American Petroleum Institute (API) Fifth Edition, January 2002.
19p. This specification covers the fabrication of structural steel
pipe formed from plate steel with longitudinal and circumferential
butt-welded seams, typically in sizes 14 in. outside diameter (OD)
and larger (40 in. and larger for LWDS) with wall thickness 3/8 in.
and greater (up to a nominal 40 ft in length) suitable for use in
construction of welded offshore structures.
API Spec 2B-2002 Specification for the Fabrication of Structural Steel Pipe
Стандарт
- формат pdf
- размер 128.63 КБ
- добавлен 02 февраля 2012 г.
Смотрите также
AISC 303-05 Code of Standard Practice for Steel Buildings and Bridges
Стандарт- формат pdf
- размер 591.7 КБ
- добавлен 02 февраля 2012 г.
American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 80p. In the absence of specific instructions to the contrary in the Contract Documents, the trade practices that are defined in this Code shall govern the fabrication and erection of Structural Steel.
ANSI/AISC 358-05 Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications
Стандарт- формат pdf
- размер 1.12 МБ
- добавлен 02 февраля 2012 г.
American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 90p. This Standard specifies design, detailing, fabrication and quality criteria for connections that are prequalified in accordance with the AISC Seismic Provisions for Structural Steel Buildings (herein referred to as the AISC Seismic Provisions) for use with special moment frames (SMF) and intermediate moment frames (IMF).
ANSI/AISC 360-05 Specification for Structural Steel Buildings
Стандарт- формат pdf
- размер 7.63 МБ
- добавлен 02 февраля 2012 г.
American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 519p. This Specification has been based upon past successful usage, advances in the state of knowledge, and changes in design practice. The 2005 American Institute of Steel Construction’s Specification for Structural Steel Buildings for the first time provides an integrated treatment of Allowable Stress Design (ASD) and Load and Resistance Factor Design (LRFD), and thus com...
API RP 2FPS-2001 Recommended Practice for Planning, Designing, and Constructing Floating Production Systems
- формат pdf
- размер 1.8 МБ
- добавлен 08 февраля 2012 г.
American Petroleum Institute (API) First Edition, March 2002. 99p. This Recommended Practice (RP) provides guidelines for design, fabrication, installation, inspection and operation of Floating Production Systems (FPSs). The basic function of a FPS is to receive hydrocarbons from the wellhead, process the hydrocarbons, and store and/or ofЯoad the product to a shuttle tanker or convey it to a pipeline system
API Spec 16D-2005 Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment
Стандарт- формат pdf
- размер 872.06 КБ
- добавлен 08 февраля 2012 г.
American Petroleum Institute (API) Second Edition, March 2002. Effective Data, January 2005. 110p. These specifications establish design standards for systems, that are used to control blowout preventers (BOPs) and associated valves that control well pressure during drilling operations.
API Spec 5L-2000 Specification for Line Pipe
Стандарт- формат pdf
- размер 904.97 КБ
- добавлен 02 февраля 2012 г.
American Petroleum Institute (API) Forty-second Edition, July 2000. 168p. The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.
API Spec 5L-2004 Specification for Line Pipe
Стандарт- формат pdf
- размер 1.22 МБ
- добавлен 04 февраля 2012 г.
American Petroleum Institute (API) Forty-third Edition, March 2004, Effective Date: October 2004. 171p. The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.
AWS A5.18/A5.18M: 2005 Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
Стандарт- формат pdf
- размер 403.88 КБ
- добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 2005. 44p. This specification prescribes requirements for theиclassification of carbon steel electrodes (solid, compositeиstranded, and composite metal cored) and rods (solid) forиgas metal arc (GMAW), gas tungsten arc (GTAW), and plasma arc (PAW) welding.
AWS A5.20/A5.20M: 2005 Specification for Carbon Steel Electrodes for Flux Cored Arc Welding
Стандарт- формат pdf
- размер 525.92 КБ
- добавлен 28 января 2012 г.
This standard American Welding Society (AWS). 2005. 50p. This specification prescribes requirements for the classification of carbon steel electrodes for flux cored arc welding (FCAW) either with or without shielding gas.
AWS A5.22/A5.22M: 2010 Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods
Стандарт- формат pdf
- размер 671.94 КБ
- добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 2010. 68p. This specification prescribes requirements for the classification of flux cored stainless steel electrodes for flux cored arc welding, flux cored stainless steel rods for root pass welding with the gas tungsten arc process, and metal cored stainless steel electrodes for gas metal arc welding, gas tungsten arc welding, plasma arc welding, submerged arc welding, and any other process to which...