JCGM/WG 2 Document N318 (Eng; French)
Final draft 2006-08-01
In 1997 the Joint Committee for Guides in Metrology (JCGM), chaired
by the Director of the
BIPM, was formed by the seven Inteational Organizations that had
prepared the original
versions of the Guide to the Expression of Uncertainty in
Measurement (GUM) and the
Inteational Vocabulary of Basic and General Terms in Metrology
(VIM). The Joint
Committee took on the work of the ISO Technical Advisory Group 4
(TAG 4), which had
developed the GUM and the VIM. The Joint Committee was originally
made up of
representatives of: the Inteational Bureau of Weights and
Measures (BIPM), the
Inteational Electrotechnical Commission (IEC), the Inteational
Federation of Clinical
Chemistry and Laboratory Medicine (IFCC), the Inteational
Organization for
Standardization (ISO), the Inteational Union of Pure and Applied
Chemistry (IUPAC), the
Inteational Union of Pure and Applied Physics (IUPAP), and the
Inteational Organization
of Legal Metrology (OIML). In 2005, the Inteational Laboratory
Accreditation Cooperation
(ILAC) joined the seven founder inteational organizations.
In 2004, a first draft of this 3rd edition of the VIM was submitted
for comments and proposals
to the eight organizations represented in the JCGM, which in most
cases consulted their
members or affiliates, including numerous National Metrology
Institutes. Responses were
studied and discussed, taken into account when appropriate, and
replied to by JCGM/WG 2.
A final draft of the 3rd edition was submitted in 2006 to the eight
organizations for approval.
International Vocabulary of Metrology - Basic and General Concepts and Associated Terms (VIM) 3rd edition
Похожие разделы
- Академическая и специальная литература
- Геологические науки и горное дело
- Экономика полезных ископаемых
- Сметное дело в ГГО
- Единые нормы выработки, времени, единичные расценки (ЕНВ, НВ, ЕНиР)
- Академическая и специальная литература
- Метрология, стандартизация и сертификация
- Нормативные документы (НД)
- Академическая и специальная литература
- Нефтегазовая промышленность
- Нормативные документы по трубопроводам
- Академическая и специальная литература
- Промышленное и гражданское строительство
- Методические документы в строительстве
- Академическая и специальная литература
- Промышленное и гражданское строительство
- Строительные нормы и правила (СП, СНиП)
Смотрите также
ANSI/API Std 560: 2007 Fired Heaters for General Refinery Service (Eng)
ANSI/API STANDARD 560 FOURTH EDITION, AUGUST 2007,ISO 13705:2006 (Identical), 276p, This International Standard specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing, preparation for shipment, and erection of fired heaters, air preheaters, fans and burners for general refinery service.
ANSI/API Std 610 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries
220 стр. ELEVENTH EDITION, SEPTEMBER 2010 ERRATA, JULY 2011 ISO 13709:2009 (Identical), Centrifugal pumps for petroleum, petrochemical and natural gas industries This International Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This International Standard is applicable to overhung pumps, between-b...
API RP 5A3: Recommended Practice on Thread Compounds for Casing, Tubing, Line Pipe
48 стр SDO: API: American Petroleum Institute This International Standard is based on API RP 5A3, first edition, June 1996. This International Standard specifies requirements and gives recommendations for the manufacture, testing and selection of thread compounds for use on casing, tubing and line pipe based on the current industry consensus of good engineering practice. It is intended that the words casing and tubing apply to the service applica...
API Spec Q1: 2007 Specification for Quality Programs for the Petroleum and Natural Gas Industry
46 стр. ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-government...
API Specification 6A Specification for Wellhead and Christmas Tree Equipment
415 стр. EFFECTIVE DATE: FEBRUARY 1, 2005 ANSI/API 6A/ISO 10423-2003 This International Standard is based on API Spec 6A, seventeenth edition, February 1996, its errata and supplement, and API Spec 6AV1, first edition, February 1996. The contents of API Spec 14D (upon which ISO 10433 was based) and API Recommended Practice 14H (upon which ISO 10419 was based) have been incorporated in API Spec 6A, seventeenth edition. The International System of...
API Std 610 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries
American Petroleum Institute / 01-Sep-2010 / 220 pages. Edition: 11th. Eleventh Edition (ISO 13709:2009 Identical Adoption). Scope. This International Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This International Standard is applicable to overhung pumps, between-bearings pumps and vertically s...
API Std 610: 2010 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries
220 стр. ANSI/API STANDARD 610 ELEVENTH EDITION, SEPTEMBER 2010 ERRATA, JULY 2011 ISO 13709:2009 (Identical), Centrifugal pumps for petroleum, petrochemical and natural gas industries This International Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This International Standard is applicable to ove...
AWS D1.1/D1.1M: 2010 Structural Welding Code - Steel
569 стр. An American National Standard Approved by the American National Standards Institute March 11, 2010 22nd Edition This code contains the requirements Tor fabricating and erecting welded steel structures. When this code is stipulated in contract documents, conformance with all provisions of the code shall be required, except for those provisions that the Engineer (see 1.4.1) or contract documents specifically modifies or exempts. The follow...
IEC 61557-9:2009. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures -Part 9: Equipment for insulation fault location in IT systems
На английском и французском языках. 50 стр. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 9: Equipment for insulation fault location in IT systems S?curit? ?lectrique dans les r?seaux de distribution basse tension de 1 000 V c.a. et 1 500 V c.c – Dispositifs de contr?le, de mesure ou de surveillance de mesures de protection –...