BS EN 287-1: 2004 Qualification test of welders - Fusion welding - Part 1: Steels

Published by the American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016-5990, 2010, 290 pages Английский язык This Section contains rules relating to the qualification of welding and brazing procedures as required by other Code Sections for component manufacture. It also covers rules relating to the qualification and requalification of welders, brazers, and welding and brazing operators in order that they may perform...

This standard American Welding Society (AWS). 2006. 22p. This specification establishes qualification requirements for Welding Engineers. It describes how qualifications are determined, and the practice by which qualification may be attained and maintained.

This standard American Welding Society (AWS). 2005. 24p. This specification defines minimum requirements to enable welder qualification test facilities to consistently conduct welder qualification testing to meet the requirements of codes and other standards.

This standard American Welding Society (AWS). 2006. 20p. This standard establishes requirements for the qualification of Welding Supervisors. It describes how personnel are qualified, the principles of conduct, and the practice by which qualification may be maintained.

This European Standard was approved by CEN on 6 July 2000 and amendment A1 was approved by CEN on 20 November 2003. 62p. This European Standard gives guidance for manual, semi-mechanized, mechanized and automatic arc welding of ferritic steels (see clause 5), excluding ferritic stainless steels, in all product forms.

This European Standard was approved by CEN on 13 August 2000, and amendment A1 was approved by CEN on 20 November 2003. 32p. This European Standard gives general recommendations for the fusion welding of stainless steels. Specific details relevant to austenitic, austenitic-ferritic, ferritic and martensitic stainless steels are given in annexes A to D.

This European Standard was approved by CEN on 28 February 2003. 14p. This European Standard gives general recommendations for welding of clad steels by means of appropriate arc welding processes and electroslag strip cladding. It is generally applicable to all clad steels and is appropriate regardless of the type of fabrication involved, although the application standard may have additional requirements. Non-ferrous claddings, such as titanium, t...

This European Standard was approved by CEN on 14 October 2004. 44p. This document describes the basic verification tests, the testing methods, the amount of testing and the requirements for the qualification of welding consumables for steel, nickel and nickel alloys intended for all fields of application.

This European Standard was approved by CEN on 14 October 2004. 26p. This document applies to welding consumables for which supplementary qualification is required. It contains the technical requirements to be fulfilled.

This European Standard was approved by CEN on 14 October 2004. 32p. This document describes the basic verification tests, the testing methods, the amount of testing and the requirements for the qualification of wire electrodes, wires and rods for welding of aluminium.