ANSI/AISC 360-05 Specification for Structural Steel Buildings

ANSI/AISC 360-05 Specification for Structural Steel Buildings
  • разное
  • pdf
  • 7.63 МБ
  • добавлен 02.02.2012
American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 519p. This Specification has been based upon past successful usage, advances in the state of knowledge, and changes in design practice. The 2005 American Institute of Steel Construction’s Specification for Structural Steel Buildings for the first time provides an integrated treatment of Allowable Stress Design (ASD) and Load and Resistance Factor Design (LRFD), and thus combines and replaces earlier Specifications that treated the two design methods separately. As indicated in Chapter B of the Specification, designs can be made according to either ASD or LRFD provisions.

Смотрите также


ANSI/AISC 358-05 Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications

ANSI/AISC 358-05 Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications

  • разное
  • pdf
  • 1.12 МБ
  • добавлен 02.02.2012
American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 90p. This Standard specifies design, detailing, fabrication and quality criteria for connections that are prequalified in accordance with the AISC Seismic Provisions for Structural Steel Buildings (herein referred to as the AISC Seismic Provisions) for use...
AISC 303-05 Code of Standard Practice for Steel Buildings and Bridges

AISC 303-05 Code of Standard Practice for Steel Buildings and Bridges

  • разное
  • pdf
  • 591.7 КБ
  • добавлен 02.02.2012
American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 80p. In the absence of specific instructions to the contrary in the Contract Documents, the trade practices that are defined in this Code shall govern the fabrication and erection of Structural Steel.
API Spec 2B-2002 Specification for the Fabrication of Structural Steel Pipe

API Spec 2B-2002 Specification for the Fabrication of Structural Steel Pipe

  • разное
  • pdf
  • 128.63 КБ
  • добавлен 02.02.2012
American Petroleum Institute (API) Fifth Edition, January 2002. 19p. This specification covers the fabrication of structural steel pipe formed from plate steel with longitudinal and circumferential butt-welded seams, typically in sizes 14 in. outside diameter (OD) and larger (40 in. and larger for LWDS) with wall thickness 3/8 i...
AWS A5.22/A5.22M: 2010 Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods

AWS A5.22/A5.22M: 2010 Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods

  • разное
  • pdf
  • 671.94 КБ
  • добавлен 30.01.2012
This standard American Welding Society (AWS). 2010. 68p. This specification prescribes requirements for the classification of flux cored stainless steel electrodes for flux cored arc welding, flux cored stainless steel rods for root pass welding with the gas tungsten arc process, and metal cored stainless steel electrodes for ga...
AWS A5.20/A5.20M: 2005 Specification for Carbon Steel Electrodes for Flux Cored Arc Welding

AWS A5.20/A5.20M: 2005 Specification for Carbon Steel Electrodes for Flux Cored Arc Welding

  • разное
  • pdf
  • 525.92 КБ
  • добавлен 28.01.2012
This standard American Welding Society (AWS). 2005. 50p. This specification prescribes requirements for the classification of carbon steel electrodes for flux cored arc welding (FCAW) either with or without shielding gas.
AWS A5.18/A5.18M: 2005 Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding

AWS A5.18/A5.18M: 2005 Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding

  • разное
  • pdf
  • 403.88 КБ
  • добавлен 30.01.2012
This standard American Welding Society (AWS). 2005. 44p. This specification prescribes requirements for theиclassification of carbon steel electrodes (solid, compositeиstranded, and composite metal cored) and rods (solid) forиgas metal arc (GMAW), gas tungsten arc (GTAW), and plasma arc (PAW) welding.
AWS B5.17-2008 Specification for the Qualification of Welding Fabricators

AWS B5.17-2008 Specification for the Qualification of Welding Fabricators

  • разное
  • pdf
  • 171.63 КБ
  • добавлен 30.01.2012
This standard American Welding Society (AWS). 2008. 22p. This specification establishes the minimum requirements for the Welding Quality Program for Welding Fabricators. This specification is intended to be used by welding fabricators regardless of the welding processes or materials used.
AWS QC14: 2009 Specification for the Certification of Welding Sales Representatives

AWS QC14: 2009 Specification for the Certification of Welding Sales Representatives

  • разное
  • pdf
  • 98.84 КБ
  • добавлен 27.01.2012
This standard American Welding Society (AWS). 2009. 18p. This specification establishes the requirements for certification and maintenance of certification in accordance with qualification requirements stated in AWS B5.14, Specification for the Qualification of Welding Sales Representatives.
API Spec 5L-2000 Specification for Line Pipe

API Spec 5L-2000 Specification for Line Pipe

  • разное
  • pdf
  • 904.97 КБ
  • добавлен 02.02.2012
American Petroleum Institute (API) Forty-second Edition, July 2000. 168p. The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.
API Spec 5L-2004 Specification for Line Pipe

API Spec 5L-2004 Specification for Line Pipe

  • разное
  • pdf
  • 1.22 МБ
  • добавлен 04.02.2012
American Petroleum Institute (API) Forty-third Edition, March 2004, Effective Date: October 2004. 171p. The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.