API Spec 16D-2005 Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment

Стандарт
  • формат pdf
  • размер 872.06 КБ
  • добавлен 08 февраля 2012 г.
American Petroleum Institute (API) Second Edition, March 2002. Effective Data, January 2005. 110p. These specifications establish design standards for systems, that are used to control blowout preventers (BOPs) and associated valves that control well pressure during drilling operations.

API RP 2FPS-2001 Recommended Practice for Planning, Designing, and Constructing Floating Production Systems

  • формат pdf
  • размер 1.8 МБ
  • добавлен 08 февраля 2012 г.
American Petroleum Institute (API) First Edition, March 2002. 99p. This Recommended Practice (RP) provides guidelines for design, fabrication, installation, inspection and operation of Floating Production Systems (FPSs). The basic function of a FPS is to receive hydrocarbons from the wellhead, process the hydrocarbons, and store and/or ofЯoad the product to a shuttle tanker or convey it to a pipeline system

API RP 2FB-2006 Recommended Practice for the Design of Offshore Facilities Against Fire and Blast Loading

Стандарт
  • формат pdf
  • размер 715.9 КБ
  • добавлен 08 февраля 2012 г.
American Petroleum Institute (API) First Edition, April 2002. 76p. This document provides guidelines and recommended practice for the satisfactory design of offshore structures against fire and blast loading.

API 1130-2002 Computational Pipeline Monitoring for Liquid Pipelines

Стандарт
  • формат pdf
  • размер 282.18 КБ
  • добавлен 08 февраля 2012 г.
American Petroleum Institute (API) Second Edition, November 2002. 36p. This publication focuses on the design, implementation, testing and operation of CPM systems that use an algorithmic approach to detect hydraulic anomalies in pipeline operating parameters.

API RP 74-2007 Recommended Practice for Occupational Safety for Onshore Oil and Gas Production Operations

Стандарт
  • формат pdf
  • размер 378.2 КБ
  • добавлен 07 февраля 2012 г.
American Petroleum Instltute (API) First Edition, October 2001, Reaffirmed, March 2007. 36p. The purpose of this document is to recommend practices and procedures for promotion and maintenance of safe working conditions for personnel engaged in onshore oil and gas production, including special services.

API RP 14FZ-2001 Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations

Стандарт
  • формат pdf
  • размер 1.03 МБ
  • добавлен 07 февраля 2012 г.
American Petroleum Instltute (API) First Edition, September 2006. 127p. This document recommends minimum requirements and guidelines for the design and installation of electrical systems on fixed and floating petroleum facilities located offshore when hazardous locations are classified as Zone 0, Zone 1, or Zone 2.

API RP 14F-1999 Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Division 1 and Division 2 Locations

Стандарт
  • формат pdf
  • размер 979.25 КБ
  • добавлен 07 февраля 2012 г.
American Petroleum Instltute (API) Fourth Edition, June 1999. 104p. This document recommends minimum requirements and guidelines for the design and installation of electrical systems on fixed and floating petroleum facilities located offshore

API Std 614-1999 Lubrication, Shaft-Sealing, and Control-Oil Systems and Auxiliaries for Petroleum, Chemical and Gas Industry Services

Стандарт
  • формат pdf
  • размер 926.67 КБ
  • добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Fourth Edition, April 1999. 240p. This international standard covers the minimum requirements for lubrication systems, oil-type shaft-sealing systems, dry gas face-type shaft-sealing systems, and controloil systems for general or special purpose applications

ANSI/API Std 521-2007 Pressure-relieving and Depressuring Systems, ISO 23251 (Identical)

Стандарт
  • формат pdf
  • размер 4.06 МБ
  • добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Fifth Edition, January 2007. 202p. This International Standard is applicable to pressure-relieving and vapour-depressuring systems. Although intended for use primarily in oil refineries, it is also applicable to petrochemical facilities, gas plants, liquefied natural gas (LNG) facilities and oil and gas production facilities.

API RP 581-2008 Risk-Based Inspection Technology

Стандарт
  • формат pdf
  • размер 5.98 МБ
  • добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Second Edition, September 2008. 654p. This publication provides quantitative procedures to establish an inspection program using risk-based methods for pressurized fixed equipment, including pressure vessel, piping, tankage, pressure relief devices, and heat exchanger tube bundles. This document is to be used in conjunction with API 580, which provides guidance on developing a riskbased inspection program for fi...

API RP 2A-WSD-2002 Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design

Стандарт
  • формат pdf
  • размер 2 МБ
  • добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Twenty-First Edition, December 2000, Errata and Supplement 1, December 2002. 242p. This publication serves as a guide for those who are concerned with the design and construction of new platforms and for the relocation of existing platforms used for the drilling, development, and storage of hydrocarbons in offshore areas

API RP 14G-1993 Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms

Стандарт
  • формат pdf
  • размер 2.93 МБ
  • добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Third Edition, December 1993. 39p. This RP presents recommendations for minimizing the likelihood of having an accidental fire, and for designing, inspecting, and maintaining fire control systems. It emphasizes the need to train personnel in fire fighting, to conduct routine drills, and to establish methods and procedures for safe evacuation.

API RP 75-2004 Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities

Стандарт
  • формат pdf
  • размер 280.14 КБ
  • добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Third Edition, May 2004. 52p. This recommended practice is intended to assist in development of a management program designed to promote safety and environmental protection during the performance of offshore oil and gas and sulphur operations.

API RP 520-1-2000 Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries Part I - Sizing and Selection

Стандарт
  • формат pdf
  • размер 1015.88 КБ
  • добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Seventh Edition, January 2000. 100p. This recommended practice applies to the sizing and selection of pressure relief devices used in refineries and related industries for equipment that has a maximum allowable working pressure of 15 psig [103 kPag] or greater.

API RP 520-2-2003 Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries Part II - Installation

Стандарт
  • формат pdf
  • размер 539.41 КБ
  • добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Fifth Edition, August 2003. 42p. This recommended practice covers methods of installation for pressure-relief devices for equipment that has a maximum allowable working pressure (MAWP) of 15 psig (1.03 bar g or 103 kPA) or greater

API RP 555-2001 Process Analyzers

Стандарт
  • формат pdf
  • размер 3.55 МБ
  • добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Second Edition, November 2001. 246p. Process monitors that measure and transmit information about chemical composition, physical properties, or chemical properties are known as process analyzer systems. Many of these systems were first developed for laboratory analysis. Today they are primarily used as continuous on-line analyzers.

API RP 59-2006 Recommended Practice for Well Control Operations

Стандарт
  • формат pdf
  • размер 4.11 МБ
  • добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Second Edition, May 2006. 106p. The purpose of these recommended practices is to provide information that can serve as a voluntary industry guide for safe well control operations. This publication is designed to serve as a direct field aid in well control and as a technical source for teaching well control principles.

API Std 510-2006 Pressure Vessel Inspection Code In-Service Inspection, Rating, Repair and Alteration

Стандарт
  • формат pdf
  • размер 2.81 МБ
  • добавлен 05 февраля 2012 г.
American Petroleum Instltute (API) Ninth Edition, June 2006. 20p. This inspection code covers the in-service inspection, repair, alteration, and rerating activities for pressure vessels and the pressure-relieving devices protecting these vessels.

API Spec 5L-2004 Specification for Line Pipe

Стандарт
  • формат pdf
  • размер 1.22 МБ
  • добавлен 04 февраля 2012 г.
American Petroleum Institute (API) Forty-third Edition, March 2004, Effective Date: October 2004. 171p. The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.

API Std 2000-1982 Venting Atmospheric and Low-Pressure Storage Tanks

Стандарт
  • формат pdf
  • размер 1.66 МБ
  • добавлен 03 февраля 2012 г.
American Petroleum Instltute (API) Third Edition, January 1982. 18p. This standard covers the normal and emergency venting requirements for aboveground liquid petroleum storage tanks and aboveground and belowground refrigerated storage tanks designed for operation at pressures form 1/2 ounce per square inch vacuum through 15 pounds inch gage.

ANSI ISA 67.01.01-2007 Transducer and Transmitter Installation for Nuclear Safety Applications

Стандарт
  • формат pdf
  • размер 74.48 КБ
  • добавлен 03 февраля 2012 г.
Instrument Society of America (ISA). July 2007. ISBN: 978-1-934394-47-2. 27p. This document establishes requirements and recommendations for the installation of transducers and auxiliary equipment for nuclear applications outside of the main reactor vessel.

API Std 653-2009 Tank Inspection, Repair, Alteration, and Reconstruction

Стандарт
  • формат pdf
  • размер 2.09 МБ
  • добавлен 03 февраля 2012 г.
American Petroleum Instltute (API) Fourth Edition, April 2009. 166p. This standard covers steel storage tanks built to API 650 and its predecessor API 12C. It provides minimum requirements for maintaining the integrity of such tanks after they have been placed in service and addresses inspection, repair, alteration, relocation, and reconstruction.

API Std 2510-2001 Design and Construction of LPG Installations

Стандарт
  • формат pdf
  • размер 267.18 КБ
  • добавлен 03 февраля 2012 г.
American Petroleum Instltute (API) Eighth Edition, May 1995. 34p. This standard covers the design, construction, and location of liqueЮed petroleum gas (LPG) installations at marine and pipeline terminals, natural gas processing plants, reЮneries, petrochemical plants, or tank farms.

API Std 526-2002 Flanged Steel Pressure Relief Valves

Стандарт
  • формат pdf
  • размер 435.38 КБ
  • добавлен 03 февраля 2012 г.
American Petroleum Instltute (API) Fifth Edition, June 1995. 23p. This standard is a purchase speciЮcation for Яanged steel pressure relief valves. Basic requirements are given for direct spring-loaded pressure relief valves and pilot-operated pressure relief valves.

API RP 551-1993 Process Measurement Instrumentation

Стандарт
  • формат pdf
  • размер 4.19 МБ
  • добавлен 03 февраля 2012 г.
American Petroleum Instltute (API) First Edition, May 1991. 68p. The procedures for installation of the instruments covered in this recommended practice are based on experience with and evaluation of many installations.

API RP 14E-1991 Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems

Стандарт
  • формат pdf
  • размер 3.97 МБ
  • добавлен 03 февраля 2012 г.
American Petroleum Instltute (API) Fifth Edition, October. 1991. Reaffirmed June 2000. 62p. This document recommends minimum requirements and guidelines for the design and installation of new piping systems on production platforms located offshore

API Spec 2B-2002 Specification for the Fabrication of Structural Steel Pipe

Стандарт
  • формат pdf
  • размер 128.63 КБ
  • добавлен 02 февраля 2012 г.
American Petroleum Institute (API) Fifth Edition, January 2002. 19p. This specification covers the fabrication of structural steel pipe formed from plate steel with longitudinal and circumferential butt-welded seams, typically in sizes 14 in. outside diameter (OD) and larger (40 in. and larger for LWDS) with wall thickness 3/8 in. and greater (up to a nominal 40 ft in length) suitable for use in construction of welded offshore structures.

API RP 2FPS-2001 Recommended Practice for Planning, Designing, and Constructing Floating Production Systems

Стандарт
  • формат pdf
  • размер 1.8 МБ
  • добавлен 02 февраля 2012 г.
American Petroleum Institute (API) First Edition, March 2001. 99p. This Recommended Practice (RP) provides guidelines for design, fabrication, installation, inspection and operation of Floating Production Systems (FPSs).

API Spec 5L-2000 Specification for Line Pipe

Стандарт
  • формат pdf
  • размер 904.97 КБ
  • добавлен 02 февраля 2012 г.
American Petroleum Institute (API) Forty-second Edition, July 2000. 168p. The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.

API RP 2D-2003 Operation and Maintenance of Offshore Cranes

Стандарт
  • формат pdf
  • размер 944.77 КБ
  • добавлен 02 февраля 2012 г.
American Petroleum Institute (API) Fifth Edition, June 2003. 54p. This Recommended Practice is intended to serve as a guide to crane owners and operators in developing operating and maintenance practices and procedures for use in the safe operation of pedestal-mounted revolving cranes on fixed or oating offshore platforms, jackup drilling rigs, semisubmersible drilling rigs and other types of mobile offshore drilling units (MODUs).

ANSI/AISC 360-05 Specification for Structural Steel Buildings

Стандарт
  • формат pdf
  • размер 7.63 МБ
  • добавлен 02 февраля 2012 г.
American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 519p. This Specification has been based upon past successful usage, advances in the state of knowledge, and changes in design practice. The 2005 American Institute of Steel Construction’s Specification for Structural Steel Buildings for the first time provides an integrated treatment of Allowable Stress Design (ASD) and Load and Resistance Factor Design (LRFD), and thus com...

ANSI/AISC 358-05 Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications

Стандарт
  • формат pdf
  • размер 1.12 МБ
  • добавлен 02 февраля 2012 г.
American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 90p. This Standard specifies design, detailing, fabrication and quality criteria for connections that are prequalified in accordance with the AISC Seismic Provisions for Structural Steel Buildings (herein referred to as the AISC Seismic Provisions) for use with special moment frames (SMF) and intermediate moment frames (IMF).

AISC 303-05 Code of Standard Practice for Steel Buildings and Bridges

Стандарт
  • формат pdf
  • размер 591.7 КБ
  • добавлен 02 февраля 2012 г.
American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 80p. In the absence of specific instructions to the contrary in the Contract Documents, the trade practices that are defined in this Code shall govern the fabrication and erection of Structural Steel.

API RP 68-1998 Recommended Practice for Oil and Gas Well Servicing and Workover Operations Involving Hydrogen Sulfide

Стандарт
  • формат pdf
  • размер 3.18 МБ
  • добавлен 02 февраля 2012 г.
American Petroleum Institute (API) First Edition, January 1998. 49p. Recommendations set forth in this publication apply to oil and gas well servicing and workover operations involving hydrogen sulfide.

API Std 1631-2001 Interior Lining and Periodic Inspection of Underground Storage Tanks

Стандарт
  • формат pdf
  • размер 1.94 МБ
  • добавлен 02 февраля 2012 г.
American Petroleum Institute (API) Fifth Edition, June 2001. 30p. The following definitions are applicable to underground tank lining and inspection as described in this standard.

ANSI/API Std 2015-2001 Requirements for Safe Entru and Cleaning of Petroleum Storage Tanks

Стандарт
  • формат pdf
  • размер 4.68 МБ
  • добавлен 02 февраля 2012 г.
American Petroleum Institute (API) Sixth Edition, August 2001. 58p. This standard is applicable to cleaning stationaru atmospheric and lov-pressure (up to and including 15 psig) aboveground petroleum storage tanks used in all sectors of the petroleum and petrochemical industry, including crude oil and gas production, refineries, petrochemical plants, bulk plants and terminals.

AWS A5.22/A5.22M: 2010 Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods

Стандарт
  • формат pdf
  • размер 671.94 КБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 2010. 68p. This specification prescribes requirements for the classification of flux cored stainless steel electrodes for flux cored arc welding, flux cored stainless steel rods for root pass welding with the gas tungsten arc process, and metal cored stainless steel electrodes for gas metal arc welding, gas tungsten arc welding, plasma arc welding, submerged arc welding, and any other process to which...

AWS QC17: 2008 Specification for AWS Accreditation of Certified Welding Fabricators

Стандарт
  • формат pdf
  • размер 126.52 КБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 2008. 18p. This specification establishes the procedure by which a welding fabricator may seek, obtain, and maintain accreditation from AWS to participate in the AWS Certified Welding Fabricator Program.

AWS QC15: 2008 Specification for the Certification of Radiographic Interpreters

Стандарт
  • формат pdf
  • размер 147.97 КБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 2008. 20p. This specification establishes the requirements and procedures for the certification of radiographic interpreters by the American Welding Society (AWS). It describes how personnel are certified, and outlines the principles of conduct and practices by which certification may be maintained.

AWS SENSE QC10: 2006 Specification for Qualification and Certification of Level I-Entry Welder

Стандарт
  • формат pdf
  • размер 2.04 МБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 2006. 35p. This standard establishes the minimum requirements for qualification and certification as a SENSE Level I-Entry Welder with the American Welding Society.

AWS QC5-91 AWS Standard for Certification of Welding Educators

Стандарт
  • формат pdf
  • размер 560.42 КБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 1991. 12p. This Standard establishes minimum requirements for Test Facilities, their personnel, and equipment to qualify for accreditation to test and qualify welders in the AWS Certified Welder Program.

AWS QC4-89 Standard for Accreditation of Test Facilities for AWS Certified Welder Program

Стандарт
  • формат pdf
  • размер 668.56 КБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 1989. 14p. This Standard establishes minimum requirements for Test Facilities, their personnel, and equipment to qualify for accreditation to test and qualify welders in the AWS Certified Welder Program.

AWS B5.17-2008 Specification for the Qualification of Welding Fabricators

Стандарт
  • формат pdf
  • размер 171.63 КБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 2008. 22p. This specification establishes the minimum requirements for the Welding Quality Program for Welding Fabricators. This specification is intended to be used by welding fabricators regardless of the welding processes or materials used.

AWS A5.18/A5.18M: 2005 Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding

Стандарт
  • формат pdf
  • размер 403.88 КБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 2005. 44p. This specification prescribes requirements for theиclassification of carbon steel electrodes (solid, compositeиstranded, and composite metal cored) and rods (solid) forиgas metal arc (GMAW), gas tungsten arc (GTAW), and plasma arc (PAW) welding.

AWS A5.20/A5.20M: 2005 Specification for Carbon Steel Electrodes for Flux Cored Arc Welding

Стандарт
  • формат pdf
  • размер 525.92 КБ
  • добавлен 28 января 2012 г.
This standard American Welding Society (AWS). 2005. 50p. This specification prescribes requirements for the classification of carbon steel electrodes for flux cored arc welding (FCAW) either with or without shielding gas.

ANSI Z49.1: 2005 Safety Welding, Cutting and Alled Processes

Стандарт
  • формат pdf
  • размер 635.11 КБ
  • добавлен 28 января 2012 г.
This standard American Welding Society (AWS). 2005. 68p. This standard shall be for the guidance of educators, ooerators, managers, and supervisors in the safe setup and use of welding and cutting equipment, and the safe performance of welding and cutting operations.

AWS D17.3/D17.3M: 200X Draft. Specification for Friction Stir Welding of Aluminum Alloys for Aerospace Hardware

Стандарт
  • формат pdf
  • размер 1.3 МБ
  • добавлен 28 января 2012 г.
This standard American Welding Society (AWS). Draft. 60p. This specification contains the requirements for designing, friction stir welding, and inspecting aluminum, aerospace hardware. Friction stir welding (FSW) produces a weld between two butting workpieces by the friction heating and plastic material displacement caused by a rotating tool that traverses along the weld joint. This is a working document under consideration by an AWS Committee....

AWS TSD 1.1: 2011 Specification for the Preparation of American Welding Society Standards

Стандарт
  • формат pdf
  • размер 560.33 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2011. 81p. This specification establishes the requirements for all American Welding Society (AWS ) standards for the purpose of achieving uniformity of structure, terminology, and style in individual documents and between associated documents.

AWS QC19: 2002 Specification for AWS Certification of Robotic Arc Welding Personnel

Стандарт
  • формат pdf
  • размер 2.94 МБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2002. 24p. This standard establishes the requirements for AWS certification of robotic arc welding operators and technicians. It describes how personnel are certified, and the principles of conduct and practice by which certification may be maintained.

AWS QC14: 2009 Specification for the Certification of Welding Sales Representatives

Стандарт
  • формат pdf
  • размер 98.84 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2009. 18p. This specification establishes the requirements for certification and maintenance of certification in accordance with qualification requirements stated in AWS B5.14, Specification for the Qualification of Welding Sales Representatives.

AWS QC13: 2006 Specification for the Certification of Welding Supervisors

Стандарт
  • формат pdf
  • размер 133.24 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2006. 18p. This standard establishes the requirements for certification and maintenance of certification in accordance with qualification requirements stated in AWS B5.9:2006, Specification for the Qualification of Welding Supervisors.

AWS QC7-93 Supplement G - AWs Performance Qualification Test

Стандарт
  • формат pdf
  • размер 492.32 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 1993. 12p. This Supplement to the AWS QC7-93, Standard for AWS Certified Welders, provides a welder certification method not specifically based on a code but which may be acceptable for various codes.

AWS QC7-93 Supplement F - Chemical Plant and Petroluem Refinery Piping

Стандарт
  • формат pdf
  • размер 755.34 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 1993. 24p. Supplement F of AWS QC7-93, Standard for AWS Certified Welders, was developed using as references ANSI/ASME B31.3, Chemical Plant and Petroleum Refinery Piping and ASME Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualifications. American Welding Society makes no assessment of WPS or PQR compliance with either of these standards nor of their usability in production weldi...

AWS QC7-93 Supplement C - Welder Performance Qualification Sheet Metal Test Requirements

Стандарт
  • формат pdf
  • размер 1.21 МБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 1993. 40p. This Supplement C to AWS QC7- 93. Standard for AWS Certified Welders, specifies requirements intended to provide an alternative welders certification method.

AWS QC7-93 Standard for AWS Certified Welders

Стандарт
  • формат pdf
  • размер 518.59 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 1993. 12p. The rules for the American Welding Society (AWS) Certified Welder Program and the requirements for maintenance of certification are provided in this standard.

AWS QC1: 2007 Standard for AWS Certification of Welding Inspectors

Стандарт
  • формат pdf
  • размер 171.2 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2007. 24p. This standard establishes the requirements for AWS certification of welding inspection personnel. It describes how personnel are certified, and the principles of conduct and practice by which certification may be maintained

AWS D16.4M/D16.4: 2005 Specification for the Qualification of Robotic Arc Welding Personnel

Стандарт
  • формат pdf
  • размер 237.09 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2005. 24p. This standard provides specifications for the qualification of robotic arc welding personnel. This standard does not prevent a manufacturer, fabricator, or contractor from continuing to qualify robotic welding personnel according to other standards.

AWS D9.1M/D9.1: 2006 Sheet Metal Welding Code (Eng)

Стандарт
  • формат pdf
  • размер 702.19 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2006. 72p. This code provides qualification, workmanship, and inspection requirements for both arc welding (Part A) and braze welding (Part B), as they apply to the fabrication, manufacture, and erection of nonstructural sheet metal components and systems.

ASTM A751 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

Стандарт
  • формат pdf
  • размер 28.64 КБ
  • добавлен 26 января 2012 г.
Американский стандарт определяет нормированные методы химического анализа стальной продукции (обычные углеродистые и нержавеющие марки сталей и сплавы на их основе), определяет методологию, ссылочные материалы и технику проведения анализов. This standard covers definitions, reference methods, practices, and guides relating to the chemical analysis of steel, stainless steel, and related alloys. It includes both wet chemical and instrumental tech...

API RP 578. Material Verification Program for New and Existing Alloy Piping Systems

Стандарт
  • формат pdf
  • размер 216.3 КБ
  • добавлен 26 января 2012 г.
The purpose of this recommended practice is to provide the guidelines for a material and quality assurance system to verify that the nominal composition of alloy components within the pressure envelope of a piping system is consistent with the selected or specified construction materials to minimize the potential for catastrophic release of toxic or hazardous liquids or vapors.