Стандарт Американского Сварочного Общества AWS A 5.1-91 (ENG)

Стандарт
  • формат pdf
  • размер 3.48 МБ
  • добавлен 08 марта 2011 г.
Стандарт на -- Покрытые электроды для дуговой сварки углеродистых сталей

Стандарт Американского Сварочного Общества AWS A 5.18-2005 (ENG)

Стандарт
  • формат pdf
  • размер 327.26 КБ
  • добавлен 08 марта 2011 г.
Здесь имеется стандарт на проволоки (плавящиеся электроды) сплошного сечения для сварки в среде защитных газов

Стандарт Американского Сварочного Общества AWS A 5.2-92/ASME SFA - 5.2 (ENG)

Стандарт
  • формат pdf
  • размер 172.13 КБ
  • добавлен 27 ноября 2011 г.
This specification prescribes requirements for the classification of carbon and low alloy steel rods for oxyfuel gas welding.

Стандарт Американского Сварочного Общества AWS A 5.3-92/A 5.3M-99/ ASME SFA - 5.3 (ENG)

Стандарт
  • формат pdf
  • размер 498.65 КБ
  • добавлен 28 ноября 2011 г.
This specification prescribes requirements for the classification of aluminum and aluminum-alloy electrodes for shielded metal arc welding.

Стандарт Американского Сварочного Общества AWS A 5.4-92/ASME SFA - 5.4 (ENG)

Стандарт
  • формат pdf
  • размер 681.37 КБ
  • добавлен 28 ноября 2011 г.
This specification prescribes requirements for the classification of covered stainless steel electrodes for shielded metal arc welding.

Стандарт Американского Сварочного Общества AWS A 5.5-96/ASME SFA - 5.5 (ENG)

Стандарт
  • формат pdf
  • размер 937.01 КБ
  • добавлен 28 ноября 2011 г.
This specification prescribes requirements for the classification of low-alloy steel electrodes for shielded metal arc welding of carbon and low-alloy steels.

Стандарт Американского Сварочного Общества AWS A 5.6-84R/ASME SFA - 5.6 (ENG)

Стандарт
  • формат pdf
  • размер 515.51 КБ
  • добавлен 28 ноября 2011 г.
This specification prescribes requirements for the classification of covered copper and copper alloy electrodes for shielded metal arc welding.

ANSI-AWS A2.4-2007 Standard Symbols for Welding, Brazing, and Nondestructive Examination

Стандарт
  • формат pdf
  • размер 2.73 МБ
  • добавлен 01 апреля 2011 г.
This standard establishes a method for specifying certain welding, brazing, and nondestructive examination information by means of symbols. Detailed information and examples are provided for the construction and interpretation of these symbols. This system provides a means of specifying welding or brazing operations as well as nondestructive examination, including the examination method, frequency, and extent.

ANSI/AWS A2.4-98 - Standard Symbols for Welding, Brazing, and Nondestructive Examination

  • формат pdf
  • размер 4.84 МБ
  • добавлен 27 декабря 2009 г.
This standard establishes a method of specifying certain welding, brazing, and nondestructive examination information by means of symbols. Detailed information and examplesa re provided for the construction and interpretation of these symbols. This system provides a means of specifying welding or brazing operations and nondestructive examinationa, as well as the examination method, frequency, and extent.

ANSI/AWS A3.0-94 - Standard Welding Terms and Definitions

Стандарт
  • формат pdf
  • размер 5.52 МБ
  • добавлен 17 декабря 2011 г.
Prepared by AWS Committee on Definitions and Symbols Under the Direction of AWS Technical Activities Committee Approved by AWS Board of Directors Approved by American National Standards Institute in May 23,1994 Publisher: American Welding Society (AWS), 550 N.W. LeJeune Road, Miami, Florida 33126. Printed in the United States of America Number of pages: 119 Publication Date: 1994 ISBN: 0-87171-305-5 This standard is a glossary of the technical...

AWS A5.01M/A5.01: 2008 Procurement Guidelines for Consumables-Welding and Allied Processes-Flux and Gas Shielded Electrical Welding Processes / Стандарт американского сварочного общества (ENG)

Стандарт
  • формат pdf
  • размер 251.5 КБ
  • добавлен 03 декабря 2011 г.
Approved by the American National Standards Institute April 4, 2008, 40 p. This standard is a tool for communication between a purchaser and a supplier of welding consumables within quality systems as might, for example, be based upon ISO 9001. This standard, together with an AWS, ISO, or other recognized welding consumable standard, provides a method for preparing those specific details needed for welding consumable procurement which consist o...

AWS A5.10-92/ASME SFA-5.10 Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Eng)

Стандарт
  • формат pdf
  • размер 394.86 КБ
  • добавлен 10 января 2012 г.
This standard American Welding Society (AWS). 1992. 23p. This specification prescribes requirements for the classification of bare aluminum and aluminum alloy welding electrodes and rods for use with the gas metal arc, gas tungsten arc, oxyfuel gas, and plasma arc welding processes.

AWS A5.11/A5.11M-97/ASME SFA-5.11 Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding (Eng)

Стандарт
  • формат pdf
  • размер 2.74 МБ
  • добавлен 10 января 2012 г.
This standard American Welding Society (AWS). 1997. 32p. This specification prescribes requirements for the classification of nickel and nickel-alloy covered electrodes for shielded metal arc welding. It includes those compositions in which the nickel content exceeds that of any other element.

AWS A5.12/A5.12M-98/ASME SFA-5.12 Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting (Eng)

Стандарт
  • формат pdf
  • размер 166.97 КБ
  • добавлен 10 января 2012 г.
This standard American Welding Society (AWS). 1998. 13p. This specification prescribes the requirements for the classification of bare tungsten and tungsten-alloy electrodes for gas tungsten arc welding and cutting and plasma arc welding and cutting.

AWS A5.13-80/ASME SFA-5.13 Specification for Solid Surfacing Welding Rods and Electrodes (Eng)

Стандарт
  • формат pdf
  • размер 272.31 КБ
  • добавлен 10 января 2012 г.
This standard American Welding Society (AWS). 1980. 23p. This specification prescribes requirements for solid bare surfacing welding rods for use with the oxyfuel and gas tungsten arc welding processes. This specification also covers solid bare surfacing electrodes for use with the gas metal arc process and solid covered surfacing electrodes for use with the shielded metal arc welding process.

AWS A5.14/A5.14M-97/ASME SFA-5.14 Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods (Eng)

Стандарт
  • формат pdf
  • размер 458.64 КБ
  • добавлен 10 января 2012 г.
This standard American Welding Society (AWS). 1997. 19p. This specification prescribes requirements for the classification of bare nickel and nickel-alloy welding electrodes, strip electrodes, and welding rods. It includes those compositions where the nickel content exceeds that of any other element.

AWS A5.15-90/ASME SFA-5.14 Specification for Weld8ng Electrodes and Rods for Cast Iron (Eng)

Стандарт
  • формат pdf
  • размер 227.49 КБ
  • добавлен 10 января 2012 г.
This standard American Welding Society (AWS). 1990. 18p. This specification prescribes requirements for the classification of the following: (a) Rods for oxyfuel gas welding; (b) Electrodes for gas metal arc welding; (c) Electrodes for flux cored arc welding; (d) Electrodes for shielded metal arc welding.

AWS A5.16/A5.16M: 2007 Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods (ENG)

Стандарт
  • формат pdf
  • размер 298.14 КБ
  • добавлен 05 декабря 2011 г.
Approved by the American National Standards Institute August 17, 2007, 38p. This specification prescribes requirements for the classification of titanium and titanium-alloy electrodes and rods for gas tungsten arc, gas metal arc, and plasma arc welding.

AWS A5.17/A5.17M-97/SFA-5.17 Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding (Eng)

Стандарт
  • формат pdf
  • размер 2.68 МБ
  • добавлен 11 января 2012 г.
This standard American Welding Society (AWS). 1997. 28p. This specification prescribes requirements for the classification of carbon steel electrodes (both solid and composite) and fluxes for submerged arc welding.

AWS A5.18/A5.18M: 2005 Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding

Стандарт
  • формат pdf
  • размер 403.88 КБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 2005. 44p. This specification prescribes requirements for theиclassification of carbon steel electrodes (solid, compositeиstranded, and composite metal cored) and rods (solid) forиgas metal arc (GMAW), gas tungsten arc (GTAW), and plasma arc (PAW) welding.

AWS A5.20-95/ASME SFA-5.20 Specification for Carbon Steel Electrodes for Flux Cored Arc Welding (Eng)

Стандарт
  • формат pdf
  • размер 1.05 МБ
  • добавлен 11 января 2012 г.
This standard American Welding Society (AWS). 1995. 34p. This specification prescribes requirements for the classification of carbon steel electrodes for flux cored arc welding.

AWS A5.20/A5.20M: 2005 Specification for Carbon Steel Electrodes for Flux Cored Arc Welding

Стандарт
  • формат pdf
  • размер 525.92 КБ
  • добавлен 28 января 2012 г.
This standard American Welding Society (AWS). 2005. 50p. This specification prescribes requirements for the classification of carbon steel electrodes for flux cored arc welding (FCAW) either with or without shielding gas.

AWS A5.21-80/ASME SFA-5.21 Specification for Composite Surfacing Welding Rods and Electrodes (Eng)

Стандарт
  • формат pdf
  • размер 294.64 КБ
  • добавлен 11 января 2012 г.
This standard American Welding Society (AWS). 1980. 20p. This specification prescribes requirements for composite surfacing welding rods and electrodes. The specification covers straight length bare and covered composite welding rods for use with the oxyfuel, gas tungsten arc, and atomic hydrogen welding processes.

AWS A5.22-95/ASME SFA-5.22 Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding (Eng)

Стандарт
  • формат pdf
  • размер 877.63 КБ
  • добавлен 11 января 2012 г.
This standard American Welding Society (AWS). 1995. 40p. This specification prescribes requirements for the classification of stainless steel electrodes for flux cored arc welding and flux cored rods for root pass welding with the gas tungsten arc process.

AWS A5.22/A5.22M: 2010 Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods

Стандарт
  • формат pdf
  • размер 671.94 КБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 2010. 68p. This specification prescribes requirements for the classification of flux cored stainless steel electrodes for flux cored arc welding, flux cored stainless steel rods for root pass welding with the gas tungsten arc process, and metal cored stainless steel electrodes for gas metal arc welding, gas tungsten arc welding, plasma arc welding, submerged arc welding, and any other process to which...

AWS A5.23/A5.23M-97/ASME SFA-5.23 Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding (Eng)

Стандарт
  • формат pdf
  • размер 2.9 МБ
  • добавлен 11 января 2012 г.
This standard American Welding Society (AWS). 1997. 34p. This specification prescribes requirements for the classification of low-alloy steel electrodes (both solid and composite) and fluxes for submerged arc welding.

AWS A5.24-90/ASME SFA-5.24 Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods (Eng)

Стандарт
  • формат pdf
  • размер 135.83 КБ
  • добавлен 11 января 2012 г.
This standard American Welding Society (AWS). 1990. 8p. This specification prescribes requirements for the classification of zirconium and zirconium alloy electrodes and rods for plasma arc, gas metal arc, and gas tungsten arc welding.

AWS A5.25/A5.25M-97/ASME SFA-5.25 Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding (Eng)

Стандарт
  • формат pdf
  • размер 1.76 МБ
  • добавлен 11 января 2012 г.
This standard American Welding Society (AWS). 1997. 23p. This specification prescribes requirements for the classification of electrodes (both solid and composite metal cored) and fluxes for electroslag welding of carbon and low-alloy steels.

AWS A5.26/A5.26M-97/SFA-5.26 Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding (Eng)

Стандарт
  • формат pdf
  • размер 1.72 МБ
  • добавлен 11 января 2012 г.
This standard American Welding Society (AWS). 1997. 24p. This specification prescribes requirements for the classification of carbon and low-alloy steel electrodes for electrogas welding. It covers solid and composite (flux cored and metal cored) electrodes used with external gas shielding, and composite (self-shielded flux cored) electrodes used without external shielding

AWS A5.28-96/SFA-5.28 Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding (Eng)

Стандарт
  • формат pdf
  • размер 639.96 КБ
  • добавлен 11 января 2012 г.
This standard American Welding Society (AWS). 1996. 32p. This specification prescribes requirements for the classification of low alloy steel electrodes (solid, composite stranded, and composite metal cored) and rods (solid) for gas metal arc welding (GMAW), gas tungsten arc welding (GTAW), and plasma arc welding (PAW).

AWS A5.29-98/SFA-5.29 Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding (Eng)

Стандарт
  • формат pdf
  • размер 2.47 МБ
  • добавлен 11 января 2012 г.
This standard American Welding Society (AWS). 1998. 36p. This specification prescribes requirements for the classification of low-alloy steel electrodes for flux cored arc welding (FCAW).

AWS A5.30-79R/SFA-5.30 Specification for Consumable Inserts (Eng)

Стандарт
  • формат pdf
  • размер 265.93 КБ
  • добавлен 11 января 2012 г.
This standard American Welding Society (AWS). 1979. 12p. This specification prescribes requirements for classification of consumable inserts.

AWS A5.31-92/SFA-5.31 Specification for Fluxes for Brazing and Braze Welding (Eng)

Стандарт
  • формат pdf
  • размер 139.47 КБ
  • добавлен 11 января 2012 г.
This standard American Welding Society (AWS). 1992. 10p. This specification prescribes requirements for the classification of brazing fluxes used with brazing or braze welding filler metals such as those classified in AWS A5.8.

AWS A5.7-84R. / ASME SFA-5.7 Specification for copper and copper alloy bare welding rods and electrodes. (Eng)

Стандарт
  • формат pdf
  • размер 183.1 КБ
  • добавлен 08 января 2012 г.
This standard American Welding Society (AWS). 1984. 10p. This specification prescribes requirements for the classification of copper and copper alloy bare welding rods and electrodes for plasma arc, gas metal arc, and gas tungsten arc welding

AWS A5.8-92 / ASME SFA-5.8 Specification for filler metals for brazing and braze welding. (Eng)

Стандарт
  • формат pdf
  • размер 238.63 КБ
  • добавлен 08 января 2012 г.
This standard American Welding Society (AWS). 1992. 24p. This specification prescribes requirements for the classification of filler metals for brazing and braze welding. It includes filler metals for brazing with or without a flux, and in all protective atmospheres, for various applications, including those for vacuum service.

AWS A5.9-93 / ASME SFA-5.9 Specification forbare stainless steel welding electrodes and rods. (Eng)

Стандарт
  • формат pdf
  • размер 447.16 КБ
  • добавлен 08 января 2012 г.
This standard American Welding Society (AWS). 1993. 25p. This specification prescribes requirements for the classification of bare stainless steel wire, strip, composite metal cored, and stranded welding electrodes and rods.The chromium content of these filler metals is not less than 10.5 percent and the iron content exceeds that of any other element.

AWS B2.1/B2.1M-BMG: 2009 Base Metal Grouping for Welding Procedure and Performance Qualification (ENG)

Стандарт
  • формат pdf
  • размер 617.27 КБ
  • добавлен 05 декабря 2011 г.
Approved by the AWS Board of Directors 2009, 202p. This publication is an extract of AWS B2.1, Specification for Welding Procedure and Performance Qualification, and is identical to Annex D, Base Metal Grouping, in the 2009 edition of that standard. This publication supersedes AWS B2.1-BMG:2005.

AWS B4.0: 2007 Standard Methods for Mechanical Testing of Welds

Стандарт
  • формат pdf
  • размер 3.09 МБ
  • добавлен 09 декабря 2011 г.
154 стр. An American National Standard Approved by the American National Standards Institute May 2, 2007 7th Edition This specification establishes standard methods for mechanical testing of welds. The significance of each test, test apparatus, preparation of the test specimens, and the test procedure are described. Example test results sheets are provided. It is beyond the scope of this document to define the required mechanical properties or ac...

AWS B5.14: 2009 Specification for the Qualification of Welding Sales Representatives (Eng)

Стандарт
  • формат pdf
  • размер 127.98 КБ
  • добавлен 12 января 2012 г.
This standard American Welding Society (AWS). 2009. 18p. This standard defines the minimum education, experience, and knowledge necessary for individuals to function effectively sales representatives in the welding industry.

AWS B5.15: 2010 Specification for the Qualification of Radiographic Interpreters (Eng)

Стандарт
  • формат pdf
  • размер 129.33 КБ
  • добавлен 12 января 2012 г.
This standard American Welding Society (AWS). 2010. 24p. This specification establishes the requirements for qualification of radiographic interpreters. It describes how these personnel shall be qualified, establishes training requirements, defines experience requirements, and establishes areas and levels of knowledge required to perform the functions related to radiographic interpretation.

AWS B5.16: 2006 Specification for the Qualification of Welding Engineers (Eng)

Стандарт
  • формат pdf
  • размер 182.4 КБ
  • добавлен 12 января 2012 г.
This standard American Welding Society (AWS). 2006. 22p. This specification establishes qualification requirements for Welding Engineers. It describes how qualifications are determined, and the practice by which qualification may be attained and maintained.

AWS B5.17-2008 Specification for the Qualification of Welding Fabricators

Стандарт
  • формат pdf
  • размер 171.63 КБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 2008. 22p. This specification establishes the minimum requirements for the Welding Quality Program for Welding Fabricators. This specification is intended to be used by welding fabricators regardless of the welding processes or materials used.

AWS B5.17: 2004 Specification for the Qualification of Welding Fabricators (Eng)

Стандарт
  • формат pdf
  • размер 236.15 КБ
  • добавлен 12 января 2012 г.
This standard American Welding Society (AWS). 2004. 18p. This specification establishes the minimum requirements for the Welding Quality Program for Welding Fabricators (WF). This specification is intended to be used by companies regardless of the welding processes or materials used.

AWS B5.1: 2003 Specification for the Qualification of Welding Inspectors (Eng)

Стандарт
  • формат pdf
  • размер 211.58 КБ
  • добавлен 12 января 2012 г.
This standard American Welding Society (AWS).2003. 22p. This standard establishes the requirements for qualification and defines the body of knowledge for welding inspection personnel.

AWS B5.4: 2005 Specification for the Qualification of Welder Test Facilities (Eng)

Стандарт
  • формат pdf
  • размер 191.87 КБ
  • добавлен 12 января 2012 г.
This standard American Welding Society (AWS). 2005. 24p. This specification defines minimum requirements to enable welder qualification test facilities to consistently conduct welder qualification testing to meet the requirements of codes and other standards.

AWS B5.5: 2011 Specification for the qualification of welding educators (Eng)

Стандарт
  • формат pdf
  • размер 489.76 КБ
  • добавлен 12 января 2012 г.
This standard American Welding Society (AWS). 2011. 22p. This specification establishes the attributes required for determining the qualification of welding educators.

AWS B5.9: 2006 Specification for the Qualification of Welding Supervisors (Eng)

Стандарт
  • формат pdf
  • размер 165.01 КБ
  • добавлен 12 января 2012 г.
This standard American Welding Society (AWS). 2006. 20p. This standard establishes requirements for the qualification of Welding Supervisors. It describes how personnel are qualified, the principles of conduct, and the practice by which qualification may be maintained.

AWS D1.1/D1.1M: 2010 Structural Welding Code - Steel

Стандарт
  • формат pdf
  • размер 19.75 МБ
  • добавлен 09 декабря 2011 г.
569 стр. An American National Standard Approved by the American National Standards Institute March 11, 2010 22nd Edition This code contains the requirements Tor fabricating and erecting welded steel structures. When this code is stipulated in contract documents, conformance with all provisions of the code shall be required, except for those provisions that the Engineer (see 1.4.1) or contract documents specifically modifies or exempts. The follow...

AWS D1.1/D1.M1: 2004. An American National Standart. Struckture Welding Code-Steel

Стандарт
  • формат pdf
  • размер 30,72 МБ
  • добавлен 14 октября 2012 г.
AWS D1.1/D1.1M:2004. Американский национальный стандарт. Стандарт на сварные строительные конструкции из стали. - ANSI:AWS, 2004. - 499 с. В данном Стандарте описаны требования к выполнению сварных соединений строительных металлоконструкций из малоуглеродистых и низколегированных сталей. В разделах с 1 по 8 описаны нормы и правила по выполнению сварных швов в стальных конструкциях. К Стандарту прилагаются 12 обязательных и 14 рекомендуемых Прило...

AWS D16.4M/D16.4: 2005 Specification for the Qualification of Robotic Arc Welding Personnel

Стандарт
  • формат pdf
  • размер 237.09 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2005. 24p. This standard provides specifications for the qualification of robotic arc welding personnel. This standard does not prevent a manufacturer, fabricator, or contractor from continuing to qualify robotic welding personnel according to other standards.

AWS D17.3/D17.3M: 200X Draft. Specification for Friction Stir Welding of Aluminum Alloys for Aerospace Hardware

Стандарт
  • формат pdf
  • размер 1.3 МБ
  • добавлен 28 января 2012 г.
This standard American Welding Society (AWS). Draft. 60p. This specification contains the requirements for designing, friction stir welding, and inspecting aluminum, aerospace hardware. Friction stir welding (FSW) produces a weld between two butting workpieces by the friction heating and plastic material displacement caused by a rotating tool that traverses along the weld joint. This is a working document under consideration by an AWS Committee....

AWS D9.1M/D9.1: 2006 Sheet Metal Welding Code (Eng)

Стандарт
  • формат pdf
  • размер 702.19 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2006. 72p. This code provides qualification, workmanship, and inspection requirements for both arc welding (Part A) and braze welding (Part B), as they apply to the fabrication, manufacture, and erection of nonstructural sheet metal components and systems.

AWS QC13: 2006 Specification for the Certification of Welding Supervisors

Стандарт
  • формат pdf
  • размер 133.24 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2006. 18p. This standard establishes the requirements for certification and maintenance of certification in accordance with qualification requirements stated in AWS B5.9:2006, Specification for the Qualification of Welding Supervisors.

AWS QC14: 2009 Specification for the Certification of Welding Sales Representatives

Стандарт
  • формат pdf
  • размер 98.84 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2009. 18p. This specification establishes the requirements for certification and maintenance of certification in accordance with qualification requirements stated in AWS B5.14, Specification for the Qualification of Welding Sales Representatives.

AWS QC15: 2008 Specification for the Certification of Radiographic Interpreters

Стандарт
  • формат pdf
  • размер 147.97 КБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 2008. 20p. This specification establishes the requirements and procedures for the certification of radiographic interpreters by the American Welding Society (AWS). It describes how personnel are certified, and outlines the principles of conduct and practices by which certification may be maintained.

AWS QC17: 2008 Specification for AWS Accreditation of Certified Welding Fabricators

Стандарт
  • формат pdf
  • размер 126.52 КБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 2008. 18p. This specification establishes the procedure by which a welding fabricator may seek, obtain, and maintain accreditation from AWS to participate in the AWS Certified Welding Fabricator Program.

AWS QC19: 2002 Specification for AWS Certification of Robotic Arc Welding Personnel

Стандарт
  • формат pdf
  • размер 2.94 МБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2002. 24p. This standard establishes the requirements for AWS certification of robotic arc welding operators and technicians. It describes how personnel are certified, and the principles of conduct and practice by which certification may be maintained.

AWS QC1: 2007 Standard for AWS Certification of Welding Inspectors

Стандарт
  • формат pdf
  • размер 171.2 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2007. 24p. This standard establishes the requirements for AWS certification of welding inspection personnel. It describes how personnel are certified, and the principles of conduct and practice by which certification may be maintained

AWS QC4-89 Standard for Accreditation of Test Facilities for AWS Certified Welder Program

Стандарт
  • формат pdf
  • размер 668.56 КБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 1989. 14p. This Standard establishes minimum requirements for Test Facilities, their personnel, and equipment to qualify for accreditation to test and qualify welders in the AWS Certified Welder Program.

AWS QC5-91 AWS Standard for Certification of Welding Educators

Стандарт
  • формат pdf
  • размер 560.42 КБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 1991. 12p. This Standard establishes minimum requirements for Test Facilities, their personnel, and equipment to qualify for accreditation to test and qualify welders in the AWS Certified Welder Program.

AWS QC7-93 Standard for AWS Certified Welders

Стандарт
  • формат pdf
  • размер 518.59 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 1993. 12p. The rules for the American Welding Society (AWS) Certified Welder Program and the requirements for maintenance of certification are provided in this standard.

AWS QC7-93 Supplement C - Welder Performance Qualification Sheet Metal Test Requirements

Стандарт
  • формат pdf
  • размер 1.21 МБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 1993. 40p. This Supplement C to AWS QC7- 93. Standard for AWS Certified Welders, specifies requirements intended to provide an alternative welders certification method.

AWS QC7-93 Supplement F - Chemical Plant and Petroluem Refinery Piping

Стандарт
  • формат pdf
  • размер 755.34 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 1993. 24p. Supplement F of AWS QC7-93, Standard for AWS Certified Welders, was developed using as references ANSI/ASME B31.3, Chemical Plant and Petroleum Refinery Piping and ASME Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualifications. American Welding Society makes no assessment of WPS or PQR compliance with either of these standards nor of their usability in production weldi...

AWS QC7-93 Supplement G - AWs Performance Qualification Test

Стандарт
  • формат pdf
  • размер 492.32 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 1993. 12p. This Supplement to the AWS QC7-93, Standard for AWS Certified Welders, provides a welder certification method not specifically based on a code but which may be acceptable for various codes.

AWS SENSE QC10: 2006 Specification for Qualification and Certification of Level I-Entry Welder

Стандарт
  • формат pdf
  • размер 2.04 МБ
  • добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 2006. 35p. This standard establishes the minimum requirements for qualification and certification as a SENSE Level I-Entry Welder with the American Welding Society.

AWS TSD 1.1: 2011 Specification for the Preparation of American Welding Society Standards

Стандарт
  • формат pdf
  • размер 560.33 КБ
  • добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 2011. 81p. This specification establishes the requirements for all American Welding Society (AWS ) standards for the purpose of achieving uniformity of structure, terminology, and style in individual documents and between associated documents.

AWS-Welding Inspection Handbook

  • формат pdf
  • размер 9.52 МБ
  • добавлен 31 декабря 2009 г.
AWS-Welding Inspection Handbook,Third Edition,2000. Prepared by AWS Committee on Methods of Inspection. THE WELDING INSPECTION HANDBOOK is a collective effort of many volunteer technical specialists to provide information to assist welding inspectors and supervisors in the technology and application of visual and nondestructive examination.

AWS-Welding Journal. December 2009

  • формат pdf
  • размер 9.58 МБ
  • добавлен 02 января 2010 г.
Each month the WELDING JOURNAL delivers news of the welding and metal fabricating industry. Stay informed on the latest products, trends, technology and events via in-depth articles, full-color photos and illustrations, and timely, cost-saving advice. Also featured are articles and supplements on related activities, such as testing and inspection, maintenance and repair, design, training, personal safety and brazing and soldering.