BS EN 1011-4: 2000+A1: 2003 Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys (Eng)

This European Standard was approved by CEN on 26 January 1998 and amendment A1 was approved by CEN on 1 April 2002; amendment A2 was approved by CEN on 30 November 2003. 16p. This European Standard gives general guidance for fusion welding of metallic materials in all forms of product (e.g. cast, wrought, extruded, forged). The processes and techniques referred to in this part of EN 1011 may not all be applicable to all materials. Additional info...

This European Standard was approved by CEN on 6 July 2000 and amendment A1 was approved by CEN on 20 November 2003. 62p. This European Standard gives guidance for manual, semi-mechanized, mechanized and automatic arc welding of ferritic steels (see clause 5), excluding ferritic stainless steels, in all product forms.

This European Standard was approved by CEN on 13 August 2000, and amendment A1 was approved by CEN on 20 November 2003. 32p. This European Standard gives general recommendations for the fusion welding of stainless steels. Specific details relevant to austenitic, austenitic-ferritic, ferritic and martensitic stainless steels are given in annexes A to D.

This European Standard was approved by CEN on 28 February 2003. 14p. This European Standard gives general recommendations for welding of clad steels by means of appropriate arc welding processes and electroslag strip cladding. It is generally applicable to all clad steels and is appropriate regardless of the type of fabrication involved, although the application standard may have additional requirements. Non-ferrous claddings, such as titanium, t...

This European Standard was approved by CEN on 28 November 2005. 44p. This European Standard gives general quidance fir laser beam welding and associated processes of metallic materials inallforms of product (e.g. cast, wrought, extruded, forged).

This European Standard was approved by CEN on 30 April 2004. 44p. This document may be used for the electron beam welding (process no. 51 according to EN ISO 4063) of weldable metallic materials according to CR ISO 15608. It does not contain data on permissible stresses on weld seams or on the testing and evaluation of weld seams. Such data can either be seen from the relevant application standards or should be separately agreed between the contr...

This European Standard was approved by CEN on 14 October 2004. 32p. This document describes the basic verification tests, the testing methods, the amount of testing and the requirements for the qualification of wire electrodes, wires and rods for welding of aluminium.

This European Standard was approved by CEN on 5 August 1992. Amendment A1 was approved on 1996-12-11. 30 р. This standard specifies how a welding procedure specification is approved by welding procedure tests.

2002, - 236 p. The book provides a basic understanding of the metallurgical principles involved in how alloys achieve their strength and how welding can affect these properties. I have included sections on parent metal storage and preparation prior to welding and have also described the more frequently encountered processes. There are recommendations on welding parameters that may be used as a starting point for the development of a viable weldin...