Робототехнические системы (РТС)
Автоматизация
  • формат pdf
  • размер 8.37 МБ
  • добавлен 20 марта 2011 г.
Cetto J.A., Filipe J., Ferrier J-L. (Eds.) Informatics in Control Automation and Robotics
Springer, 2011. 538 p. ISBN: 3642197299

The present book includes a set of selected papers from the fourth Inteational Conference on Informatics in Control Automation and Robotics (ICINCO 2009), held in Milan, Italy, from 2 to 5 July 2009. The conference was organized in three simultaneous tracks: Intelligent Control Systems and Optimization, Robotics and Automation and Systems Modeling, Signal Processing and Control. The book is based on the same structure.
ICINCO received 365 paper submissions, not including those of workshops, from 55 countries, in all continents. After a double blind paper review performed by the Program Committee only 34 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 9%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2009.
Commitment to high quality standards is a major conce of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics.
Похожие разделы
Смотрите также

Bruno Siciliano, Oussama Khatib Springer Handbook of Robotics

Справочник
  • формат pdf
  • размер 85.25 МБ
  • добавлен 07 октября 2010 г.
Contents Part A Robotics Foundations 1 Kinematics 2 Dynamics 3 Mechanisms and Actuation 4 Sensing and Estimation 5 Motion Planning 6 Motion Control 7 Force Control 8 Robotic Systems Architectures and Programming 9 AI Reasoning Methods for Robotics Part B Robot Structures 10 Performance Evaluation and Design Criteria 11 Kinematically Redundant Manipulators 12 Parallel Mechanisms and Robots 13 Robots with Flexible Elements 14 Model Identi?cation 15...

I. Ramos Arreguin (ed.) Automation and Robotics

  • формат pdf
  • размер 32.94 МБ
  • добавлен 14 октября 2011 г.
First published May 2008 Printed in Croatia ISBN 978-3-902613-41-7 396 p. In this book, a set of relevant, updated and selected papers in the field of automation and robotics are presented. These papers describe projects where topics of artificial intelligence, modeling and simulation process, target tracking algorithms, kinematic constraints of the closed loops, non-linear control, are used in advanced and recent research. Also, the lectu...

Jazar R.N. Theory of Applied Robotics: Kinematics, Dynamics, and Control

  • формат pdf
  • размер 20.39 МБ
  • добавлен 11 сентября 2011 г.
Springer, 2007. - 693 pages. Theory of Applied Robotics: Kinematics, Dynamics, and Control is appropriate for courses in robotics that emphasize kinematics, dynamics, and control. The contents of this book are presented at a theoretical-practical level. It explains robotics concepts in detail, concentrating on their practical use. Related theorems and formal proofs are provided, as are real-life applications. Students, researchers, and practic...

Kurfess T.R. Robotics and Automation Handbook

  • формат pdf
  • размер 24.27 МБ
  • добавлен 04 мая 2009 г.
CRC Press, 2004, 486 pages. The Robotics and Automation Handbook addresses the major aspects of designing, fabricating, and enabling robotics systems and their various applications. The chapters cover the development and implementation of specifications for a robotic system and the issues related to the forces and torques generated on a robotic system. The author presents kinetic and dynamic analyses to demonstrate how a robotic system is analyze...

Mathia K. Robotics For Electronics Manufacturing

  • формат pdf
  • размер 2.55 МБ
  • добавлен 29 сентября 2011 г.
Cambridge University Press, 2010. - 238 p. Understand the design, testing, and application of cleanroom robotics and automation with this practical guide. From the history and evolution of cleanroom automation to the latest applications and industry standards, this book provides the only complete overview of the topic available. With over 20 years\' industry experience in robotics design, Karl Mathia provides numerous real-world examples to enab...

Mentz J. Motion Control Theory Needed in the Implementation of Practical Robotic Systems

  • формат pdf
  • размер 983.89 КБ
  • добавлен 29 сентября 2009 г.
Two areas of expertise required in the production of industrial and commercial robotics are motor control and obstacle navigation algorithms. This is especially true in the field of autonomous robotic vehicles, and this application will be the focus of this work. This work is divided into two parts. Part I describes the motor types and feedback devices available and the appropriate choice for a given robotics application. This is followed by a de...

Pecherkov? P., Fl?dr M., Dun?k J.(ed.) Robotics, Automation and Control

  • формат pdf
  • размер 43.42 МБ
  • добавлен 14 октября 2011 г.
First published October 2008 Printed in Croatia ISBN 978-953-7619-18-3 504 p. This book was conceived as a gathering place of new ideas from academia, industry, research and practice in the fields of robotics, automation and control. The aim of the book was to point out interactions among the various fields of interests in spite of diversity and narrow specializations which prevail in the current research. We believe that the resulting colle...

Siciliano B., Sciavicco L., Villani L., Oriolo G. Robotics: Modelling, Planning and Control, Springer, 2009

  • формат pdf
  • размер 9.32 МБ
  • добавлен 04 октября 2010 г.
This is the classic text on robot manipulators, now covers visual control, motion planning and mobile robots too! "Robotics" provides the basic know-how on the foundations of robotics: modelling, planning and control. The text develops around a core of consistent and rigorous formalism with fundamental and technological material giving rise naturally and with gradually increasing difficulty to more advanced considerations. The theory of manipulat...

Siciliano B., Valavanis K.P. Control Problems in Robotics and Automation

  • формат pdf
  • размер 15.09 МБ
  • добавлен 07 мая 2009 г.
Springer (Lecture Notes in Control and Information Sciences, vol. 230), 1998. Focusing on the important control problems in state-of-the-art robotics and automation, this volume features invited papers from a workshop held at CDC, San Diego, California. The many topics covered include: automatic control, distributed multi-agent control, multirobots, dexterous hands, flexible manipulators, walking robots, free-floating systems, nonholonomic robots...

Zivanovic M.D., Vukobratovic M.K. Multi-arm cooperating robots: dynamics and control

  • формат pdf
  • размер 3.97 МБ
  • добавлен 06 мая 2009 г.
Springer (Intelligent Systems, Control and Automation: Science and Engineering), 2006, 288 pages. Several consistent solutions for cooperative system control have recently been identified by the authors of the current monograph. This was achieved by solving three separate tasks that are essential for solving the problem of cooperative manipulation as a whole. The first task is related to the understanding of the physical nature of cooperative man...