• формат pdf
  • размер 315.96 КБ
  • добавлен 21 декабря 2011 г.
ISO 13918: 2008 Welding - Studs and ceramic ferrules for arc stud welding (Eng)
This Inteational standard was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 10, Unification of requirements in the field of metal welding. 2008-02-15. 40p. This Inteational Standard specifies:
- requirements for studs and ceramic ferrules for arc stud welding;
- dimensions, materials, mechanical properties and, when required, conditions of evaluation of conformity.
Возможность скачивания данного файла заблокирована по требованию правообладателя.
Смотрите также

AWS A5.01M/A5.01: 2008 Procurement Guidelines for Consumables-Welding and Allied Processes-Flux and Gas Shielded Electrical Welding Processes / Стандарт американского сварочного общества (ENG)

  • формат pdf
  • размер 251.5 КБ
  • добавлен 03 декабря 2011 г.
Approved by the American National Standards Institute April 4, 2008, 40 p. This standard is a tool for communication between a purchaser and a supplier of welding consumables within quality systems as might, for example, be based upon ISO 9001. This standard, together with an AWS, ISO, or other recognized welding consumable standard, provides a method for preparing those specific details needed for welding consumable procurement which consist o...

AWS A5.15-90/ASME SFA-5.14 Specification for Weld8ng Electrodes and Rods for Cast Iron (Eng)

  • формат pdf
  • размер 227.49 КБ
  • добавлен 10 января 2012 г.
This standard American Welding Society (AWS). 1990. 18p. This specification prescribes requirements for the classification of the following: (a) Rods for oxyfuel gas welding; (b) Electrodes for gas metal arc welding; (c) Electrodes for flux cored arc welding; (d) Electrodes for shielded metal arc welding.

AWS B5.17: 2004 Specification for the Qualification of Welding Fabricators (Eng)

  • формат pdf
  • размер 236.15 КБ
  • добавлен 12 января 2012 г.
This standard American Welding Society (AWS). 2004. 18p. This specification establishes the minimum requirements for the Welding Quality Program for Welding Fabricators (WF). This specification is intended to be used by companies regardless of the welding processes or materials used.

Blondeau R. (Ed.) Metallurgy and Mechanics of Welding

  • формат pdf
  • размер 7.81 МБ
  • добавлен 05 января 2012 г.
Wiley-ISTE Ltd, 2008, 496 pages This book offers a comprehensive overview on the subject of welding. The first part of the book provides a review of the various different welding processes in use, including both traditional and more recent high energy input welding techniques. It then goes on the deal with the entire set of thermal, metallurgical and mechanical phenomena in the heat affected zone (HAX) of bases metals and molten metals. Particu...

BS EN ISO 636: 2008 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification

  • формат pdf
  • размер 615.57 КБ
  • добавлен 01 декабря 2011 г.
The text of ISO 636:2004 has been prepared by Technical Committee ISO/TC 44 Welding and allied processes of the International Organization for Standardization (ISO) and has been taken over as EN ISO 636:2008 by Technical Committee CEN/TC 121 Welding the secretariat of which is held by DIN. This European Standard was approved by CEN (EUROPEAN COMMITTEE FOR STANDARDIZATION) on 5 April 2008 This International Standard specifies requirements for clas...

Grong O. Metallurgical Modelling of Welding

  • формат pdf, gif
  • размер 23.53 МБ
  • добавлен 15 января 2012 г.
The Institute of Materials, 1997, ISBN-10: 1861250363, 593 pages Welding metallurgy is concerned with the application of well-known metallurgical principles for assessment of chemical and physical reactions occurring during welding. On purely practical grounds it is nevertheless convenient to consider welding metallurgy as a profession of its own because of the characteristic non-isothermal nature of the process. In welding the reactions are fo...

ISO 14555: 2006 Welding - Arc stud welding of metallic materials (Eng)

  • формат pdf
  • размер 530.94 КБ
  • добавлен 20 декабря 2011 г.
This International standard was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 10, Unification of requirements in the field of metal welding. 2006-10-01. 70p. This International Standard covers arc stud welding of metallic materials subject to static and dynamic loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality requirements, welding procedure...

Mathers G. The welding of aluminium and its alloys(Сварка Алюминия и его сплавов)

  • формат pdf
  • размер 3.66 МБ
  • добавлен 16 января 2011 г.
2002, - 236 p. The book provides a basic understanding of the metallurgical principles involved in how alloys achieve their strength and how welding can affect these properties. I have included sections on parent metal storage and preparation prior to welding and have also described the more frequently encountered processes. There are recommendations on welding parameters that may be used as a starting point for the development of a viable weldin...

Olsen F.O. (Ed.) Hybrid Laser Arc Welding

  • формат pdf
  • размер 6.85 МБ
  • добавлен 28 декабря 2011 г.
Woodhead Publishing Limited and CRC Press, 2009, 323 pages Hybrid laser-arc welding (HLAW) is a combination of laser welding with arc welding that overcomes many of the shortfalls of both processes. This important book gives a comprehensive account of hybrid laser-arc welding technology and applications. The first part of the book reviews the characteristics of the process, including the properties of joints produced by hybrid laser-arc weldin...