This standard American Welding Society (AWS). 1993. 24p. Supplement
F of AWS QC7-93, Standard for AWS Certified Welders, was developed
using as references ANSI/ASME B31.3, Chemical Plant and Petroleum
Refinery Piping and ASME Boiler and Pressure Vessel Code, Section
IX, Welding and Brazing Qualifications. American Welding Society
makes no assessment of WPS or PQR compliance with either of these
standards nor of their usability in production welding.
AWS QC7-93 Supplement F - Chemical Plant and Petroluem Refinery Piping
Стандарт
- формат pdf
- размер 755.34 КБ
- добавлен 27 января 2012 г.
Смотрите также
API RP 14E-1991 Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems
Стандарт- формат pdf
- размер 3.97 МБ
- добавлен 03 февраля 2012 г.
American Petroleum Instltute (API) Fifth Edition, October. 1991. Reaffirmed June 2000. 62p. This document recommends minimum requirements and guidelines for the design and installation of new piping systems on production platforms located offshore
API RP 2A-WSD-2002 Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design
Стандарт- формат pdf
- размер 2 МБ
- добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Twenty-First Edition, December 2000, Errata and Supplement 1, December 2002. 242p. This publication serves as a guide for those who are concerned with the design and construction of new platforms and for the relocation of existing platforms used for the drilling, development, and storage of hydrocarbons in offshore areas
API RP 555-2001 Process Analyzers
Стандарт- формат pdf
- размер 3.55 МБ
- добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Second Edition, November 2001. 246p. Process monitors that measure and transmit information about chemical composition, physical properties, or chemical properties are known as process analyzer systems. Many of these systems were first developed for laboratory analysis. Today they are primarily used as continuous on-line analyzers.
API RP 578. Material Verification Program for New and Existing Alloy Piping Systems
Стандарт- формат pdf
- размер 216.3 КБ
- добавлен 26 января 2012 г.
The purpose of this recommended practice is to provide the guidelines for a material and quality assurance system to verify that the nominal composition of alloy components within the pressure envelope of a piping system is consistent with the selected or specified construction materials to minimize the potential for catastrophic release of toxic or hazardous liquids or vapors.
API RP 581-2008 Risk-Based Inspection Technology
Стандарт- формат pdf
- размер 5.98 МБ
- добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Second Edition, September 2008. 654p. This publication provides quantitative procedures to establish an inspection program using risk-based methods for pressurized fixed equipment, including pressure vessel, piping, tankage, pressure relief devices, and heat exchanger tube bundles. This document is to be used in conjunction with API 580, which provides guidance on developing a riskbased inspection program for fi...
API Std 614-1999 Lubrication, Shaft-Sealing, and Control-Oil Systems and Auxiliaries for Petroleum, Chemical and Gas Industry Services
Стандарт- формат pdf
- размер 926.67 КБ
- добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Fourth Edition, April 1999. 240p. This international standard covers the minimum requirements for lubrication systems, oil-type shaft-sealing systems, dry gas face-type shaft-sealing systems, and controloil systems for general or special purpose applications
ASTM A751 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
Стандарт- формат pdf
- размер 28.64 КБ
- добавлен 26 января 2012 г.
Американский стандарт определяет нормированные методы химического анализа стальной продукции (обычные углеродистые и нержавеющие марки сталей и сплавы на их основе), определяет методологию, ссылочные материалы и технику проведения анализов. This standard covers definitions, reference methods, practices, and guides relating to the chemical analysis of steel, stainless steel, and related alloys. It includes both wet chemical and instrumental tech...
AWS QC7-93 Supplement C - Welder Performance Qualification Sheet Metal Test Requirements
Стандарт- формат pdf
- размер 1.21 МБ
- добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 1993. 40p. This Supplement C to AWS QC7- 93. Standard for AWS Certified Welders, specifies requirements intended to provide an alternative welders certification method.
AWS QC7-93 Supplement G - AWs Performance Qualification Test
Стандарт- формат pdf
- размер 492.32 КБ
- добавлен 27 января 2012 г.
This standard American Welding Society (AWS). 1993. 12p. This Supplement to the AWS QC7-93, Standard for AWS Certified Welders, provides a welder certification method not specifically based on a code but which may be acceptable for various codes.