• формат pdf
  • размер 5.92 МБ
  • добавлен 27 ноября 2009 г.
Antman Stuart S. Nonlinear Problems оf Elasticity
Springer, 2005, 838 pp. , 2nd. edition.

This second edition is an enlarged, completely updated, and extensively revised version of the authoritative first edition. It is devoted to the detailed study of illuminating specific problems of nonlinear elasticity, directed toward the scientist, engineer, and mathematician who wish to see careful treatments of precisely formulated problems. Special emphasis is placed on the role of nonlinear material response. The mathematical tools from nonlinear analysis are given self-contained presentations where they are needed.

Table of Contents
Preface. - Background. - The Equations of Motion for Extensible Strings. - Elementary Problems for Elastic Strings. - Planar Steady-State Problems for Elastic Rods. - Introduction to Bifurcation Theory and it's Applications to Elasticity. - Global Bifurcation Problems for Strings and Rods. - Variational Methods. - Theory of Rods Deforming in Space. - Spatial Problems for Rods. - Axisymmetric Equilibria of Shells. - Tensors. - 3-Dimensional Continuum. - 3-Dimensional Theory of Nonlinear Elasticity. - Problems in Nonlinear Elasticity. - Large-Strain Plasticity. - General Theories of Rods. - General Theories of Shells. - Dynamical Problems. - Appendix: Topics in Linear Analysis. - Appendix: Local Nonlinear Analysis. - Appendix: Degree Theory and it's Applications. - References. - Index.
Смотрите также

Brodberg K.B. Cracks and fracture

  • формат djvu
  • размер 6.21 МБ
  • добавлен 23 ноября 2009 г.
1999. , 752 pages From Introduction: What is fracture? The simplest answer would be: "the process of breaking" or "the condition of being broken". Actually, both fracture and break can be traced to the same Indo-European root, bhreg (to break). Each term can be either a noun or a verb. Common-day use of the word "fracture" is not well-defined. It may refer to something that is being (or has been) broken apart, or it may indicate the presence...

Bui H.D. Fracture Mechanics. Inverse Problems and Solutions

  • формат pdf
  • размер 19.02 МБ
  • добавлен 01 августа 2011 г.
Springer, 2006. - 375 p. Today, Fracture Mechanics is a well known topic within the scientific community. Applications of Fracture Mechanics can be found in various fields ranging from solid mechanics and structures to materials sciences and computational mechanics. However, most of these results apply only to linear fracture mechanics of two-dimensional and homogeneous isotropic solids. Therefore there are still incompletely solved problems; s...

Fischer-Cripps A.C. Introduction to Contact Mechanics

  • формат pdf
  • размер 8.03 МБ
  • добавлен 27 сентября 2011 г.
2nd edition, Springer Science+Business Media, 2007, 221 pages This book deals with the mechanics of solid bodies in contact, a subject intimately connected with such topics as fracture, hardness, and elasticity. Coverage begins with an introduction to the mechanical properties of materials, general fracture mechanics, and the fracture of brittle solids. It then provides a detailed description of indentation stress fields for both elastic and el...

Hutchinson J.W. Nonlinear Fracture Mechanics

  • формат pdf
  • размер 1.74 МБ
  • добавлен 26 марта 2011 г.
1979, 101 P. The notes contained within were prepared in conjunction with a set of lectures delivered during the fall of 1978 at The Solid Mechanics Department of the Technical University of Denmark under the auspices of the Danish Center for Applied Mathematics and Mechanics. Starting more or less from scratch in the subject, but assuming at least a limited knowledge of plasticity. I have tried to bring the reader right up to some of the topics...

Hutchinson J.W., Wu T.Y. Advances in Applied Mechanics

  • формат pdf
  • размер 19.44 МБ
  • добавлен 24 декабря 2011 г.
Монография, New York, Academic Press, 1983, 454 стр., V. 23. Micromechanics of Crystals and Polycrystals. Mechanisms of Deformation and Fracture. Recent Developments Concerning Saint-Venant’s Principle. Nonlinear Elastic Shell Theory. Elastic Surface Waves with Transverse Horizontal Polarization.

Muhlstein Christofer L. (editor), Brown Stuart B. (editor) Mechanical Properties of Structural Films

  • формат pdf
  • размер 7.19 МБ
  • добавлен 04 декабря 2011 г.
333 стр., 2001 г. ASTM Special Technical Publication (STP) 1413 100 Barr Harbor Drive PO Box C700 West Conshohocken, PA 19428-2959 Printed in the U.S.A. Library of Congress Cataloging-in-Publication Data ISBN 0-8031-2889-4 TA 418.9.T45 M43 2001 621.3815'2-dc21 Films or layers that are applied to substrates are frequently used for electronic, decorative, barrier, and wear applications. In addition, photolithography used by the microelectronics in...

Timoshenko S.P., Goodier J.N. Theory of elasticity

  • формат djvu
  • размер 4.67 МБ
  • добавлен 04 июня 2011 г.
OCR-слой. Second Edition. – McGraw-Hill book company, Inc. 1951. –506 pp. The many developments and clarifications in the theory of elasticity and its applications which have occurred since the first edition was written are reflected in numerous additions and emendations in the present edition. The arrangement of the book remains the same for the most part. Problems for the student have been added covering the text as far as the end of the chapte...

Timoshenko S.P., Goodier J.N. Theory of elasticity

  • формат pdf
  • размер 18.67 МБ
  • добавлен 25 мая 2011 г.
MacGraw Hill Book Company, 1951. - 506 р. (на англ. языке). Представлена классическая теория упругости. Основные положения о напряженном и деформированном соотоянии, классические задачи. The textbook covers topics of Introduction to Elasticity, Plane Strress and Plane Strain, Two Dimensional Problems Rectangular Coordinates, Two Dimensional Problems in Polar Coordinates, The Photoelastic Method, Strain Energy Methods, Two Dimensional Problems in...

Vasiliev V.V., Morozov E.V. Mechanics and Analysis of Composite Materials

  • формат pdf
  • размер 11.96 МБ
  • добавлен 11 ноября 2010 г.
Elsevier, 2001. - 412 p. This book is concerned with the topical problems of mechanics of advanced composite materials whose mechanical properties are controlled by high-strength and high-stiffness continuous fibers embedded in polymeric, metal, or ceramic matrix. Although the idea of combining two or more components to produce materials with controlled properties has been known and used from time immemorial, modern composites have been develop...

Voyiadjis G.Z., Kattan P. Mechanics of Composite Materials with MATLAB

  • формат pdf
  • размер 1.62 МБ
  • добавлен 13 апреля 2011 г.
Springer, 2005. - 336 Pages. This textbook makes use of the popular computer program MATLAB as the major computer tool to study mechanics of composite materials. It is written specifically for students in engineering and materials science, examining step-by-step solutions of composite material mechanics problems using MATLAB. Each of the 12 chapters is well structured and includes a summary of the basic equations, MATLAB functions used in the ch...