• формат pdf
  • размер 37.91 МБ
  • добавлен 30 декабря 2011 г.
Weng Y., Dong H., Gan Y. (Eds.) Advanced Steels: The Recent Scenario in Steel Science and Technology
Metallurgical Industry Press, Beijing and Springer-Verlag GmbH Berlin, 2011, 511 pages

This book contains more than 50 articles selected from the proceedings of the Inteational Conference on Advanced Steels (ICAS) held during 9-11, Nov, 2010 in Guilin, China. It covers almost all important aspects of steels from physical metallurgy, steel grades, processing and fabrication, simulation, to properties and applications. The book is intended for researchers and postgraduate students in the field of steels, metallurgy and materials science. Prof. Yuqing Weng is an academician of Chinese Academy of Engineering and the president of The Chinese Society for Metals. Prof. Han Dong is the vice president of Central Iron & Steel Research Institute and the director of National Engineering Research Center of Advanced Steel Technology, China. Prof. Yong Gan is an academician of Chinese Academy of Engineering, the vice president of Chinese Academy of Engineering and the president of Central Iron & Steel Research Institute, China.

The aim of this book is to introduce steel researchers and technologists to the understanding of present status of different kinds of steels and relative technologies. It covers general review on steel industry, physical metallurgy, HSLA steel, automobile steel, specialty steel, processing and fabrications. It is the summary of steels over past decades and also the forecast of advanced steels into the future.
Смотрите также

?alak A., Seleck? M., Danninger H. Machinability of Powder Metallurgy Steels

  • формат pdf
  • размер 6.43 МБ
  • добавлен 03 января 2012 г.
Cambridge International Science Publishing, 2005, 536 pages The machinability of powder metallurgy steels is lower compared with wrought steels of appropriate composition and/or mechanical properties. This is due to a larger number of material and processing variables affecting the final properties of sintered materials. The aim of the book is to present knowledge for an overview of all interacting factors in machining, including those applied...

Abe Fujio, Kern Torsten-Ulf, Viswanathan R. Creep resistant steels

  • формат pdf
  • размер 6.82 МБ
  • добавлен 17 декабря 2011 г.
Published in North America by CRC Press LLC, 6000 Broken Sound Parkway, NW, Suite 300, Boca Raton, FL 33487, USA First published 2008, Woodhead Publishing Limited and CRC Press LLC 678 pages Woodhead Publishing ISBN 978-1-84569-178-3 (book) Woodhead Publishing ISBN 978-1-84569-401-2 (e-book) CRC Press ISBN 978-1-4200-7088-0 CRC Press order number: WP7088 General Introduction The development of creep-resistant steels Specifications for creep-res...

Beswick J.M. Bearing Steel Technology, ASTM STP 1419

  • формат pdf
  • размер 12.13 МБ
  • добавлен 15 января 2012 г.
ASTM International, 2002, 0803128940, 533 pages Astm Special Technical Publication Forty-two peer-reviewed papers provide the latest global information on bearing steel manufacture and service life endurance along with an up-to-date perspective on rolling bearing steel technologies. Papers cover: Bearing Steel Process Developments; Steel Technology and Bearing Component Manufacture; Developments in Bearing Steel quality Assessment and Cor...

Higgins R.A. Engineering Metallurgy: Applied Physical Metallurgy

  • формат pdf
  • размер 28.23 МБ
  • добавлен 04 января 2012 г.
6 Edition, Arnold, Hodder Headline Group, London, 1993, 582 pages An ideal introduction to physical metallurgy, this popular and well-established text offers far more specific information on alloys and steels that comparable general materials books. Placing emphasis very much on applied metallurgy, the author employs a simple, direct style, together with helpful diagrams, to relate theory to commercial alloys and real applications. Some Fundam...

Klar E., Samal P.K. Powder Metallurgy Stainless Steels: Processing, Microstructures, and Properties

  • формат pdf
  • размер 7.48 МБ
  • добавлен 20 января 2012 г.
ASM International, 2007, ISBN: 0871708485, 243 pages Progress in the understanding of corrosion and corrosion resistance properties of sintered stainless steels has lead to new applications that benefit from net shape processing and more efficient material utilization. The text, extensive graphics, and tabular summaries provide a comprehensive reference to obtain good corrosion resistance properties of sintered stainless steels with careful pro...

Mazanec K., Mazancova E. Physical Metallurgy of Thermomechanical Treatment of Structural Steels

  • формат pdf
  • размер 1.7 МБ
  • добавлен 15 января 2012 г.
Cambridge International Science Publishing, 1997, 143 Pages, ISBN: 1898326436 The main feature of TMT is that the plastic deformation of the initial austenitic matrix and the formation of its controlled structural and mechanical state with subsequent heat treatment, phase transformation, are linked. This link makes it possible to utilize the hardening or refining of the grains of the initial austenitic matrix and also utilize the structural mod...

Morales E.V. (Ed.) Alloy Steel - Properties and Use

  • формат pdf
  • размер 30.63 МБ
  • добавлен 28 декабря 2011 г.
InTech, Rijeka, Croatia, 2011, 260 pages The sections in this book are devoted to new approaches and usages of stainless steels, the influence of the environments on the behavior of certain classes of steels, new structural concepts to understand some fatigue processes, new insight on strengthening mechanisms, and toughness in microalloyed steels. The kinetics during tempering in low-alloy steels is also discussed through a new set-up that uses...

Sahai Y., Emi T. Tundish Technology For Clean Steel Production

  • формат pdf
  • размер 23.47 МБ
  • добавлен 30 декабря 2011 г.
World Scientific Publishing Company, 2008, 316 pages Continuous casting of steel has become a widely used process and an important step in steel production. The worldwide share of continuously cast steel has increased significantly in the last 25 years or so. However, concurrent with this increase in production levels are stringent quality requirements that have become crucial in the face of progressively increasing machine throughputs and lar...

Sha W., Guo Z. Maraging Steels: Modelling of Microstructure, Properties and Applications

  • формат pdf
  • размер 16.39 МБ
  • добавлен 24 декабря 2011 г.
Woodhead Publishing Limited, 2009, 203 pages Maraging steels are high-strength steels combined with good toughness. They are used particularly in aerospace and tooling applications. Maraging refers to the ageing of martensite, a hard microstructure commonly found in steels. Maraging steels: modelling of microstructure, properties and applications covers the following topics: Introduction to maraging steels; Microstructure of maraging steels; Me...

Steel Manual

  • формат djvu
  • размер 35.4 МБ
  • добавлен 16 января 2012 г.
Изт-во: Verlag Stahleisen, 2007. - 185 pages. Язык: английский. This richly illustrated book contains a brief description of the modern technology of production of steel, as well as about its application in various industries. The main concern (for those who do not speak English) are the scheme of metallurgical processes and units, as well as photographs. Картинки и фотографии просто супер!