API

API Spec 5L-04 Specification for Line Pipe API Spec 5CT Specification for Casing and Tubing API 6A / ISO 10423 Specification 6A API Spec 6D:2002 Арматура трубопроводная промышленная. Спецификация API API Spec 6FA:1999 Спецификация на испытание арматуры на пожаростойкость API Spec 6FD:1995 Спецификация на испытание обратной арматуры на пожаростойкость API RP 521:1997 Guide for Pressure –Reliving and Depressuring Systems Практические рекоменд...

Американский Нефтяной Институт. Версия девятнадцатая, сентябрь 1999 г. 87стр. Методология производства сварочных работ. Язык рус.

American Petroleum Institute (API) Sixth Edition, August 2001. 58p. This standard is applicable to cleaning stationaru atmospheric and lov-pressure (up to and including 15 psig) aboveground petroleum storage tanks used in all sectors of the petroleum and petrochemical industry, including crude oil and gas production, refineries, petrochemical plants, bulk plants and terminals.

American Petroleum Instltute (API) Fifth Edition, January 2007. 202p. This International Standard is applicable to pressure-relieving and vapour-depressuring systems. Although intended for use primarily in oil refineries, it is also applicable to petrochemical facilities, gas plants, liquefied natural gas (LNG) facilities and oil and gas production facilities.

ANSI/API STANDARD 560 FOURTH EDITION, AUGUST 2007,ISO 13705:2006 (Identical), 276p, This International Standard specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing, preparation for shipment, and erection of fired heaters, air preheaters, fans and burners for general refinery service.

220 стр. ELEVENTH EDITION, SEPTEMBER 2010 ERRATA, JULY 2011 ISO 13709:2009 (Identical), Centrifugal pumps for petroleum, petrochemical and natural gas industries This International Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This International Standard is applicable to overhung pumps, between-b...

API 551 (1993)_Process Measurement Instrumentation.pdf ( 4206 KB) API 552 (1994)_Transmission Systems.pdf (3162 KB) API 553 (1998)_Refinery Control Valves.pdf (413 KB) API 554 (1995)_Process Instrumentation and Control.pdf (5545 KB) API 555 (2001)_Process Analyzers.pdf (3633 KB) API 556 (1997)_Instrumentation and Control Systems.pdf (2423 KB) API 557 (2000)_Guide To Advanced Control Systems.pdf (2867 KB) API 560 (2001)_Fired Heaters f...

American Petroleum Institute (API) Second Edition, November 2002. 36p. This publication focuses on the design, implementation, testing and operation of CPM systems that use an algorithmic approach to detect hydraulic anomalies in pipeline operating parameters.

70 стр. Downstream Segment American Petroleum Institute, Ninth Edition , June 2006 General Application Coverage This inspection code covers the in-service inspection, repair, alteration, and rerating activities for pressure vessels and the pressure- relieving devices protecting these vessels. This inspection code applies to all refining and chemical process vessels that have been placed in service unless specifically excluded per 1.2.2. This incl...

Издание 1. 1993 с дополнением 1995 Язык: Русский Страниц: 60 Формат: PDF Обзор: Стандарт API 570 регламентирует процедуры контроля, ремонта, модернизации и реклассификации металлических трубопроводных систем, подвергавшихся эксплуатации. Стандарт API 570 разработан для нефтеперерабатывающей и нефтехимической отраслей, но мо-жет использоваться, если он практически применим, в отношении любой трубопроводной сис-темы. Он предназначен для организаций...

Издание 4. 2016г Язык: Английский Страниц: 88 Формат: PDF Обзор: Стандарт API 570 регламентирует процедуры контроля, ремонта, модернизации и реклассификации металлических трубопроводных систем, подвергавшихся эксплуатации. Стандарт API 570 разработан для нефтеперерабатывающей и нефтехимической отраслей, но мо-жет использоваться, если он практически применим, в отношении любой трубопроводной сис-темы. Он предназначен для организаций, которые подде...

78 стр. THIRD EDITION, NOVEMBER 2009 The intent of this code is to specify the in-service inspection and condition-monitoring program that is needed to determine the integrity of piping. That program should provide reasonably accurate and timely assessments to determine if any changes in the condition of piping could possibly compromise continued safe operation. It is also the intent of this code that owner-users shall respond to any inspection r...

1128 стр. American Petroleum Institute, The American Society of Mechanical Engineers, JUNE 5, 2007, Second Edition The methods and procedures in this Standard are intended to supplement and augment the requirements in API 510, API 570, API 653, and other post construction codes that reference FFS evaluations such as NB-23. The assessment procedures in this Standard can be used for Fitness-For-Service assessments and/or rerating of equipment desig...

374 стр. American Petroleum Institute, The American Society of Mechanical Engineers, AUGUST 11, 2009 Fitness-For-Service (FFS) assessments in API 579-1/ASME FFS-1 Fitness-For-Service are engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage or that may be operating under specific conditions that could produce a failure. API 579-1/ASME FFS-1 provides guidance...

Стандарт Американского нефтяного института для роторных компрессоров объёмного типа для нефтяной, нефтехимической и газовой промышленности Редакция 3 (1997 год) 60 страниц (из 114) - не хватает половины приложений!

API 650 (American Petroleum Institute) 11-ое издание, июнь 2007. Сварные стальные резервуары для хранения нефтепродуктов. На русском языке. Настоящий стандарт устанавливает требования к материалам, проектированию, изготовлению, сооружению и испытаниям вертикальных, цилиндрических, наземных сварных стальных резервуаров с закрытым и открытым верхом различных габаритов и различной емкости, работающих под внутренним давлением, близким к атмосферному...

30 стр. American Petroleum Institute, Fifth Edition, June 2007 This Recommended Practice (RP) provides guidelines for pressure testing steel pipelines for the transportation of gas, petroleum gas, hazardous liquids, highly volatile liquids or carbon dioxide. The RP provides guidance so that: a. Pipeline operators can select a pressure test suitable for the conditions under which the test will be conducted. This includes, but is not limited to, pi...

24 стр. American Petroleum Institute, First Edition, September 2008 This document addresses four pipeline safety elements for hazardous liquid and natural gas pipelines in both the transportation and distribution sectors: — pipeline control room personnel roles, authorities and responsibilities; — guidelines for shift turnover; — pipeline control room fatigue management; and — pipeline control room management of change (MOC).

American Petroleum Instltute (API) Fifth Edition, October. 1991. Reaffirmed June 2000. 62p. This document recommends minimum requirements and guidelines for the design and installation of new piping systems on production platforms located offshore

American Petroleum Instltute (API) Fourth Edition, June 1999. 104p. This document recommends minimum requirements and guidelines for the design and installation of electrical systems on fixed and floating petroleum facilities located offshore

American Petroleum Instltute (API) First Edition, September 2006. 127p. This document recommends minimum requirements and guidelines for the design and installation of electrical systems on fixed and floating petroleum facilities located offshore when hazardous locations are classified as Zone 0, Zone 1, or Zone 2.

American Petroleum Instltute (API) Third Edition, December 1993. 39p. This RP presents recommendations for minimizing the likelihood of having an accidental fire, and for designing, inspecting, and maintaining fire control systems. It emphasizes the need to train personnel in fire fighting, to conduct routine drills, and to establish methods and procedures for safe evacuation.

122 стр. American Petroleum Institute, First Edition, February 2010 This document provides recommended practices for the design, operation, optimization, and troubleshooting of dual gas-lift wells. Compared to single completions, dual completions have a higher initial cost, have more operating problems, are more difficult and expensive to work over, and often produce less efficiently. Based on experience, most technical gas-lift specialists and o...

An American National Standard. American Petroleum Institute (API).This recommended practice was prepared under the direction of the API Safety and Fire Protection Subcommittee. This third edition of API 2028 Flame Arresters in Piping Systems has been extensively rewritten and updated from the previous edition. Appendices to the document are intended to provide additional supplementary information. This guide was prepared to help provide a basic u...

American Petroleum Institute (API) Fourth Edition, September 1995. 23p. This publication covers the safety aspects to be considered when hot tapping, or when welding without hot tapping on in-service piping or equipment. It is not a substitute for job planning. A detailed, written procedure for hot tapping and welding should be prepared or reviewed before starting each job to ensure that all proper steps are taken.

American Petroleum Instltute (API) Twenty-First Edition, December 2000, Errata and Supplement 1, December 2002. 242p. This publication serves as a guide for those who are concerned with the design and construction of new platforms and for the relocation of existing platforms used for the drilling, development, and storage of hydrocarbons in offshore areas

288 стр. American Petroleum Institute, Errata And Supplement 3, October 2007 This publication serves as a guide for those who are concerned with the design and construction of new platforms and for the relocation of existing platforms used for the drilling, development, and storage of hydrocarbons in offshore areas. In addition, guidelines are provided for the assessment of existing platforms in the event that it becomes necessary to make a deter...

American Petroleum Institute (API) Fifth Edition, June 2003. 54p. This Recommended Practice is intended to serve as a guide to crane owners and operators in developing operating and maintenance practices and procedures for use in the safe operation of pedestal-mounted revolving cranes on fixed or oating offshore platforms, jackup drilling rigs, semisubmersible drilling rigs and other types of mobile offshore drilling units (MODUs).

American Petroleum Institute (API) First Edition, April 2002. 76p. This document provides guidelines and recommended practice for the satisfactory design of offshore structures against fire and blast loading.

American Petroleum Institute (API) First Edition, March 2001. 99p. This Recommended Practice (RP) provides guidelines for design, fabrication, installation, inspection and operation of Floating Production Systems (FPSs).

274 стр. American Petroleum Institute, Third Edition, July 2010 This recommended practice is a guide to the designer in organizing an efficient approach to the design of a tension leg platform (TLP). Emphasis is placed on participation of all engineering disciplines during each stage of planning, development, design, construction, installation, and inspection.

American Petroleum Instltute (API) Seventh Edition, January 2000. 100p. This recommended practice applies to the sizing and selection of pressure relief devices used in refineries and related industries for equipment that has a maximum allowable working pressure of 15 psig [103 kPag] or greater.

American Petroleum Instltute (API) Fifth Edition, August 2003. 42p. This recommended practice covers methods of installation for pressure-relief devices for equipment that has a maximum allowable working pressure (MAWP) of 15 psig (1.03 bar g or 103 kPA) or greater

American Petroleum Instltute (API) First Edition, May 1991. 68p. The procedures for installation of the instruments covered in this recommended practice are based on experience with and evaluation of many installations.

American Petroleum Instltute (API) Second Edition, November 2001. 246p. Process monitors that measure and transmit information about chemical composition, physical properties, or chemical properties are known as process analyzer systems. Many of these systems were first developed for laboratory analysis. Today they are primarily used as continuous on-line analyzers.

63 стр. THIRD EDITION, NOVEMBER 2009 This recommended practice (RP) covers the inspection of pressure vessels. It includes a description of the various types of pressure vessels (including pressure vessels with a design pressure below 15 psig) and the standards for their construction and maintenance. This RP also includes reasons for inspection, causes of deterioration, frequency and methods of inspection, methods of repair, and preparation of re...

150 стр. c Приложениями Annex A (informative) Exchangers Annex B (informative) Towers Annex C (informative) Sample Record Forms THIRD EDITION, NOVEMBER 2009 This recommended practice (RP) covers the inspection of pressure vessels. It includes a description of the various types of pressure vessels (including pressure vessels with a design pressure below 15 psig) and the standards for their construction and maintenance. This RP also includes reason...

The purpose of this recommended practice is to provide the guidelines for a material and quality assurance system to verify that the nominal composition of alloy components within the pressure envelope of a piping system is consistent with the selected or specified construction materials to minimize the potential for catastrophic release of toxic or hazardous liquids or vapors.

American Petroleum Instltute (API) Second Edition, September 2008. 654p. This publication provides quantitative procedures to establish an inspection program using risk-based methods for pressurized fixed equipment, including pressure vessel, piping, tankage, pressure relief devices, and heat exchanger tube bundles. This document is to be used in conjunction with API 580, which provides guidance on developing a riskbased inspection program for fi...

American Petroleum Instltute (API) Second Edition, May 2006. 106p. The purpose of these recommended practices is to provide information that can serve as a voluntary industry guide for safe well control operations. This publication is designed to serve as a direct field aid in well control and as a technical source for teaching well control principles.

48 стр SDO: API: American Petroleum Institute This International Standard is based on API RP 5A3, first edition, June 1996. This International Standard specifies requirements and gives recommendations for the manufacture, testing and selection of thread compounds for use on casing, tubing and line pipe based on the current industry consensus of good engineering practice. It is intended that the words casing and tubing apply to the service applica...

API RP 5B1 1. Рекомендованная практика по контролю резьбы обсадных, насосно-коспрессорных и трубопроводных труб. 5-е издание, 1999 год, русский язык. Настоящая рекомендованая практика представлена в качестве руководящего и учебного средства для инспекторов трубных заводов, независимых инспекторов и пользователей, заинтересованных в совершенствовании навыков контроля резьбы.

Американский нефтяной институт (API). Издание второе, декабрь 2005 г. Перевод на русский язык. 22 стр. Настоящий документ обеспечивает руководящие указания для восстановления толстостенных задвижек изготовленных из углеродистой стали, ферритового сплава, нержавеющей стали и никелевого сплава. Указания, содержащиеся в данном документе применимы к арматуре с фланцами и под приварку встык, литой или штампованной.

American Petroleum Institute (API) Third Edition, January 2007. 46p. The purpose of this recommended practice is to present procedures and practices for achieving effective corrosion control on aboveground storage tank bottoms through the use of cathodic protection. It contains provisions for the application of cathodic protection to existing and new storage tanks. Corrosion control methods based on chemical control of the environment or the use...

American Petroleum Institute (API) First Edition, January 1998. 49p. Recommendations set forth in this publication apply to oil and gas well servicing and workover operations involving hydrogen sulfide.

American Petroleum Instltute (API) First Edition, October 2001, Reaffirmed, March 2007. 36p. The purpose of this document is to recommend practices and procedures for promotion and maintenance of safe working conditions for personnel engaged in onshore oil and gas production, including special services.

American Petroleum Instltute (API) Third Edition, May 2004. 52p. This recommended practice is intended to assist in development of a management program designed to promote safety and environmental protection during the performance of offshore oil and gas and sulphur operations.

Американский институт нефти. 16 издание. Август.1998. С дополнением от ноября 2003. Дата вступления в силу: 1 мая 2004 г. 207 стр. Перевод на русский язык. Данные рекомендации распространяются не только на выбор элементов буровой колонны, но и на контроль угла наклона скважины, выбор буровых жидкостей, скорость бурения, весовых нагрузок и других эксплуатационных параметров.

American Petroleum Institute (API). First Edition. October 2004. 114p. This recommended practice (RP) provides guidance to the API authorized inspector on welding inspection as encountered with fabrication and repair of refinery and chemical plant equipment and piping. Common welding processes, welding procedures, welder qualifications, metallurgical effects from welding, and inspection techniques are described to aid the inspector in fulfilling...

67 стр. American Petroleum Institute, Second Edition, December, 1997 This specification is formulated to provide for the availability of safe and functionally interchangeable drill through equipment utilized for drilling for oil and gas. Technical content provides requirements for performance, design, materials, tests and inspection, welding, marking, handling, storing, and shipping. This specification does not apply to field use or field testing...

American Petroleum Institute (API) Second Edition, March 2002. Effective Data, January 2005. 110p. These specifications establish design standards for systems, that are used to control blowout preventers (BOPs) and associated valves that control well pressure during drilling operations.

63 стр. American Petroleum Institute, First Edition, Januaru, 1993 This specification was formulated to provide for safe and functionally interchangeable surface and eubsea choke and kill systems equipment utilized for drilling oil and gas wells. Other parts of the Choke and ЮН System not specifically addressed in this document shall be in accordance with the applicable sections of this specification. Technical content provides the minimum requir...

American Petroleum Institute (API) Fifth Edition, January 2002. 19p. This specification covers the fabrication of structural steel pipe formed from plate steel with longitudinal and circumferential butt-welded seams, typically in sizes 14 in. outside diameter (OD) and larger (40 in. and larger for LWDS) with wall thickness 3/8 in. and greater (up to a nominal 40 ft in length) suitable for use in construction of welded offshore structures.

API Spec 5CT-2011 Обсадные и насосно-компрессорные трубы. Технические условия Американский нефтяной институт (API). Издание девятое, июль 2011 г. Дата введения: 1 января 2012 г. Перевод на русский язык. 287 стр. Данный стандарт устанавливает технические условия поставки стальных труб (обсадных, насосно-компрессорных и укороченных труб), трубных заготовок для муфт, заготовок для муфт и заготовок для фитингов и устанавливает три уровня требований к...

Specifiication, American petrolium institute, april 30, 2002, p. 48 Стандарт API 5D Бурильные трубы на английском языке. Scope References Definitions Process of manufacture Chemical composition Mechanical properties requireements testing Requirements for demention, weights, lengths, and defects pipe ends pipe inspection marking and coatings minimum facility requiremenst for various categories of manufacturers

Американский нефтяной институт (API). Издание сорок четвертое, 1 ноября 2007 г. Дата введения: 1 октября 2008 г. Перевод на русский язык. 162 стр. Целью настоящих технических условий является создание стандарта на трубы, используемые для транспортировки газа, воды и нефти в нефтегазодобывающей и перерабатывающей промышленности. Настоящий Стандарт устанавливает требования к двум уровням технических характеристик изделия (PSL 1 и PSL2) бесшовных и...

American Petroleum Institute (API) Forty-second Edition, July 2000. 168p. The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.

American Petroleum Institute (API) Forty-third Edition, March 2004, Effective Date: October 2004. 171p. The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.

Американский нефтяной институт (API). Издание сорок третье, март 2004 г. Дата введения: 4 октября 2004 г. Перевод на русский язык. 196 стр. Целью настоящих технических условий является создание стандарта на трубы, используемые для транспортировки газа, воды и нефти в нефтегазодобывающей и перерабатывающей промышленности. Настоящие техусловия распространяются на стальные бесшовные и сварные трубопроводы. Они включают трубы с гладкими, нарезными и...

Американский нефтяной институт (API). Издание сорок четвертое, 1 октября 2007 г. Дата введения: 1 октября 2008 г. Перевод на русский язык выполнен переводческой фирмой «Интерсервис». 162 стр. Целью настоящих технических условий является создание стандарта на трубы, используемые для транспортировки газа, воды и нефти в нефтегазодобывающей и перерабатывающей промышленности. Настоящий Стандарт устанавливает требования к производству бесшовных и сва...

Данный стандарт вступает в силу с даты, опубликованной на обложке, но может использоваться начиная с момента поступления. Стандарты, на которые в нем даются ссылки, могут быть заменены другими международными и национальными стандартами, если будет показано, что они удовлетворяют требованиям стандартов, на которые даются ссылки, или превышают их. Изготовители, использующие другой стандарт вместо стандартов, на которые даются ссылки, отвечают...

Американский институт нефти. 22 издание. Введено 01.06.2002. С поправкой от 01.03.2005. 71 стр. Перевод на русский язык. Этот стандарт определяет требования и дает рекомендации по конструкции, изготовлению, испытанию и документации шаровых кранов, обратных клапанов, задвижек и пробковых кранов для применения в трубопроводных системах, соответствующих требованиям ISO 13623 для отраслей нефтяной и газовой промышленности.

23-е издание. Дата вступления в силу - 1 июля 2008 Формат - PDF. Язык - Русский. Объем - 93 страницы Настоящий Международный стандарт определяет требования и представляет рекоменда- ции к проектированию, производству, проверке и документации шаровых, предохранитель- ных клапанов, шиберных задвижек и крановых клапанов для применения в трубопроводных системах, соответствующих требованиям ИСО 13623 для отраслей промышленности нефти и природного газа...

20 cтр. API SPECIFICATION Q1 SIXTH EDITION, MARCH 1, 1999 EFFECTIVE DATE: SEPTEMBER 1, 1999 API Specification Ql provides requirements for a quality system that may be applied on an international basis to facilitate the consistent and reliable manufacture of products to specifications prepared for the oil and gas industry. Part One of this Standard is aligned with ANSI/ISO/ASQC Q9001- 1994, Quality Systems—Model for Quality Assurance in Design, D...

Восьмое издание. декабрь 2007 г. Принятие системы менеджмента качества должно быть стратегическим решением организации. На проектирование и внедрение системы менеджмента качества организации оказывают влияние различные потребности, специфические цели, выпускаемая продукция, применяемые процессы, а также размер и структура организации. Настоящий международный стандарт не предполагает единообразия структуры систем менеджмента качества или единообр...

46 стр. ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-government...

415 стр. EFFECTIVE DATE: FEBRUARY 1, 2005 ANSI/API 6A/ISO 10423-2003 This International Standard is based on API Spec 6A, seventeenth edition, February 1996, its errata and supplement, and API Spec 6AV1, first edition, February 1996. The contents of API Spec 14D (upon which ISO 10433 was based) and API Recommended Practice 14H (upon which ISO 10419 was based) have been incorporated in API Spec 6A, seventeenth edition. The International System of...

API Standard 1104 Nineteenth edition, September 1999, Errata 1, October 31, 2001, 86p. This standard covers the gas and arc welding of butt, .fillet, and socket welds in carbon and low-alloy steel piping used in the compression, pumping, and transmission of crude petroleum, petroleum products, fuel gases, carbon dioxide, and nitrogen and, where applicable, covers welding on distribution systems.

American Petroleum Institute (API) Fifth Edition, June 2001. 30p. The following definitions are applicable to underground tank lining and inspection as described in this standard.

American Petroleum Instltute (API) Third Edition, January 1982. 18p. This standard covers the normal and emergency venting requirements for aboveground liquid petroleum storage tanks and aboveground and belowground refrigerated storage tanks designed for operation at pressures form 1/2 ounce per square inch vacuum through 15 pounds inch gage.

American Petroleum Instltute (API) Eighth Edition, May 1995. 34p. This standard covers the design, construction, and location of liqueЮed petroleum gas (LPG) installations at marine and pipeline terminals, natural gas processing plants, reЮneries, petrochemical plants, or tank farms.

American Petroleum Instltute (API) Ninth Edition, June 2006. 20p. This inspection code covers the in-service inspection, repair, alteration, and rerating activities for pressure vessels and the pressure-relieving devices protecting these vessels.

148 стр. EIGHTH EDITION, DECEMBER 2008 This standard applies to the sizing and selection of pressure relief devices used in refineries and related industries for equipment that has a maximum allowable working pressure of 15 psig (103 kPag) or greater. The pressure relief devices covered in this standard are intended to protect unfired pressure vessels and related equipment against overpressure from operating and fire contingencies. This standard...

American Petroleum Instltute (API) Fifth Edition, June 1995. 23p. This standard is a purchase speciЮcation for Яanged steel pressure relief valves. Basic requirements are given for direct spring-loaded pressure relief valves and pilot-operated pressure relief valves.

Американский нефтяной институт (API). Издание пятое, июнь 2002 г. Перевод на русский язык. 50 стр. Настоящий стандарт является спецификацией для заказа стальной предохранительной арматуры с фланцами. Основными требованиями, предъяляемыми к пружинным предохранительным клапанам пямого действия и управляемойпредохранительным клапанам непрямого действия, являются следующие: а. Обозначение отверстия и его сечение; б. Условный проход арматуры, параме...

Американский нефтяной институт (API). Издание шестое, сентябрь 2004 г. Перевод на русский язык. 20 стр. Данный стандарт распространяется на конструкцию, материалы, строительные размеры, параметрические ряды давление-температура и на требования по контролю, внешнему осмотру и испытаниям для обратных затворов

Американский нефтяной институт (API). Издание восьмое, май 2004 г. Перевод на русский язык. 15 стр. Настоящий стандарт охватывает вопросы технического осмотра, испытания, дополнительного испытания и требований к гидравлическим испытаниям на герметичность клапанов с упругим седлом, с неметаллическим седлом (т.е. керамическим) и седлом на металлическом контакте следующих типов: запорный (шиберный) клапан, шаровой, клапан-заглушка, шаровая задвижка,...

API STANDARD 600 TENTH EDITION, FEBRUARY 1997, 28p. This standard covers steel gate valves with flanged or butt-welding ends in sizes NPS 1 througn NPS 24. These sizes correspond to nominal pipe sizes in ASME B36.10M.

API Standard 608, 3-е издание, август 2002 на русском языке (сканированная копия). Данный стандарт распространяется на краны шаровые металлические фланцевые, резьбовые и с патрубками под приваркую, используемые как запорная арматура для номинальных размеров трубы от 1/2 до 12 дюймов - для фланцевых, и от 1/2 до 2 дюймов для резьвовых и приварных.

192 стр. API 610 на русском языке Стандарт идентичен ISO 13709:2003 Настоящий международный стандарт разработан на основе стандарта API, 8ое издание, 1995, с намерением, чтобы 9ое издание стандарта API 610 было бы таким же, как и данный международный стандарт.

American Petroleum Institute / 01-Sep-2010 / 220 pages. Edition: 11th. Eleventh Edition (ISO 13709:2009 Identical Adoption). Scope. This International Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This International Standard is applicable to overhung pumps, between-bearings pumps and vertically s...

220 стр. ANSI/API STANDARD 610 ELEVENTH EDITION, SEPTEMBER 2010 ERRATA, JULY 2011 ISO 13709:2009 (Identical), Centrifugal pumps for petroleum, petrochemical and natural gas industries This International Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This International Standard is applicable to ove...

Издание четвертое, апрель 1999 Язык: Русский Страниц: 240 Обзор: Данный международный стандарт включает в себя минимальные требования по смазочным системам, системам уплотнения вала нефтяного типа, системам уплотнения торцевого вала сухого газа, и систем контроля нефти для общего и особого применения. Применения в общих целях ограничиваются системами смазки. Эти системы могут служить в таких видах оборудования, как компрессоры, передачи, насосы и...

American Petroleum Instltute (API) Fourth Edition, April 1999. 240p. This international standard covers the minimum requirements for lubrication systems, oil-type shaft-sealing systems, dry gas face-type shaft-sealing systems, and controloil systems for general or special purpose applications

100 cтр. API STANDARD 616 FOURTH EDITION, AUGUST 1998 This standard covers the minimum requirements for open, simple, and regenerative-cycle combustion gas turbine units for services of mechanical drive, generator drive, or process gas generation. All auxiliary equipment required for operating, starting, and controlling gas turbine units and for turbine protection is either discussed directly in this standard or referred to in this standard throu...

180 стр. API STANDARD 616 FIFTH EDITION, JANUARY 2011 This standard covers the minimum requirements for open, simple, and regenerative-cycle combustion gas turbine units for services of mechanical drive, generator drive, or process gas generation. All auxiliary equipment required for operating, starting, controlling, and protecting gas turbine units are either discussed directly in this standard or referred to in this standard through references...

Стандарт АPI 6 Издание седьмое, Июль 2002 г. (русский перевод)

234 стр. Current status: Active Short description: Covers the minimum requirements for centrifugal compressors used in petroleum, chemical, and gas industry services that handle air or gas, including process gear mounted. Does not apply to fans or blowers that develop less than 34 kPa (5 pounds per square inch) pressure rise above atmospheric pressure; these are covered by API Standard 673. This standard also does not apply to packaged, integrall...

167 стр. API STANDARD 618 FOURTH EDITION, JUNE 1995 This standard covers the minimum requirements for reciprocating compressors and their drivers used in petroleum, chemical, and gas industry services for handling process air or gas with either lubricated or nonlubricated cylinders. Compressors covered by this standard are of mod- erate-to-low speed and in critical services. Also covered are related lubricating systems, controls, instrumentation,...

СТАНДАРТ API 618 ЧЕТВЕРТОЕ ИЗДАНИЕ, ИЮНЬ 1995, (русский перевод)

API STANDARD 618 FIFTH EDITION, DECEMBER 2007 This standard is based on the accumulated knowledge and experience of manufacturers and users of reciprocating compressors. The objective of this publication is to provide a purchase specification to facilitate the procurement and manufacture of reciprocating compressors for use in petroleum, chemical, and gas industry services. The primary purpose of this standard is to establish minimum requirements...

American Petroleum Institute (API) Temth Edition, February 2002. 196p. This standard is based on the accumulated knowledge and experience of purchasers and manufacturers of welded, low-pressure oil storage tanks of various sizes and capacities for internal pressures not more than 15 pounds per square inch gauge. The object of this publication is to provide a purchase specification to facilitate the manufacture and procurement of such storage tank...

Настоящий стандарт распространяется на проектирование и строительство сварных надземных резервуаров-хранилищ низкого давления большой вместимости, выполненных из углеродистой стали (включая плоскодонные резервуары), имеющих одну вертикальную ось вращения. Настоящий стандарт не распространяется на процедуры проектирования резервуаров, имеющих стенки, формы которых не могут быть выполнены цельными посредством вращения подходящего профиля вокруг одн...

American Petroleum Institute (API) Temth Edition, November 1998. Addendum 2, November 2001. 240p. This standard covers material, design, fabrication, erection, and testing requirements for vertical, cylindrical, aboveground, closed- and open-top, welded steel storage tanks in various sizes and capacities for internal pressures approximating atmospheric pressure (internal pressures not exceeding the weight of the roof plates), but a higher interna...

American Petroleum Instltute (API) Fourth Edition, April 2009. 166p. This standard covers steel storage tanks built to API 650 and its predecessor API 12C. It provides minimum requirements for maintaining the integrity of such tanks after they have been placed in service and addresses inspection, repair, alteration, relocation, and reconstruction.

44 стр. FOURTH EDITION, APRIL 2009 ADDENDUM 1, AUGUST 2010 This standard covers steel storage tanks built to API 650 and its predecessor API 12C. It provides minimum requirements for maintaining the integrity of such tanks after they have been placed in service and addresses inspection, repair, alteration, relocation, and reconstruction. The scope is limited to the tank foundation, bottom, shell, structure, roof, attached appurtenances, and nozzl...

Четвертое издание, 2012, 273 стр., на английском языке. API 682 (ISO 21049) описывает системы уплотнения вала для центробежных и роторных насосов. Стандарт представляет собой комплекс организационно-технических мероприятий по разработке и изготовлению уплотнительных систем с торцовыми уплотнениями повышенной надежности и безопасности. Регламентирует типы, компоновки механических уплотнений, и систем обеспечения, материалы, методики испытания,...

142 стр. API Standart 685 - Герметичные бессальниковые центробежные насосы для нефтедобычи при эксплуатации в тяжелом режиме работы в химической и газовой промышленности. First Edition, October 2000 This standard is based on the accumulated knowledge and experience of manufacturers and users of sealless centrifugal pumps. The objective of this publication is to provide a purchase specification to facilitate the manufacture and procurement of seal...

Training course for API 570. Kuwait Petroleum Corporation. Год издания - 2006 Язык - английский Страниц - 431 Формат - pdf Preparatory course for API 570 exam.

Training course for API 653 Год издания - 2005 Язык - английский Страниц - 203 Формат - pdf Preparatory course for API 653 exam. Tank Inspection Code: Inspection, repair, alteration, and reconstruction of steel aboveground storage tanks used in the petrochemical industry. Harvard Technology Middle East