanics

  • формат pdf
  • размер 1.74 МБ
  • добавлен 26 марта 2011 г.
1979, 101 P. The notes contained within were prepared in conjunction with a set of lectures delivered during the fall of 1978 at The Solid Mechanics Department of the Technical University of Denmark under the auspices of the Danish Center for Applied Mathematics and Mechanics. Starting more or less from scratch in the subject, but assuming at least a limited knowledge of plasticity. I have tried to bring the reader right up to some of the topics...

Koliar L.P. Mechanics of composite structures

  • формат pdf
  • размер 33.06 МБ
  • добавлен 12 ноября 2010 г.
Cambridge University Press, 2003. - 480 p. The increased use of composites in aerospace, land, and marine applications has resulted in a growing demand for engineers versed in the design of structures made of fiber-reinforced composite materials. To satisfy this demand, and to introduce engineers to the subject of composites, numerous excellent texts have been published dealing with the mechanics of composites. These texts deal with those fndame...

Liu A.F. Mechanics and Mechanisms of Fracture: An Introduction

  • формат pdf
  • размер 22.76 МБ
  • добавлен 20 января 2012 г.
ASM International, 2005, ISBN: 0871708027, 458 pages This text is for readers who want an introductory overview on the mechanical and material factors of fracture in design analysis, material evaluation, and failure prevention. Both fundamental and practical concepts of fracture are described in terms of stress analysis and the mechanical behavior of materials. The metallurgical aspects of deformation and fracture in metals are also discussed....

Manevitch L.I., Gendelman O.V. (eds.) Tractable Models of Solid Mechanics: Formulation, Analysis and Interpretation

  • формат pdf
  • размер 7.77 МБ
  • добавлен 08 апреля 2011 г.
Springer, 2011. 363 p. ISBN-10:3642153712 This book describes significant tractable models used in solid mechanics - classical models used in modern mechanics as well as new ones. The models are selected to illustrate the main ideas which allow scientists to describe complicated effects in a simple manner and to clarify basic notations of solid mechanics. A model is considered to be tractable if it is based on clear physical assumptions which a...

Vasiliev V.V., Morozov E.V. Mechanics and Analysis of Composite Materials

  • формат pdf
  • размер 11.96 МБ
  • добавлен 11 ноября 2010 г.
Elsevier, 2001. - 412 p. This book is concerned with the topical problems of mechanics of advanced composite materials whose mechanical properties are controlled by high-strength and high-stiffness continuous fibers embedded in polymeric, metal, or ceramic matrix. Although the idea of combining two or more components to produce materials with controlled properties has been known and used from time immemorial, modern composites have been develop...

Voyiadjis G.Z., Kattan P. Mechanics of Composite Materials with MATLAB

  • формат pdf
  • размер 1.62 МБ
  • добавлен 13 апреля 2011 г.
Springer, 2005. - 336 Pages. This textbook makes use of the popular computer program MATLAB as the major computer tool to study mechanics of composite materials. It is written specifically for students in engineering and materials science, examining step-by-step solutions of composite material mechanics problems using MATLAB. Each of the 12 chapters is well structured and includes a summary of the basic equations, MATLAB functions used in the ch...

Wu H.-Ch. Continuum Mechanics and Plasticity

  • формат pdf
  • размер 7.08 МБ
  • добавлен 22 ноября 2011 г.
Монография. Boca Raton: CHAPMAN & HALL, 2004. – 685 с. Tremendous advances in computer technologies and methods have precipitated a great demand for refinements in the constitutive models of plasticity. Such refinements include the development of a model that would account for material anisotropy and produces results that compare well with experimental data. Key to developing such models-and to meeting many other challenges in the field- is a...