14 cтр.
The European Standard EN 10246-12:2000 has the status of a British
Standard
February 2000
This part of EN 10246 specifies the requirements and the acceptance
levels for magnetic particle inspection of seamless and welded
ferromagnetic steel tubes for the detection of surface
imperfections.
This part of EN 10246 is to be used for the detection of surface
imperfections on the entire or any part of the outer surface of
tubes, excluding the end bevel/face.
In addition, this standard may be used, as appropriate, to locate
the position of exteal surface imperfections, detected by another
non-destructive testing method, e.g. ultrasonic, prior to dressing
of the tube surface and to ensure complete removal of the
imperfection after dressing is complete.
European Standard EN 10246, Non-destructive testing of steel tubes,
comprises the parts shown in Annex A.
BS EN 10246-12: 2000 Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
Похожие разделы
Смотрите также
BS EN 10246-11: 2000 Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections
15 стр. The European Standard EN 10246-10:2000 has the status of a British Standard February 2000 This part of EN 10246 specifies requirements and acceptance levels for liquid penetrant testing of seamless and welded tubes for the detection of surface imperfections. This part of EN 10246 is applicable to all the tube surface. European Standard EN 10246, Non-destructive testing of steel tubes, comprises the parts shown in Annex A. This part of EN...
BS EN 10246-13: 2000 Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes
10 cтр. The European Standard EN 10246-13:2000 has the status of a British Standard February 2000 This part of EN 10246 specifies the requirements for the full peripheral ultrasonic testing of seamless and welded steel tubes, with the exception of submerged arc welded (SAW) tubes, for wall thickness measurement. The standard specifies acceptance levels and calibration procedures. NOTE 1: Full peripheral testing does not necessarily mean that 100...
BS EN 10246-14: 2000 Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections
16 стр. The European Standard EN 10246-14:1999 has the status of a British Standard November 1999 This Part of EN 10246 specifies requirements for automatic ultrasonic testing of seamless and welded steel tubes, with the exception of submerged arc welded (SAW) tubes, for the detection of laminar imperfections. The standard specifies acceptance levels and calibration procedures. NOTE : An alternative test method for the detection of laminar imperf...
BS EN 10246-16: 2000 Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
16 стр. The European Standard EN 10246-16:2000 has the status of a British Standard February 2000 This part of EN 10246 specifies requirements for the ultrasonic testing of the area adjacent to the weld of welded steel tubes for the detection of laminar imperfections. The standard specifies acceptance levels and calibration procedures. NOTE: This inspection may alternatively, in accordance with EN 10246-15, be carried out on longitudinal edges of...
BS EN 10246-17: 2000 Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections
12 стр. The European Standard EN 10246-17:2000 has the status of a British Standard February 2000 This part of EN 10246 specifies requirements for the full peripheral ultrasonic testing of the ends of seamless and welded tubes for the detection of laminar imperfections. The standard specifies acceptance levels and calibration procedures. This part of EN 10246 is applicable to the inspection of welded tubes with an outside diameter greater than 30...
BS EN 10246-18: 2000 Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections
10 стр. The European Standard EN 10246-18:2000 has the status of a British Standard February 2000 This part of EN 10246 specifies the requirements for magnetic particle inspection of the end/bevel face at the ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections. This part of EN 10246 is to be used for the detection of laminar imperfections on the end/bevel face at the ends of plain end and bevelled end...
BS EN 10246-1: 1996 Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
18 стр. The European Standard EN 10246-10:2000 has the status of a British Standard July 1996 This Part of EN 10246 specifies the requirements for automatic electromagnetic testing of seamless and welded ferromagnetic steel tubes, with the exception of submerged arc-welded (SAW) tubes, for verification of hydraulic leak-tightness. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter greater than or equal to 4 mm...
BS EN 10246-3: 2000 Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
18 стр. The European Standard EN 10246-3:1999 has the status of a British Standard November 1999 This Part of EN 10246 specifies the requirements for automatic eddy current testing of seamless and welded tubes with the exception of submerged arc-welded (SAW) tubes for the detection of imperfections. The standard specifies acceptance levels, calibration procedures and gives guidance on the limitations of the tests. This Part of EN 10246 is applica...
BS EN 10246-4: 2000 Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections
16 стр. The European Standard EN 10246-4:1999 has the status of a British Standard November 1999 This Part of EN 10246 specifies the requirements for automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections. The standard specifies acceptance levels, calibration procedures and gives guidance on the limitations of the tests. This Part of EN 10246 is applic...
BS EN 10246-5: 2000 Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal im
16 cтр. The European Standard EN 10246-5:1999 has the status of a British Standard November 1999 This Part of EN 10246 specifies the requirements for automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded ferromagnetic steel tubes, with the exception of submerged arc welded (SAW) tubes, for the detection of longitudinal imperfections. The standard specifies acceptance levels, calibration procedures and gives gui...