Ferry M. Direct Stripcasting of Metals and Alloys: Processing, Microstructure and Properties

Ferry M. Direct Stripcasting of Metals and Alloys: Processing, Microstructure and Properties
  • разное
  • pdf
  • 68.06 МБ
  • добавлен 28.12.2011
Woodhead Publishing and Maney Publishing, 2006, 275 pages

Direct strip casting is a continuous casting process for producing metallic sheet directly from the molten state that minimises the need for substantial secondary processing. This important book is the first to review the implications of strip casting technology for a range of alloys, including carbon and stainless steel, aluminium, magnesium, titanium, copper and other non-ferrous alloys. The book is divided into six chapters, with the first two describing the physical metallurgy of candidate alloys for direct strip casting and the development of microstructure during solidification. Chapter 3 describes the principles of continuous casting processes and the evolution of direct strip casting. It provides the foundation for the following two chapters which describe process variables and their impact on microstructure and strip quality. The final chapter describes possible techniques in secondary processing and fabrication of the as-cast strip. Two appendices discuss simulation and modelling issues, and the measurement and representation of textures in metal strip. Direct strip casting of metals and alloys is a standard reference on a technology destined to have a profound impact on the manufacturing landscape of the twenty-first century.

Смотрите также


Whang S.H. (Ed.) Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications

Whang S.H. (Ed.) Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications

  • разное
  • pdf
  • 27.87 МБ
  • добавлен 28.12.2011
Woodhead Publishing Limited, 2011, 803 pages

Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest tec...
Higgins R.A. Engineering Metallurgy: Applied Physical Metallurgy

Higgins R.A. Engineering Metallurgy: Applied Physical Metallurgy

  • разное
  • pdf
  • 28.23 МБ
  • добавлен 04.01.2012
6 Edition, Arnold, Hodder Headline Group, London, 1993, 582 pages

An ideal introduction to physical metallurgy, this popular and well-established text offers far more specific information on alloys and steels that comparable general materials books. Placing emphasis very much on applied metallurgy, the author employs a...
Brandt D.A., Warner J.C. Metallurgy Fundamentals

Brandt D.A., Warner J.C. Metallurgy Fundamentals

  • разное
  • djvu
  • 6.69 МБ
  • добавлен 15.01.2012
Goodheart-Wilcox, 2005, ISBN 1590703456, 301 pages

Provides instruction and information on the basic principles of metallurgy. Emphasizes the practical aspects of metallurgy. Explores the behavior of metals subjected to metallurgical processes and explains why certain material properties are desired and how these proper...
Sha W., Guo Z. Maraging Steels: Modelling of Microstructure, Properties and Applications

Sha W., Guo Z. Maraging Steels: Modelling of Microstructure, Properties and Applications

  • разное
  • pdf
  • 16.39 МБ
  • добавлен 24.12.2011
Woodhead Publishing Limited, 2009, 203 pages

Maraging steels are high-strength steels combined with good toughness. They are used particularly in aerospace and tooling applications. Maraging refers to the ageing of martensite, a hard microstructure commonly found in steels. Maraging steels: modelling of microstructure,...
?alak A., Seleck? M., Danninger H. Machinability of Powder Metallurgy Steels

?alak A., Seleck? M., Danninger H. Machinability of Powder Metallurgy Steels

  • разное
  • pdf
  • 6.43 МБ
  • добавлен 03.01.2012
Cambridge International Science Publishing, 2005, 536 pages

The machinability of powder metallurgy steels is lower compared with wrought steels of appropriate composition and/or mechanical properties. This is due to a larger number of material and processing variables affecting the final properties of sintered material...
Campbell J. Castings. The New Metallurgy of Cast Metals (2nd ed.) 2003

Campbell J. Castings. The New Metallurgy of Cast Metals (2nd ed.) 2003

  • разное
  • pdf
  • 11.59 МБ
  • добавлен 22.09.2010
This book is the first attempt to codify and present the New Metallurgy. It cannot therefore claim to be authoritative on all aspects at this time. It is an introduction to the new thinking of the metallurgy of cast alloys, and, by virtue of the survival of many of the defects during plastic working, wrought alloys too.
The ...
Klar E., Samal P.K. Powder Metallurgy Stainless Steels: Processing, Microstructures, and Properties

Klar E., Samal P.K. Powder Metallurgy Stainless Steels: Processing, Microstructures, and Properties

  • разное
  • pdf
  • 7.48 МБ
  • добавлен 20.01.2012
ASM International, 2007, ISBN: 0871708485, 243 pages

Progress in the understanding of corrosion and corrosion resistance properties of sintered stainless steels has lead to new applications that benefit from net shape processing and more efficient material utilization. The text, extensive graphics, and tabular summarie...
Habashi F. (ed.) Handbook of Extractive Metallurgy Vol. 1-4

Habashi F. (ed.) Handbook of Extractive Metallurgy Vol. 1-4

  • разное
  • djvu
  • 42.77 МБ
  • добавлен 09.11.2010
Wiley-VCH, –1997. – 2426 p.
A wealth of data on metals and their extraction is revealed in this comprehensive handbook. The aim of this book is to provide a clear description of how a particular metal is extracted industrially from different raw materials, and on what its important compounds are.

The Handbook is the...
Habashi F. (ed.) Handbook of Extractive Metallurgy Vol. 1-4

Habashi F. (ed.) Handbook of Extractive Metallurgy Vol. 1-4

  • разное
  • pdf
  • 46.5 МБ
  • добавлен 09.11.2010
Wiley-VCH, –1997. – 2426 p.
A wealth of data on metals and their extraction is revealed in this comprehensive handbook. The aim of this book is to provide a clear description of how a particular metal is extracted industrially from different raw materials, and on what its important compounds are.

The Handbook is the...
Thompson M. (Ed.). Base Metals Handbook

Thompson M. (Ed.). Base Metals Handbook

  • разное
  • pdf
  • 2.59 МБ
  • добавлен 08.01.2012
Edited by Martin Thompson
Woodhead Publishing Limited, 2006. 464 pp.

The purposes of the Base Metals Handbook is to provide thorough yet compact descriptions of the metals. This includes their histories (which vary in length from a century or so to several millennia), where they are found and how they are extracted,...