AWS B5.15: 2010 Specification for the Qualification of Radiographic Interpreters (Eng)

Published by the American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016-5990, 2010, 290 pages Английский язык This Section contains rules relating to the qualification of welding and brazing procedures as required by other Code Sections for component manufacture. It also covers rules relating to the qualification and requalification of welders, brazers, and welding and brazing operators in order that they may perform...

Approved by the AWS Board of Directors 2009, 202p. This publication is an extract of AWS B2.1, Specification for Welding Procedure and Performance Qualification, and is identical to Annex D, Base Metal Grouping, in the 2009 edition of that standard. This publication supersedes AWS B2.1-BMG:2005.

This standard American Welding Society (AWS). 2006. 22p. This specification establishes qualification requirements for Welding Engineers. It describes how qualifications are determined, and the practice by which qualification may be attained and maintained.

This standard American Welding Society (AWS). 2004. 18p. This specification establishes the minimum requirements for the Welding Quality Program for Welding Fabricators (WF). This specification is intended to be used by companies regardless of the welding processes or materials used.

This standard American Welding Society (AWS).2003. 22p. This standard establishes the requirements for qualification and defines the body of knowledge for welding inspection personnel.

This standard American Welding Society (AWS). 2005. 24p. This specification defines minimum requirements to enable welder qualification test facilities to consistently conduct welder qualification testing to meet the requirements of codes and other standards.

This standard American Welding Society (AWS). 2011. 22p. This specification establishes the attributes required for determining the qualification of welding educators.

This standard American Welding Society (AWS). 2006. 20p. This standard establishes requirements for the qualification of Welding Supervisors. It describes how personnel are qualified, the principles of conduct, and the practice by which qualification may be maintained.

This European Standard defines the qualification test of welders for the fusion welding of steels. It provides a set of technical rules for a systematic qualification test of the welder, and enables such qualifications to be uniformly accepted independently of the type of product, location and examiner/examining body.

Guideline of the International Institute of Welding. Version 104_08 of June 2010. Doc.104/08/05-2010/IAB WG#A3a. 106p. Minimum requirements for the education, training examination and qualification of international welder.