Liu A.F. Mechanics and Mechanisms of Fracture: An Introduction



Liu A.F. Mechanics and Mechanisms of Fracture: An Introduction
20.01.2012 в 22:03 22.76 МБ pdf 22 раза
ASM International, 2005, ISBN: 0871708027, 458 pages

This text is for readers who want an introductory overview on the mechanical and material factors of fracture in design analysis, material evaluation, and failure prevention. Both fundamental and practical concepts of fracture are described in terms of stress analysis and the mechanical behavior of materials. The metallurgical aspects of deformation and fracture in metals are also discussed. This book can serve as a desktop reference book, or a self-study book, for engineering students and practicing engineers with some, or without, prior training in solid mechanics and/or mechanical metallurgy. The focus is on how machine (or structural) parts fail, why one piece fails in a certain way and another piece fails differently; and engineering tools for analyzing and, ultimately, preventing failure. Metals occupy the main part of the book, but nonmetallic materials such as ceramics, plastics, and fiber reinforced polymer matrix composites are also included. The first two chapters of this book can be considered as the fundamentals of stress analysis and mechanical behavior of materials. Chapter 1 serves as a crash course (or a refresh course) in strength of materials that prepares the reader with the basic analytical tools for the rest of the book. Topics include: fracture mechanics, fatigue, and failures associated with high-temperature creep, stress-corrosion, corrosion-fatigue, and hydrogen-embrittlement. Numerous examples are given through out this book to illustrate the elastic and plastic behavior of materials at a stress raiser, and how the static, fatigue, and residual strengths of a machine part might have been affected by it.

Solid Mechanics of Homogeneous Materials
Deformation and Fracture Mechanisms and Static Strength of Metals
Fatigue Strength of Metals
Static and Dynamic Fracture Toughness of Metals
Damage Tolerance of Metals
Nonlinear Fracture Mechanics
Mechanical Behavior of Nonmetallic Materials
Mechanics of Fiber-Reinforced Composites
Lattice Structure and Deformation Mechanisms in Metallic Single Crystals
Close-Form Representation of Tangential Stress Distribution at Circular and Elliptical Holes
Nonarbitrary Crack Size Concept for Fatigue Crack Initiation
Fatigue Spectrum Editing
Stress Severity Factor
Specimen Orientation and Fracture Plane Identification
Mechanical Properties Data for Selected Aluminum Alloys
Mechanical Properties Data for Selected Titanium Alloys
Mechanical Properties Data for Selected Titanium Aluminides
Mechanical Properties Data for Selected Steels

Скачать файл

Комментарии


Смотрите также


Fischer-Cripps A.C. Introduction to Contact Mechanics

Fischer-Cripps A.C. Introduction to Contact Mechanics

разное
2nd edition, Springer Science+Business Media, 2007, 221 pages

This book deals with the mechanics of solid bodies in contact, a subject intimately connected with such topics as fracture, hardness, and elasticity. Coverage begins with an introduction to the mechanical properties of materials, general fracture mechanics, ...
27.09.2011 в 19:38 8.03 МБ 28 раз
Bui H.D. Fracture Mechanics. Inverse Problems and Solutions

Bui H.D. Fracture Mechanics. Inverse Problems and Solutions

разное
Springer, 2006. - 375 p.

Today, Fracture Mechanics is a well known topic within the scientific community. Applications of Fracture Mechanics can be found in various fields ranging from solid mechanics and structures to materials sciences and computational mechanics. However, most of these results apply only to linear f...
01.08.2011 в 11:16 19.02 МБ 20 раз
Hutchinson J.W., Wu T.Y. Advances in Applied Mechanics

Hutchinson J.W., Wu T.Y. Advances in Applied Mechanics

разное
Монография, New York, Academic Press, 1983, 454 стр., V. 23.

Micromechanics of Crystals and Polycrystals.
Mechanisms of Deformation and Fracture.
Recent Developments Concerning Saint-Venant’s Principle.
Nonlinear Elastic Shell Theory.
Elastic Surface Waves with Transverse Horizontal Polarization.
24.12.2011 в 18:48 19.44 МБ 12 раз
Freund L.B. Dynamic Fracture Mechanics

Freund L.B. Dynamic Fracture Mechanics

разное
© Cambridge University Press. 1998. 563 P.

Published by the press syndicate of the university of Cambridge

This book is in copyright. Subject to statutory exception and to tlie provisions of relevant collective licensing agreements, no reproduction of any part may take place without the written permission of Ca...
03.04.2011 в 21:12 5.73 МБ 27 раз
Hutchinson J.W. Nonlinear Fracture Mechanics

Hutchinson J.W. Nonlinear Fracture Mechanics

разное
1979, 101 P.

The notes contained within were prepared in conjunction with a set of lectures delivered during the fall of 1978 at The Solid Mechanics Department of the Technical University of Denmark under the auspices of the Danish Center for Applied Mathematics and Mechanics. Starting more or less from scratch in the s...
26.03.2011 в 19:59 1.74 МБ 15 раз
Brodberg K.B. Cracks and fracture

Brodberg K.B. Cracks and fracture

разное

1999. , 752 pages

From Introduction:

What is fracture? The simplest answer would be: "the process of breaking" or "the condition of being broken". Actually, both fracture and break can be traced to the same Indo-European root, bhreg (to break). Each term can be either a noun or a verb.

Common-day ...
23.11.2009 в 04:16 6.21 МБ 75 раз
Bunch J.O., Mitchel M.R. (editors) Residual Stress Effects on Fatigue and Fracture Testing and Incorporation of Results Into Design

Bunch J.O., Mitchel M.R. (editors) Residual Stress Effects on Fatigue and Fracture Testing and Incorporation of Results Into Design

разное
ASTM special technical publication, STP 1497. 164 р.

This publication, Residual Stress Effects on Fatigue and Fracture Testing and Incorporation of Results into Design, contains papers presented at the Symposium on Residual Stress, which was held in Salt Lake City, UT on 19-20 May, 2004. The symposium was sponsored by A...
04.12.2011 в 16:29 5.22 МБ 14 раз
Bourdin B., Francfort G.A., Marigo J.-J. The Variational Approach to Fracture

Bourdin B., Francfort G.A., Marigo J.-J. The Variational Approach to Fracture

разное
Springer, 2008.164 Pages.
Presenting original results from both theoretical and numerical viewpoints, this text offers a detailed discussion of the variational approach to brittle fracture. This approach views crack growth as the result of a competition between bulk and surface energy, treating crack evolution from its initi...
16.08.2011 в 12:02 1.21 МБ 13 раз
Voyiadjis G.Z., Kattan P. Mechanics of Composite Materials with MATLAB

Voyiadjis G.Z., Kattan P. Mechanics of Composite Materials with MATLAB

разное
Springer, 2005. - 336 Pages.

This textbook makes use of the popular computer program MATLAB as the major computer tool to study mechanics of composite materials. It is written specifically for students in engineering and materials science, examining step-by-step solutions of composite material mechanics problems using M...
13.04.2011 в 03:42 1.62 МБ 20 раз
Manevitch L.I., Gendelman O.V. (eds.) Tractable Models of Solid Mechanics: Formulation, Analysis and Interpretation

Manevitch L.I., Gendelman O.V. (eds.) Tractable Models of Solid Mechanics: Formulation, Analysis and Interpretation

разное
Springer, 2011. 363 p. ISBN-10:3642153712

This book describes significant tractable models used in solid mechanics - classical models used in modern mechanics as well as new ones. The models are selected to illustrate the main ideas which allow scientists to describe complicated effects in a simple manner and to clarif...
08.04.2011 в 06:37 7.77 МБ 18 раз