3rd Edition. McGraw-Hill, 2003. 880 p ISBN:0072470461.
Robert Norton's Design of Machinery 3/e continues the tradition of
this bestselling book by emphasizing the design aspects of
mechanisms and providing numerous industry examples and
illustrations for readers. Norton provides a solid conceptual
foundation of kinematics and dynamics of machinery, presented in
the context of what a design engineer needs to work with.
The new 3/e has revised and expanded chapter problem set- 231 new
problems have been added. 88 project assignments are also included
to give readers an in-depth look at mechanism design and analysis
procedures in a realistic format. Coverage of compliant mechanisms
and MEMS has been added in Chapter 2; a section entitled "Some
Useful Mechanisms" is now in Chapter 3; treatment of cams in
Chapters 8 has been condensed and modeized. Information on
transmissions and engine dynamics has been enhanced and expanded as
well.
The third edition comes with a bound-in Student Resources CD-ROM,
with Norton's own student-version programs, an extensive group of
Working Model and Visual NASTRAN 4-D simulations and movie clips
(by Sid Wang, North Carolina A&T University), additional
Working Model examples, and a demonstration version of the Working
Model 2-D software (which does not allow for saving or exporting
files). A new Book Website includes additional instructor and
student resources, scripted MATLAB simulations, and a set of
interactive FE Exam questions for machine dynamics and kinematics.
All chapter problem solutions are available, with password
protection, on the site, and separate solutions files in Mathcad
are also given.
Norton R.L. Design of Machinery: An Introduction to the Synthesis and Analysis of Mechanisms and Machines (part. 3)
Смотрите также
Литвин Ф.Л., Шевелева Г.И. и др. Усовершенствованный подход к анализу контакта зубьев в передачах и автоматическому определению первоначальных приближений
Comput. Methods Appl. Mech. Engrg. 194 (2005), pp. 2927-2946 Перевод Акимова В. В. Редактор перевода Лагутин С. А. Аннотация. Предлагается подход к разработке компьютерных программ для моделирования зацепления и контакта поверхностей зубьев при следующих условиях: 1. Заданы базовые наладки станка, использованные при обработке зубчатых колес. 2. Неизвестно положение средней точки контакта активных поверхностей. Вклад авторов охватывает решение...
Ceccarelli M. (ed.) International Symposium on History of Machines and Mechanisms
Springer, 2004. - 406 p. (English) Presents the proceedings of the HMM Symposium on the History of Machines and Mechanisms held at the University of Cassino, Italy, from May 12-15, 2004.
Darbyshire A. Mechanical Engineering: BTEC National Engineering Specialist Units
2nd Edition. Elsevier Science, 2008. 416 p. ISBN:075068657X The second edition of this established textbook fully covers the most popular specialist units of the Mechanical Engineering, Manufacturing Engineering and Operations and Maintenance Engineering pathways of the 2007 BTEC National Engineering syllabus. Units covered: Unit 8 - Engineering Design Unit 10 - Properties and Applications of Engineering Materials Unit 11 - Further Mechanical P...
Kamm L.J. Understanding Electro-Mechanical Engineering: An Introduction to Mechatronics
IEЕE (Institute of Electrical and Electronics Engineers) Prеss, 1996, 382 pages Widely practiced, but rarely taught, the principles of electro-mechanical (mechatronic) devices and systems are of more relevance to electrical engineering than ever before. Electro-mechanical devices such as keyboards, printers, and hard and floppy disk drives are parts of every computer system. Microminiature electro-mechanical devices etched from silicon are now...
Mechanisms and Mechanical Devices Sourcebook, Fourth Edition
Справочник по механизмам и их применению в различных системах. CHAPTER 1 BASICS OF MECHANISMS 1 Introduction 2 Physical Principles 2 Inclined Plane 3 Pulley Systems 3 Screw-Type Jack 4 Levers and Mechanisms 4 Linkages 5 Specialized Mechanisms 9 Gears and Gearing 10 Pulleys and Belts 14 Sprockets and Chains 14 Cam Mechanisms 14 CHAPTER 2 MOTION CONTROL SYSTEMS 21 Motion Control Systems Overview 22 Glossary of Motion Control Terms 28 Mechanical Co...
Norton R.L. Design of Machinery: An Introduction to the Synthesis and Analysis of Mechanisms and Machines (part. 1)
3rd Edition. McGraw-Hill, 2003. 880 p ISBN:0072470461. Robert Norton's Design of Machinery 3/e continues the tradition of this bestselling book by emphasizing the design aspects of mechanisms and providing numerous industry examples and illustrations for readers. Norton provides a solid conceptual foundation of kinematics and dynamics of machinery, presented in the context of what a design engineer needs to work with. The new 3/e has revised a...
Norton R.L. Design of Machinery: An Introduction to the Synthesis and Analysis of Mechanisms and Machines (part. 2)
3rd Edition. McGraw-Hill, 2003. 880 p ISBN:0072470461. Robert Norton's Design of Machinery 3/e continues the tradition of this bestselling book by emphasizing the design aspects of mechanisms and providing numerous industry examples and illustrations for readers. Norton provides a solid conceptual foundation of kinematics and dynamics of machinery, presented in the context of what a design engineer needs to work with. The new 3/e has revised a...