Yu W., LaBoube R.A. Cold-Formed Steel Design
Подождите немного. Документ загружается.
REFERENCES 465
Steel Elements, Part. 1, prepared by Working Group TWG
7.2 of ECCS Committee TC7, Feb. 1981.
8.8 European Convention for Constructional Steelwork:
“Mechanical Fasteners for Use in Thin-Walled Structural
Steel Elements,” Preliminary European Recommendations
for Connections in Thin Walled Structural Steel Elements,
Part 2, prepared by Working Group TWG 7.2 of ECCS
Committee TC7, Feb. 1981.
8.9 Heagler, R. B.: “How to Fasten Steel Deck,” Modern Steel
Construction, vol. 22, First Quarter 1982.
8.10 American Iron and Steel Institute: “Production Design
Guide for Adhesive Bonding of Sheet Steel,” AISI 1201-
413-476, Washington, DC.
8.11 American Welding Society: “Symbols for Welding and
Nondestructive Testing,” AWS A2.4, Miami, FL, 1979.
8.12 Pekoz, T. B., and W. McGuire: “Welding of Sheet Steel,”
Report SG 79-2, American Iron and Steel Institute, Wash-
ington, DC, Jan. 1979.
8.13 Pekoz, T. B., and W. McGuire: “Welding of Sheet Steel,”
in Proceedings of the 5th International Specialty Confer-
ence on Cold-Formed Steel Structures,W.W.YuandJ.
H. Senne Eds., University of Missouri-Rolla, Nov. 1980.
8.14 Blodgett, O. W.: “Report on Proposed Standards for Sheet
Steel Structural Welding,” in Proceedings of the 4th Inter-
national Specialty Conference on Cold-Formed Steel Struc-
tures, University of Missouri-Rolla, June 1978.
8.15 American Welding Society: “Specification for Welding
Sheet Steel in Structures,” AWS D1.3-78, Miami, FL,
1978.
8.16 American Welding Society: “Structural Welding
Code—Sheet Steel,” 2nd ed., ANS1/AWS D1.3-89,
Miami, FL, 1989.
8.17 Fung, C.: “Strength of Arc-Spot Weld in Sheet Steel
Construction,” Final Report on CSICC Industry Research
Project 175, Westeel-Rosco, Canada, 1978.
8.18 Albrecht, R. E.: “Developments and Future Needs in
Welding Cold-Formed Steel,” in Proceedings of the 9th
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1988.
8.19 Hsiao, L. E., and W. W. Yu: “Required Factor of Safety
for Tensile Strength of Arc Spot Welds Using Allow-
able Stress Design Methods,” Committee Correspondence,
University of Missouri-Rolla, Mar. 1989.
8.20 LaBoube, R. A., and W. W. Yu: “Tensile Strength of Cold-
Formed Steel Welded Connections,” in Proceedings of the
International Conference on Steel & Aluminium Structures,
Singapore, May 1991.
8.21 American Iron and Steel Institute: “Specifications for the
Design of Cold-Formed Steel Structural Members,” 1968
ed., Addendum 2, Washington, DC, Feb. 4, 1977.
8.22 Stark, J. W. B., and F. Soetens: “Welded Connections in
Cold-Formed Sections,” in Proceedings of the 5th Interna-
tional Specialty Conference on Cold-Formed Steel Struc-
tures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1980.
8.23 Kato, B., and I. Nishiyama: “T-Joints Made of Rectangular
Tubes,” in Proceedings of the 5th International Specialty
Conference on Cold-Formed Steel Structures,W.W.Yu
and J. H. Senne, Eds., University of Missouri-Rolla, Nov.
1980.
8.24 Lind, N. C., L. I. Knab, and W. B. Hall: “Economic Study
of the Connection Safety Factor,” in Proceedings of the 3rd
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1975.
8.25 Wardenier, J.: Hollow Section Joints,DelftUniversity
Press, Delft, 1982.
8.26 Kurobane, Y., Y. Makino, and K. Ochi: “Ultimate Resis-
tance of Unstiffened Tubular Joints,” Journal of the Struc-
tural Engineering, ASCE Proceedings, vol. 110, no. 2, Feb.
1984.
8.27 Kurobane, Y., K. Ogawa, K. Ochi, and Y. Makino: “Local
Buckling of Braces in Tubular K-Joints,” International
Journal on Thin-Walled Structures
, vol. 4, no. 1, 1986.
8.28
M
¨
akel
¨
ainen, P., R.
Puthil, and F. Bijlaard: “Strength, Stiff-
ness and Nonlinear Behaviour of Simple Tubular Joints,”
Preprint of 13th Congress, IABSE , June 6–10, 1988.
8.29 M
¨
akel
¨
ainen, P. K.: “Semi-Analytical Models for the Static
Behaviour of T and DT Tubular Joints,” in Proceedings
of the 3rd Finnish Mechanics Days,M.A.Ranta,Ed.,
Helsinki University of Technology, Finland, 1988.
8.30 Niemi, E., J. Lehtinen, and I. Sorsa: “Behaviour of
Rectangular Hollow Section K-Joints at Low Tempera-
tures,” Report 54, Department of Mechanical Engineering,
Lappeenranta University of Technology, Lappeenranta,
Finland, 1988.
8.31 Niemi, E., and P. Makelainen, Eds.: Tubular Structures,
Elsevier Applied Science, New York, 1990.
8.32 Zhao, X. L., and G. J. Hancock: “Tubular T-Joints Subject
to Combined Actions,” in Proceedings of the 10th Interna-
tional Specialty Conference on Cold-Formed Steel Struc-
tures, W. W. Yu, and R. A. LaBoube, Eds., University of
Missouri-Rolla, Oct. 1990.
8.33 American Welding Society: “Recommended Practice for
Resistance Welding Coated Low-Carbon Steels,” AWS
C1.3-70, 1970, Miami, FL, reaffirmed 1987.
8.34 American Welding Society: “Recommended Practice
for Resistance Welding,” AWS C1.1-66, Miami, FL,
1966.
8.35 Green, E. A., and J. J. Riley: “Resistance Spot Welding
Galvanized Steel of Thicknesses 0.022 to 0.138 in.,”
Welding Research Supplement , Oct. 1963.
8.36 Henschkel, J.: “The Expression of Spot-Weld Properties,”
Welding Journal, Oct. 1952.
8.37 Winter, G.: “Tests on Bolted Connections in Light Gage
Steel,” Journal of the Structural Division, ASCE Proceed-
ings, vol. 82, Mar. 1956.
8.38 Winter, G.: “Light Gage Steel Connections with High-
Strength, High Torqued Bolts,” Publication of the Interna-
tional Association for Bridge and Structural Engineering,
vol. 16, 1956, p. 513.
466 REFERENCES
8.39 Dhalla, A. K., S. J. Errera, and G. Winter: “Connections
in Thin Low-Ductility Steels,” Journal of the Structural
Division, ASCE Proceedings, vol. 97, Oct. 1971.
8.40 Popowich, D. W.: “Tension Capacity of Bolted Connec-
tions in Light Gage Cold-Formed Steel,” M.S. Thesis,
Cornell University, Ithaca, NY, 1969.
8.41 McKinney, W. M., A. S. Liu, and W. W. Yu: “Study
of Cold-Formed Steel Structural Members Made of Thick
Sheets and Plates,” Final Report, University of Missouri-
Rolla, Apr. 1975.
8.42 Chong, K. P., and R. B. Matlock: “Light Gage Steel Bolted
Connections without Washers,” Journal of the Structural
Division, ASCE Proceedings, vol. 101, July 1975.
8.43 Gilchrist, R. T., and K. P. Chong: “Thin Light-Gage Bolted
Connections without Washers,” Journal of the Structural
Division, ASCE Proceedings, vol. 105, Jan. 1979.
8.44 Rang, T. N., W. W. Yu, T. V. Galambos, and M. K.
Ravindra: “Load and Resistance Factor Design of Bolted
Connections,” in Thin-Walled Structures, J. Rhodes and
A. C. Walker, Eds., Granada Publishing, New York, Apr.
3–6, 1979.
8.45 Yu, W. W., and R. L. Mosby: “Bolted Connections in
Cold-Formed Steel Structures,” Final Report, University
of Missouri-Rolla, Jan. 1981.
8.46 Yu, W. W: “AISI Design Criteria for Bolted Connections,”
in Proceedings of the 6th International Specialty Confer-
ence on Cold-Formed Steel Structures, W. W. Yu and J.
H. Senne, Eds., University of Missouri-Rolla, Nov. 1982.
8.47 Research Council on Structural Connections: “Allowable
Stress Design Specification for Structural Joints Using
ASTM A325 or A490 Bolts,” AISC, Chicago, IL, Nov.
13, 1985.
8.48 Kulak, G. L., J. W. Fisher, and J. H. A. Struik: Guide
to Design Criteria for Bolted and Riveted Joints, 2nd ed.,
Wiley, New York, 1987.
8.49 Stark, J. W. B., and A. W. Toma: “Fastening of Steel
Sheets for Walls and Roofs on Steel Structures,” in Thin-
Walled Structures, J. Rhodes and A. C. Walker, Eds.,
Granada Publishing, New York, Apr. 3–6, 1979.
8.50 Stark, J. W. B., and A. W. Toma: “Connections in Thin-
Walled Structures,” in Developments in Thin-Walled Struc-
tures, Vol. 1, J. Rhodes and A. C. Walker, Eds., Applied
Science Publishers, London, 1982.
8.51 Marsh, C.: “Tear-Out Failure of Bolt Groups,” Journal of
the Structural Division, ASCE Proceedings, vol. 105, Oct.
1979.
8.52 LaBoube, R. A.: “Strength of Bolted Connections: Is
It Bearing or Net Section?” in Proceedings of the 9th
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1988.
8.53 Baehre, R., and L. Berggren: “Joints in Sheet Metal
Panels,” Document D8, National Swedish Building
Research, Sweden 1973.
8.54 Pekoz, T.: “Design of Cold-Formed Steel Screw Connec-
tions,” in Proceedings of the 10th International Specialty
Conference on Cold-Formed Steel Structures,W.W.Yu
and R. A. LaBoube, Eds., University of Missouri-Rolla,
Oct. 1990.
8.55 Eastman, R. W.: “Report on Screw Fastened Sheet Steel
Connections,” Vols. I and II, DOFASCO, Hamilton,
Ontario, Canada, Jan. 1976.
8.56 McCavour Engineering: “Screw Fastener Connections,”
Research 578, Etobicoke, Ontario, Canada, June 1980.
8.57 Strnad, M.: “Flexibility of Mechanical Fastenings of Very
Thin-Walled Steel Structures,” International Journal of
Thin-Walled Structures, vol. 2, no. 3, 1984.
8.58 Strnad, M.: “Design of Screwed Fastenings with Regard
to Their Elasto-Plastic Behaviour,” in Der Metallbau im
Konstruktiven-Ingenieurbau, Karlsruhe, West Germany,
Feb. 1988.
8.59 Ellifritt, D. S., and R. Burnett: “Pull-over Strength of
Screws in Simulated Building Tests,” in Proceedings of the
10th International Specialty Conference on Cold-Formed
Steel Structures, W. W. Yu and R. A. LaBoube, Eds.,
University of Missouri-Rolla, Oct. 1990.
8.60 Yener, M.: “Criteria for Connection Spacing in Cold-
Formed Steel,”
Journal of the Structural Division, ASCE
Pr
oceedings, vol. 110,
no. 9, Sept. 1984.
8.61 Klippstein, K. H.: “Discussion of Criteria for Connection
Spacing in Cold-Formed Steel by M. Yener,” Journal of
Structural Engineering, ASCE Proceedings, vol. 112, no.
12, Dec. 1986.
8.62 Yener, M.: “Spacing of Connections in Thin-Walled
Compression Elements,” in Proceedings, IABSE Collo-
quium, on Thin-Walled Structures, Stockholm, Sweden,
June 1986.
8.63 Brockenbrough, R. L.: “Fastening of Cold-Formed Steel
Framing,” American Iron and Steel Institute, Washington,
DC, Sept. 1995.
8.64 Pedreschi, R. F., B. P. Sinha, and R. Davies: “Advanced
Connection Techniques for Cold-Formed Steel Structures,”
Journal of Structural Engineering, ASCE, vol. 123, no. 2,
Feb. 1997.
8.65 Pedreschi, R., B. Sinha, R. Davies, and R. Lennon:
“Factors Influencing the Strength of Mechanical
Clinching,” in Proceedings of the 14th International
Specialty Conference on Cold-Formed Steel Structures,
W. W. Yu and R. A. LaBoube, Eds., University of
Missouri-Rolla, Oct. 1998.
8.66 LaBoube, R. A., and W. W. Yu: “Tensile Strength
of Welded Connections,” Final Report, University of
Missouri-Rolla, June 1991.
8.67 LaBoube, R. A., and W. W. Yu: “Behavior of Arc Spot
Weld Connections in Tension,” Journal of Structural Engi-
neering, ASCE , vol. 119, no. 7, July 1993. Also in
Proceedings of the 11th International Specialty Conference
on Cold-Formed Steel Structures,W.W.YuandR.A.
LaBoube, Eds., University of Missouri-Rolla, Oct. 1992.
8.68 Zhao, X. L., and G. J. Hancock: “T-Joints in Rectangular
Hollow Sections Subject to Combined Actions,” Journal
of Structural Engineering, ASCE , vol. 117, no. 8, Aug.
1991.
REFERENCES 467
8.69 Zhao, X. L., and G. J. Hancock: “Butt Welds and Trans-
verse Fillet Welds in Thin Cold-Formed RHS Members,”
Journal of Structural Engineering, ASCE , vol. 121, no. 11,
Nov. 1995.
8.70 Zhao, X. L., and G. J. Hancock: “Longitudinal Fillet
Weld in Thin Cold-Formed RHS Members,” Journal of
Structural Engineering, ASCE , vol. 121, no. 11, Nov.
1995.
8.71 Zadanforrokh, F., and E. R. Bryan: “Testing and Design
of Bolted Connections in Cold-Formed Steel Sections,” in
Proceedings of the 11th International Specialty Conference
on Cold-Formed Steel Structures,W.W.YuandR.A.
LaBoube Eds., University of Missouri-Rolla, Oct. 1992.
8.72 Seleim, S., and R. A. LaBoube: “Behavior of Low
Ductility Steel in Cold-Formed Steel Connections,” Thin-
Walled Structures, vol. 25, no. 2, 1996.
8.73 Kulak, G. L., and E. Y Wu: “Shear Lag in Bolted Angle
Tension Members,” Journal of Structural Engineering,
vol. 123, no. 9, Sept. 1997.
8.74 Wheeler, A. T., M. J. Clarke, G. J. Hancock, and T.
M. Murray: “Design Model for Bolted Moment End
Plate Connections Joining Rectangular Hollow Sections,”
Journal of Structural Engineering, vol. 124, no. 2, Feb.
1998.
8.75 American Iron and Steel Institute: “Fasteners for Residen-
tial Steel Framing,” Publication RG-933, Washington, DC,
June 1993.
8.76 Xu, Y. L.: “Fatigue Performance of Screw-Fastened Light-
Gauge-Steel Roofing Sheets,” Journal of Structural Engi-
neering, ASCE , vol. 121, no. 3, Mar. 1995.
8.77 Daudet, L. R., and R. A. LaBoube: “Shear Behavior of
Self-Drilling Screws Used in Low Ductility Steel,” in
Proceedings of the 13th International Specialty Confer-
ence on Cold-Formed Steel Structures,W.W.Yuand
R. A. LaBoube, Eds., University of Missouri-Rolla, Oct.
1996.
8.78 Serrette, R., and V. Lopez: “Performance of Self-Tapping
Screws in Lap-Shear Metal-to-Metal Connections,” in
Proceedings of the 13th International Specialty Confer-
ence on Cold-Formed Steel Structures,W.W.Yuand
R. A. LaBoube, Eds., University of Missouri-Rolla, Oct.
1996.
8.79 Fan, L. X., J. Rondal, and S. Cescotto: “Numerical Simu-
lation of Lap Screw Connections,” Thin-Walled Structures,
vol. 29, nos. 1–4, 1997.
8.80 Kreiner, J. S., and D. S. Ellifritt: “Understanding
Pullover,” in Proceedings of the 14th International
Specialty Conference on Cold-Formed Steel Structures,W.
W. Yu and R. A. LaBoube, Eds., University of Missouri-
Rolla, Oct. 1998.
8.81 Anderson, G. A., and V. C. Kelley: “Lateral Load Strength
of Screw Connections in 29 Ga Metal,” in Proceed-
ings of the 14th International Specialty Conference on
Cold-Formed Steel Structures,W.W.YuandR.A.
LaBoube, Eds., University of Missouri-Rolla, Oct. 1998.
8.82 Sokol, M. A., R. A. LaBoube, and W. W. Yu: “Deter-
mination of the Tensile and Shear Strength of Screws
and the Effect of Screw Patterns on Cold-Formed Steel
Connections,” Civil Engineering Study 98-3, University
of Missouri-Rolla, Dec. 1998.
8.83 Center for Cold-Formed Steel Structures: “AISI Specifica-
tion Provisions for Screw Connections,” CCFSS Technical
Bulletin, vol. 2., no. 1, Feb. 1993, University of Missouri-
Rolla.
8.84 Davies, R., R. Pedreschi, and B. P. Sinha: “The Shear
Behaviour of Press-Joining in Cold-Formed Steel Struc-
tures,” Thin-Walled Structures, vol. 25, no. 3, 1996.
8.85 Davies, R., R. Pedreschi, and B. P. Sinha: “Moment-
Rotation Behaviour of Groups of Press-Joints in
Cold-Formed Steel Structures,” Thin-Walled Structures,
vol. 27, no. 3, 1997.
8.86 Pedreschi, R. F., B. P. Sinha, and R. J. Davies: “End Fixity
in Cold-Formed Steel Sections Using Press Joining,” Thin-
Walled Structures, vol. 29, nos. 1–4, 1997.
8.87 Makelainen, P., J. Kosti, O. Kaitila, and K. J. Sahramaa:
“Study on Light-Gauge Steel Roof Trusses with Rosette
Connections,” in Proceedings of the 14th International
Specialty Conference on Cold-Formed Steel Structures,W.
W. Yu and R. A. LaBoube, Eds., University of Missouri-
Rolla, Oct. 1998.
8.88 Metal Home Digest: “New Approach to Fabricating Light-
Gauge Products Designed for
Economy,” Nov.–Dec. 1998.
8.89
Birkemoe, P. C., and M. I. Gilmor: “Behavior of Bearing-
Critical Double-Angle Beam Connections,” AISC Engi-
neering Journal, 4th Quarter, 1978.
8.90 Richles, J. M., and J. A. Yura: “Strength of Double-
Row Bolted Web Connections,” Journal of the Structural
Division, ASCE , vol. 109, no. ST1, Jan. 1983.
8.91 Hardash, S. G., and R. Bjorhovde: “New Design Criteria
for Gusset Plates in Tension,” AISC Engineering Journal,
2nd Quarter, 1985.
8.92 Luttrell, L. D., and K. Balaji: “Properties for Cellular
Deck in Negative Bending,” in Proceedings of the 11th
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and R. A. LaBoube, Eds., University
of Missouri-Rolla, Oct. 1992.
8.93 LaBoube, R. A., W. W. Yu, and M. L. Jones: “Spacing
of Connections in Compression Flanges of Built-Up Cold-
Formed Steel Beams,” in Proceedings of the 14th Interna-
tional Specialty Conference on Cold-Formed Steel Struc-
tures, W. W. Yu, and R. A. LaBoube, Eds., University of
Missouri-Rolla, Oct. 1998.
8.94 Tillman, S. C.: “The Effects of Connector Spacing and
Distribution on the Buckling Behaviour of Some Single-
Cell and Twin-Cell Box Columns,” Thin-Walled Struc-
tures, vol. 14, 1992.
8.95 Serrette, R., I. Lam, H. Qi, H. Hernandez, and A. Toback:
“Cold-Formed Steel Frame Shear Walls Applications
with Structural Adhesives,” in Proceedings of the 17th
International Specialty Conference on Cold-Formed Steel
Structures, R. A. LaBoube and W. W. Yu, Eds., University
of Missouri-Rolla, Oct. 2004.
468 REFERENCES
8.96 American Welding Society (2008), Structural Welding
Code—Sheet Steel, ANSI/AWS D1.3-08, Miami, FL,
2008.
8.97 LaBoube, R. A.: “Tension on Arc Spot Welded
Connections—AISI Section E2.2.2,” University of
Missouri-Rolla, 2001
8.98 LaBoube, R. A.: “Arc Spot Welds in Sheet-to-Sheet
Connections,” Department of Civil Engineering, Univer-
sity of Missouri-Rolla, 2001.
8.99 Snow, G., and W. S. Easterling, “Strength of Arc-Spot
Welds Made in Single and Multiple Steel Sheets,” in
Proceedings of the 19th International Specialty Confer-
ence on Cold-Formed Steel Structures, R. A. LaBoube
and W. W. Yu, Eds., Missouri University of Science &
Technology, Oct. 2008.
8.100 Stirnemann, L. K., and R. A. LaBoube: “Behavior of Arc
Spot Weld Connections Subjected to Combined Shear and
Tension Forces,” in Proceedings of the 19th International
Specialty Conference on Cold-Formed Steel Structures,R.
A. LaBoube and W. W. Yu, Eds., Missouri University of
Science & Technology, Rolla, MO, Oct. 2008.
8.101 Teh, L. H., and G. J. Hancock: “Strength of Fillet
Welded Connections in G450 Sheet Steels,” Research
Report R802, Centre for Advanced Structural Engineering,
University of Sydney, July 2000.
8.102 Pasternak, H., and J. Meinz: “Adhesive Bonding—A
Promising Joining Technique Also for Steel Construction,”
in Proceedings of the Fifth International Conference on
Thin-Walled Structure, M. Mahendran, Ed., Queensland
University of Technology, Brisbane, June 2008.
8.103 Moss, S. R., and M. Mahendran: “Structural Behavior
of Self-Piercing Riveted Connections in G300 and G550
Thin Sheet Steel,” in Proceedings of the International
Confernce on Advances in Structures,K.Rasmussenand
T. Wilkinson, Eds., University of Sydney, June, 2003.
8.104 American Welding Society: Recommended Practices
for Resistance Welding, ANSI/AWS C1.1/C1.1M-2000,
Miami, FL, 2000.
8.105 Wallace, J. A., R. A. LaBoube, and R. M. Schuster:
“Testing of Bolted Cold-Formed Steel Connections in
Bearing,” University of Waterloo, Canada, 2001.
8.106 Wallace, J. A., R. A. LaBoube, and R. M. Schuster:
“Calibration of Bolted Cold-Formed Steel Connections
in Bearing (With and Without Washers),” University of
Waterloo, Waterloo, Ontario, Canada, 2001.
8.107 Rogers, C. A., and G. J. Hancock: “Bolted Connection
Tests of Thin G550 and G300 Sheet Steels,” Journal of
Structural Engineering, ASCE , vol. 124, no. 7, 1998.
8.108 Research Council on Structural Connections: “Specifica-
tion for Structural Joints Using ASTM A325 or A490
Bolts,” Rolla, MO, June 30, 2004.
8.109 ASTM International: Standard Specification for Steel
Tapping Screws for Cold-Formed Steel Framing Connec-
tions, ASTM C1513, West Conshohocken, PA, 2004.
8.110 Cold-Formed Steel Engineers Institute: Screw Fastener
Selection for Cold-Formed Steel Frame Construction,
Technical Note 565c, Washington, DC, 2009.
8.111 American Iron and Steel Institute: North American Stan-
dard for Cold-Formed Steel Framing—General Provi-
sions, AISI S200-2007, Washington, DC, 2007.
8.112 American Iron and Steel Institute: Commentary on
the North American Standard for Cold-Formed Steel
Framing—General Provisions, AISI S200-2007, Wash-
ington, DC, 2007.
8.113 Lease, A., and W. S. Easterling: “The Influence of
Insulation of the Shear Strength of Screw Connec-
tions,” in Proceedings of the Eighteenth International
Specialty Conference on Cold-Formed Steel Structures,R.
A. LaBoube and W. W. Yu, Eds., Missouri University of
Science & Technology, Rolla, MO, Oct. 2006.
8.114 Zwick, K., and R. A. LaBoube: “Self-Drilling Screw
Connections Subjected to Combined Shear and Tension,”
Final Report, Wei-Wen Yu Center for Cold-Formed Steel
Structures, University of Missouri-Rolla, 2002.
8.115 Carr, J., A. Mansour, and J. Mills: “Self-Drilling Knee-
Joints for Cold-Formed Steel Portal Frames in Cyclonic
Regions,” in Proceedings of the Seventeenth International
Specialty Conference on Cold-Formed Steel Structures,
R. A. LaBoube and W. W. Yu, Eds., Missouri University
of Science & Technology, Rolla, MO, Oct. 2004.
8.116 Fulop, L. A., and D. Dubina: “Design Criteria for Seam
and Sheeting-to-Framing Connections of Cold-Formed
Steel Shear Panels,” in Pr
oceedings of t
he Seventeenth
International Specialty Conference on Cold-Formed Steel
Structures, R. A. LaBoube and W. W. Yu, Eds., Missouri
University of Science & Technology, Rolla, MO, Oct.
2004.
8.117 Mahaarachchi, D., and M. Mahendran: “Pull-Through Fail-
ures of Crest-Fixed Claddings Initiated by Transverse
Splitting,” in Proceedings of the Fifteenth International
Specialty Conference on Cold-Formed Steel Structures,R.
A. LaBoube, and W. W. Yu, Eds., Missouri University of
Science & Technology, Rolla, MO, Oct. 2000.
8.118 Manhendran, M., and D. Mahaarachchi: “Cyclic Pull-
Out Strength of Steel Roof and Wall Cladding Systems,”
in Proceedings of the Fifteenth International Specialty
Conference on Cold-Formed Steel Structures,R.A.
LaBoube, and W. W. Yu, Eds., Missouri University of
Science & Technology, Rolla, MO, Oct. 2000.
8.119 Cold-Formed Steel Engineers Institute: Power Actuated
Fasteners in Cold-Formed Steel Construction, Tech Note
562, Washington, DC, 2009.
CHAPTER 9
9.1 Nilson, A. H.: “Diaphragm Action in Light Gage Steel
Construction,” AISI Regional Technical Paper, American
Iron and Steel Institute, New York, NY, 1960.
9.2 Nilson, A. H.: “Shear Diaphragms of Light Gage Steel,”
Journal of the Structural Division, ASCE Proceedings, vol.
86, Nov. 1960.
9.3 Luttrell, L. D.: “Structural Performance of Light Gage
Steel Diaphragms,” Report 319, Department of Structural
Engineering, Cornell University, Ithaca, NY, Aug. 1965.
REFERENCES 469
9.4 Apparao, T. V. S. R.: “Tests on Light Gage Steel
Diaphragms,” Report 328, Department of Structural Engi-
neering, Cornell University, Ithaca, NY, Dec. 1966.
9.5 Luttrell, L. D.: “Strength and Behavior of Light Gage Steel
Shear Diaphragms,” Department of Structural Engineering,
Cornell University, Ithaca, NY, 1967.
9.6 American Iron and Steel Institute: “Design of Light Gage
Steel Diaphragms,” 1st ed., Washington, DC, 1967.
9.7 Nilson, A. H.: “Analysis of Light Gage Steel Shear
Diaphragms,” in Proceedings of the 2nd Specialty Confer-
ence on Cold-Formed Steel Structures,W.W.YuEd.,
University of Missouri-Rolla, Oct. 1973.
9.8 Nilson, A. H., and A. R. Ammar: “Finite Element Analysis
of Metal Deck Shear Diaphragms,” Journal of the Struc-
tural Division, ASCE Proceedings, vol. 100, Apr. 1974.
9.9 Atrek, E., and A. H. Nilson: “Nonlinear Analysis of
Cold-Formed Steel Shear Diaphragms,” Journal of the
Structural Division, ASCE Proceedings, vol. 106, Mar.
1980.
9.10 Ellifritt, D. S., and L. D. Luttrell: “Strength and Stiffness
of Steel Deck Shear Diaphragms,” in Proceedings of the
1st Specialty Conference on Cold-Formed Steel Structures,
W. W. Yu Ed., University of Missouri-Rolla, Aug. 1971.
9.11 Luttrell, L. D.: “Shear Diaphragms with Lightweight
Concrete Fill,” in Proceedings of the 1st Specialty Confer-
ence on Cold-Formed Steel Structures,W.W.YuEd.,
University of Missouri-Rolla, Aug. 1971.
9.12 Luttrell, L. D.: “Screw Connected Shear Diaphragms,”
in Proceedings of the 2nd Specialty Conference on Cold-
Formed Steel Structures, W. W. Yu Ed., University of
Missouri-Rolla, Oct. 1973.
9.13 Huang, H. T., and L. D. Luttrell: “Theoretical and Physical
Evaluation of Steel Shear Diaphragms,” in Proceedings
of the 5th International Specialty Conference on Cold-
Formed Steel Structures,W.W.YuandJ.H.Senne,Eds.,
University of Missouri-Rolla, Nov. 1980.
9.14 Easley, J. T., and D. E. McFarland: “Buckling of Light-
Gage Corrugated Metal Shear Diaphragms,” Journal of the
Structural Division, ASCE Proceedings, vol. 95, July 1969.
9.15 Easley, J. T.: “Buckling Formulas for Corrugated Metal
Shear Diaphragms,” Journal of the Structural Division,
ASCE Proceedings, vol. 101, July 1975.
9.16 Easley, J. T.: “Strength and Stiffness of Corrugated Metal
Shear Diaphragms,” Journal of the Structural Division,
ASCE Proceedings, vol. 103, Jan. 1977.
9.17 Miller, C. J.: “Drift Control with Light Gage Steel Infill
Panels,” in Proceedings of the 2nd Specialty Conference on
Cold-Formed Steel Structures,W.W.YuEd.,University
of Missouri-Rolla, Oct. 1973.
9.18 Libove, C.: “On the Stiffness, Stresses and Buckling Anal-
ysis of Corrugated Shear Webs,” in Proceedings of the 2nd
Specialty Conference on Cold-Formed Steel Structures,W.
W. Yu Ed., University of Missouri-Rolla, Oct. 1973.
9.19 Wu, L. H., and C. Libove: “Curvilinearly Corrugated
Plates in Shear,” Journal of the Structural Division, ASCE
Proceedings, vol. 101, Nov. 1975.
9.20 Hussain, M. I., and C. Libove: “Trapezoidally Corrugated
Plates in Shear,” Journal of the Structural Division, ASCE
Proceedings, vol. 102, May 1976.
9.21 Libove, C.: “Buckling of Corrugated Plates in Shear,”
presented at the International Colloquium on Stability of
Structures under Static and Dynamic Loads, Washington,
DC, May 1977.
9.22 Chern, C., and J. L. Jorgenson: “Shear Strength of Deep
Corrugated Steel Panels,” in Proceedings of the 2nd
Specialty Conference on Cold-Formed Steel Structures,W.
W. Yu Ed., University of Missouri-Rolla, Oct. 1973.
9.23 Liedtke, P. E., and D. R. Sherman: “Comparison of
Methods Predicting Diaphragm Behavior,” in Pr
oceedings
of the 5th International
Specialty Conference on Cold-
Formed Steel Structures,W.W.YuandJ.H.Senne,Eds.,
University of Missouri-Rolla, Nov. 1982.
9.24 Fisher, J. M., and D. L. Johnson: “Behavior of Light Gage
Diaphragms Coupled with X-Bracing,” in Proceedings
of the 2nd Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu Ed., University of Missouri-Rolla,
Oct. 1973.
9.25 Fisher, J. M.: “Strength and Stiffness of Light Gauge
Steel Diaphragms,” Proceedings of the Cold-Formed Steel
Structures Conference, W. W. Yu and J. H. Senne, Eds.,
University of Windsor, Ont., Canada, Apr. 1980.
9.26 LaBoube, R. A., and J. M. Fisher: “Diaphragm Strength
of Composite Roof System,” in Proceedings of the 6th
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1982.
9.27 Chockalingam, S., P. Fazio, and K. Ha: “Strengths of
Cold Formed Steel Shear Diaphragms,” in Proceedings
of the 4th International Specialty Conference on Cold-
Formed Steel Structures,W.W.YuandJ.H.Senne,Eds.,
University of Missouri-Rolla, June 1978.
9.28 Ha, H. K., S. Chockalingam, and P. Fazio: “Further Study
on the Strength of Cold-Formed Shear Diaphragms,” in
Thin-Walled Structures, J. Rhodes and A. C. Walker, Eds.,
Granada Publishing, New York, Apr. 1979.
9.29 Ha, H. K.: “Corrugated Shear Diaphragms,” Journal of
the Structural Division, ASCE Proceedings, vol. 105, Mar.
1979.
9.30 Ha, H. K., N. El-Hakim, and P. P. Fazio: “Simplified
Design of Corrugated Shear Diaphragms,” Journal of the
Structural Division, ASCE Proceedings, vol. 105, July
1979.
9.31 Abdel-Sayed, G.: “Critical Shear Loading of Curved
Panels of Corrugated Sheets with Restrained Edges,” in
Proceedings of the 1st Specialty Conference on Cold-
Formed Steel Structures,W.W.Yu,Ed.,Universityof
Missouri-Rolla, Aug. 1971.
9.32 Bryan, E. R.: “Calculation of Sheet Steel Diaphragms in
the U.K.,” in Proceedings of the 3rd International Specialty
Conference on Cold-Formed Steel Structures,W.W.Yu
and J. H. Senne, Eds., University of Missouri-Rolla, Nov.
1975.
470 REFERENCES
9.33 Bryan, E. R., and J. M. Davies: “Stressed Skin Construc-
tion in the U.K.,” in Proceedings of the 3rd International
Specialty Conference on Cold-Formed Steel Structures,W.
W. Yu and J. H. Senne, Eds., University of Missouri-Rolla,
Nov. 1975.
9.34 Davies, J. M., and R. M. Lawson: “The Shear Flexibility
of Corrugated Steel Sheeting,” in Proceedings of the 3rd
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1975.
9.35 Davies, J. M.: “Calculation of Steel Diaphragm Behavior,”
Journal of the Structural Division, ASCE Proceedings, vol.
102, July 1976.
9.36 Davies, J. M.: “Simplified Diaphragm Analysis,” Journal
of the Structural Division, ASCE Proceedings, vol. 103,
Nov. 1977.
9.37 Davies, J. M.: “Developments in Inexpensive Lightweight
Structures,” in Proceedings of the 4th International
Specialty Conference on Cold-Formed Steel Structures,W.
W. Yu and J. H. Senne, Eds., University of Missouri-Rolla,
June 1978.
9.38 Davies, J. M., and E. R. Bryan: “Design Tables for Light
Gauge Steel Diaphragms,” in Thin-Walled Structures,J.
Rhodes and A. C. Walker, Eds., Granada Publishing, New
York, Apr. 1979.
9.39 Davies, J. M., and E. R. Bryan: Manual of Stressed Skin
Diaphragm Design, Granada Publishing, New York, 1982.
9.40 El-Dakhakhni, W. M.: “Shear of Light-Gage Partitions in
Tall Buildings,” Journal of the Structural Division, ASCE
Proceedings, vol. 102, July 1976.
9.41 El-Dakhakhni, W. M.: “Effect of Light-Gage Partitions on
Multistory Buildings,” Journal of the Structural Division,
ASCE Proceedings, vol. 103, Jan. 1977.
9.42 American Iron and Steel Institute: Design of Cold-Formed
Steel Diaphragms, New York, NY, 1967.
9.43 American Society for Testing and Materials: “Standard
Method for Static Load Testing of Framed Floor or
Roof Diaphragm Constructions for Buildings,” ASTM,
ANSI/ASTM E 455-04.
9.44 American Society for Testing and Materials: “Standard
Practice for Static Load Test for Shear Resistance of
Framed Walls for Buildings,” ANSI/ASTM E 564-06.
9.45 Steel Deck Institute: Steel Deck Institute Design Manual ,
Canton, OH, 1987.
9.46 Department of the Army—TM 5-809-10, Department of
the Navy—NAVDOCKS-P-355, and Department of the
Air Force—AFM 88-3, “Seismic Design for Buildings,”
Washington, DC, Feb. 1982, Chap. 13.
9.47 European Convention for Constructional Steelwork:
“European Recommendations for the Stressed Skin Design
of Steel Structures,” ECCS-XVII-77-IE, Constrado,
England, Mar. 1977.
9.48 Bryan, E. R., and J. M. Davies: Steel Diaphragm Roof
Decks—A Design Guide with Tables for Engineers and
Architects, Granada Publishing, New York, 1981.
9.49 Canadian Sheet Steel Building Institute: “Diaphragm
Action of Cellular Steel Floor and Roof Deck Construc-
tion,” Information Bulletin 3, Cambridge, Ontario, Canada,
Dec. 1972.
9.50 Apparao, T. V. S. R., and S. J. Errera: “Design Recommen-
dations for Diaphragm-Braced Beams, Columns and Wall
Studs,” Report 332, Department of Structural Engineering,
Cornell University, Ithaca, NY, Oct. 1968.
9.51 Apparao, T. V. S. R., S. J. Errera, and G. P. Fisher:
“Columns Braced by Girts and a Diaphragm,” Journal of
the Structural Division, ASCE Proceedings, vol. 95, May
1969.
9.52 Errera, S. J., and T. V. S. R. Apparao: “Design of I-
Shaped Columns with Diaphragm Bracing,” Journal of
the Structural Division, ASCE Proceedings, vol. 102, Sept.
1976.
9.53 Simaan, A.: “Buckling of Diaphragm-Braced Columns of
Unsymmetrical Sections and Applications to Wall Studs
Design,” Report 353, Department of Structural Engi-
neering, Cornell University, Ithaca, NY, Aug. 1973.
9.54 Simaan, A., and T. Pekoz: “Cold-Formed Steel Wall Stud
Design,” in Proceedings of the 2nd Specialty Conference
on Cold-Formed Steel Structures,W.W.YuEd.,Univer-
sity of Missouri-Rolla, Oct. 1973.
9.55
Simaan, A.,
and T. Pekoz: “Diaphragm Braced Members
and Design of Wall Studs,” Journal of the Structural
Division, ASCE Proceedings, vol. 102, Jan. 1976.
9.56 Simaan, A., and T. Pekoz: “An Exploratory Study on the
Behavior of Cold-Formed Steel Wall Studs,” Report 82-14,
Department of Structural Engineering, Cornell University,
Ithaca, NY, Sept. 1982.
9.57 Pekoz, T., and P. Soroushian: “Behavior of C- and Z-
Purlins under Wind Uplift,” in Proceedings of the 6th
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1982.
9.58 Heins, C. P., and D. Blank: “Box Beam Stiffening Using
Cold-Formed Decks,” in Proceedings of the 2nd Specialty
Conference on Cold-Formed Steel Structures,W.W.Yu,
Ed., University of Missouri-Rolla, Oct. 1973.
9.59 Thulin, F. A., and J. L. Lutfallah: “Cold-Formed Steel
Framing with Gypsum Facing,” in Proceedings of the
2nd Specialty Conference on Cold-Formed Steel Struc-
tures, W. W. Yu, Ed., University of Missouri-Rolla, Oct.
1973.
9.60 McDermott, J. F.: “Load Tests on Steel-Stud Walls,” in
Proceedings of the 3rd International Specialty Conference
on Cold-Formed Steel Structures,W.W.YuandJ.H.
Senne, Eds., University of Missouri-Rolla, Nov. 1975.
9.61 Ife, L. W.: “The Performance of Cold-Formed Steel Prod-
ucts in Housing,” in Proceedings of the 3rd International
Specialty Conference on Cold-Formed Steel Structures,W.
W. Yu and J. H. Senne, Eds., University of Missouri-Rolla,
Nov. 1975.
9.62 McCreless, C. S., and T. S. Tarpy: “Experimental Investi-
gation of Steel Stud Shear Wall Diaphragms,” in Proceed-
ings of the 4th International Specialty Conference on
REFERENCES 471
Cold-Formed Steel Structures,W.W.YuandJ.H.Senne,
Eds., University of Missouri-Rolla, June 1978.
9.63 Tarpy, T. S., and S. F. Havenstein: “Application of Light
Gauge Steel-Stud Research in Building Design,” in Thin-
Walled Structures, J. Rhodes and A. C. Walker, Eds.,
Granada Publishing, New York, Apr. 1979.
9.64 Tarpy, T. S.: “Shear Resistance of Steel-Stud Wall Panels,”
in Proceedings of the 5th International Specialty Confer-
ence on Cold-Formed Steel Structures,W.W.Yuand
J. H. Senne, Eds., University of Missouri-Rolla, Nov.
1980.
9.65 Tarpy, T. S., and J. D. Girard: “Shear Resistance of Steel
Stud Wall Panels,” in Proceedings of the 6th International
Specialty Conference on Cold-Formed Steel Structures,W.
W. Yu and J. H. Senne, Eds., University of Missouri-Rolla,
Nov. 1982.
9.66 Schurter, P. G., R. M. Schuster, and A. S. Zakrzewski:
“Combined Compression and Lateral Loads on Load-
Bearing Steel Stud Walls,” in Proceedings of the 6th
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1982.
9.67 American Iron and Steel Institute: “Fire Resistance Ratings
of Load-Bearing Steel Stud Walls with Gypsum Wallboard
Protection with or without Cavity Insulation,” FT-901,
Washington, DC, 1981.
9.68 Baer, O.: “Steel Frame Folded Plate Roof,” Journal of
the Structural Division, ASCE Proceedings, vol. 87, June
1961.
9.69 Shapiro, D.: “Load Test Steel Folded-Plate Roof,” Engi-
neer News-Record, July 27, 1961.
9.70 Nilson, A. H.: “Light Gage Steel Shell Roofs,” in Proceed-
ings of the World Conference on Steel Structures,Oct.
1962.
9.71 H. H. Robertson Company: “Folded Plate Design,” Pitts-
burgh, PA, 1967.
9.72 “Ideas on Arc-Welded Steel Roofs,” Civil Engineering,
Aug. 1962.
9.73 Kirkgaard, W. H.: “Four Welded Steel Deck Sections in
H-P Roof,” in Modern Welded Structures,vol.1,The
James F. Lincoln Arc Welding Foundation, Cleveland, OH,
1963.
9.74 Hutton, C. R.: “Curvilinear Grid Frames,” Engineering
Journal, AISC , vol. 1, July 1964.
9.75 Hutton, C. R.: “Development of the Concepts of Curvi-
linear Grid Frames,” Inland Steel Company, Chicago, IL,
Apr. 1965.
9.76 American Institute of Steel Construction: “Design
Examples—Space Forms in Steel,” Chicago, IL, 1966.
9.77 Davies, J. M., E. R. Bryan, and R. M. Lawson: “Design
and Testing of a Light Gauge Steel Folded Plate Roof,” in
Proceedings, Institution of Civil Engineers, Part II, June
1977.
9.78 Lawson, R. M.: “Design Formulas for Steel Folded Plate
Roofs,” Journal of the Structural Division, ASCE Proceed-
ings, vol. 104, Oct. 1978.
9.79 Nilson, A. H.: “Testing of Light Gage Steel Hyper-
bolic Paraboloid Shell,” Journal of the Structural Division,
ASCE Proceedings, vol. 88, Oct. 1962.
9.80 Gergely, P.: “Design of Cold-Formed Hyperbolic
Paraboloid Shells,” in Proceedings of the 1st Specialty
Conference on Cold-Formed Steel Structures, W. W. Yu,
Ed., University of Missouri-Rolla, Aug. 1971.
9.81 Portland Cement Association: “Elementary Analysis of
Hyperbolic Paraboloid Shells,” Chicago, IL, 1960.
9.82 Muskat, R.: “Buckling of Orthotropic Hyperbolic
Paraboloids,” Ph. D. Thesis, Cornell University, Ithaca,
NY, 1969.
9.83 Parker, J. E.: “Behavior of Light Gage Steel Hyperbolic
Paraboloid Shells,” Ph. D. Thesis, Cornell University,
Ithaca,
NY, June 1969.
9.84 Ger
gely, P., and J. E. Parker: “Thin-Walled Hyperbolic
Paraboloid Structures,” Final Report, International Asso-
ciation for Bridge and Structural Engineering, Zurich,
Switzerland, Sept. 9–14, 1968.
9.85 Banavalkar, P. V., and P. Gergely: “Analysis of Thin Steel
Hyperbolic Paraboloid Shells,” Preprint 1320, ASCE paper
presented at the National Water Resources Engineering
Meeting, New York, Jan. 1971.
9.86 Gergely, P., and G. Winter: “Experimental Investigation of
Thin-Steel Hyperbolic Paraboloid Structures,” Journal of
the Structural Division, ASCE Proceedings, vol. 98, Oct.
1972.
9.87 Banavalkar, P. V., and P. Gergely: “Analysis of Thin-Steel
Hyperbolic Paraboloid Shells,” Journal of the Structural
Division, ASCE Proceedings, vol. 98, Nov. 1972.
9.88 McDermott, J. F.: “Single-Layer Corrugated Steel Sheet
Hypars,” paper 5977, Journal of the Structural Division,
ASCE Proceedings, vol. 94, June 1968.
9.89 Abdel-Sayed, G.: “Clear Span Utility Buildings,” in
Proceedings of the Cold-Formed Steel Structures Confer-
ence, University of Windsor, Ontario, Canada, Apr. 1980.
9.90 Jankowski, W A., and D. R. Sherman: “The Interaction of
Shear Diaphragms and Diagonal Bracing,” in Proceedings
of the 9th International Specialty Conference on Cold-
Formed Steel Structures,W.W.YuandJ.H.Senne,Eds.,
University of Missouri-Rolla, Nov. 1988.
9.91 Heagler, R. B.: “Basic Diaphragm Design,” in Proceedings
of the 1988 National Steel Construction Conference,Amer-
ican Institute of Steel Construction, Chicago, IL, June
1988.
9.92 Luttrell, L. D.: “Shear Diaphragm Strength,” in Proceed-
ings of the 1988 National Steel Construction Conference,
American Institute of Steel Construction, Chicago, IL,
June 1988.
9.93 Tarpy, T. S.: “Shear Resistance of Steel Stud Wall Panels:
A Summary Report,” in Proceedings of the 7th Interna-
tional Specialty Conference on Cold-Formed Steel Struc-
tures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1984.
472 REFERENCES
9.94 Miller, T. H., and T. Pekoz: “Studies on the Behavior of
Cold-Formed Steel Wall Stud Assemblies,” in Proceedings
of the 10th International Specialty Conference on Cold-
Formed Steel Structures, W. W. Yu, and R. A. LaBoube,
Eds., University of Missouri-Rolla, Oct. 1990.
9.95 diGirolamo, E. R., T. Pekoz, and T. Bond: “Development
and Verification of a Structural System Using Cold-Formed
Steel Wall Studs,” Proceedings of the 10th International
Specialty Conference on Cold-Formed Steel Structures, W.
W. Yu and R. A. LaBoube, Eds., University of Missouri-
Rolla, Oct. 1990.
9.96 Caccese, V., M. Elgaaly, and R. Chen: “Experimental
Study of Thin Steel-Plate Shear Walls under Cyclic Load,”
Journal of Structural Engineering, ASCE, vol. 119, no. 2,
Feb. 1993.
9.97 Kian, T., and T. B. Pekoz: “Evaluation of Industry-Type
Bracing Details for Wall Stud Assemblies,” Final Report,
Cornell University, Ithaca, NY, Jan. 1994.
9.98 Miller, T. H., and T. Pekoz: “Unstiffened Strip Approach
for Perforated Wall Studs,” Journal of Structural Engi-
neering, ASCE , vol. 120, no. 2, Feb. 1994.
9.99 Easterling, W S., and M. L. Porter: “Steel-Deck-
Reinforced Concrete Diaphragms, I and II,” Journal of
Structural Engineering, ASCE , vol. 120, no. 2, Feb. 1994.
9.100 Serrette, R., and K. Ogunfunmi: “Shear Resistance of
Gypsum-Sheathed Light-Gauge Steel Stud Walls,” Journal
of Structural Engineering, vol. 122, no. 4, Apr. 1996.
9.101 Smith, H. A., and V. L. Vance: “Model to Incorporate
Architectural Walls in Structural Analysis,” Journal of
Structural Engineering, vol. 122, No. 4, Apr. 1996.
9.102 Elgaaly, M., and Y. Liu: “Analysis of Thin-Steel-Plate
Shear Walls,” Journal of Structural Engineering, vol. 123,
no. 11, Nov. 1997.
9.103 Lucas, R. M, F. G. A. Al-Bermani, and S. Kiti-
pornchai: “Modelling of Cold-Formed Purlin-Sheeting
Systems—Part I: Full Model,” Thin Walled Structures, vol.
27, no. 3, 1997.
9.104 Lucas, R. M., F. G. A. Al-Bermani, and S. Kiti-
pornchai: “Modelling of Cold-Formed Purlin-Sheating
Systems—Part 2: Simplified Model,” Thin-Walled Struc-
tures, vol. 27, no. 3, 1997.
9.105 Elgaaly, M.: “Thin Steel Plate Shear Walls Behavior and
Analysis,” Thin-Walled Structures, vol. 32, 1998.
9.106 Steel Deck Institute: Diaphragm Design Manual , 2nd ed.,
Fox River Grove, IL, 1998.
9.107 Steel Deck Institute: Diaphragm Design Manual , 1st ed.,
Fox River Grove, IL, 1981.
9.108 Miller, T. H., and T. Pekoz: “Behavior of Gypsum-
Sheathed Cold-Formed Steel Walls Studs,” Journal of
Structural Engineering, vol. 120, no. 5, May 1994.
9.109 Center for Cold-Formed Steel Structures, CCFSS Tech-
nical Bulletin, vol. 8, no. 2, Aug. 1999, University of
Missouri-Rolla.
9.110 Lease, A. R., and W. S. Easterling, “Insulation Impact on
Shear Strength of Screw Connections and Shear Strength
of Diaphragms,” Report No. CE/VPI-ST-06/01, Virginia
Polytechnic Institute and State University, Blacksburg, VA,
Jan. 2006.
9.111 Steel Deck Institute: Diaphragm Design Manual , 3rd ed.,
Fox River Grove, IL, 2004.
9.112 Wang, J., Y. S. Tian, T. J. Lu, C. Y. Barlow, and J.
Evans, “Stress/Strain Distributions and Role of Sheathing
in Partition Wall Panels Subjected to Compression,” in
Proceedings of the 16th International Specialty Conference
on Cold-Formed Steel Structures, R. A. LaBoube and W.
W. Yu, Eds., University of Missouri-Rolla, Oct. 2002.
9.113 Schafer, B. W., and B. Hiriyur, “Analysis of Sheathed
Cold-Formed Steel Wall Studs,” in
Proceedings of the 16th
International
Specialty Conference on
Cold-Formed Steel
Structures, R. A. LaBoube and W. W. Yu, Eds., University
of Missouri-Rolla, Oct. 2002.
9.114 American Iron and Steel Institute, Cantilever Test Method
Cold-Formed Steel Diaphragms, AISI S907-08, Wash-
ington, DC, 2008.
9.115 Metal Construction Association, A Primer on Diaphragm
Design, 1st ed., Chicago, IL, 2004.
9.116 Canadian Sheet Steel Building Institute, Design of Steel
Deck Diaphragms, 3rd ed., Cambridge, Ontario, Canada,
2006.
9.117 Sears, J. M., and T. M. Murray, “Proposed Method for the
Prediction of Lateral Restraint Forces in Metal Building
Roof Systems,” in Annual Stability Conference Proceed-
ings, Structural Stability Research Council, Rolla, MO,
2007.
9.118 Seek, M. W., and T. M. Murray, “Computer Modeling of
Sloped Z-Purlin Supported Roof Systems to Predict Lateral
Restraint Force Requirements,” in Proceedings of the 17th
International Specialty Conference on Cold-Formed Steel
Structures, R. A. LaBoube and W. W. Yu, Eds., University
of Missouri-Rolla, Oct. 2004.
9.119 Seek, M. W., and T. M. Murray, “Component Stiff-
ness Method to Predict Lateral Restraint Forces in
End Restrainted Single Span Z-Section Supported Roof
Systems with One Flange Attached to Sheathing,” in
Proceedings of the 19th International Specialty Confer-
ence on Cold-Formed Steel Structures, R. A. LaBoube
and W. W. Yu, Eds., University of Missouri-Rolla, Oct.
2006.
9.120 Seek, M. W. and T. M. Murray, “Lateral Brace Forces
in Single Span Z-Section Roof Systems with Inte-
rior Restraints Using the Component Stiffness Method,”
in Annual Stability Conference Proceedings, Structural
Stability Research Council, Rolla, MO, 2007.
9.121 Neubert, M. C., and T. M. Murray, “Estimation of
Restraint Forces for Z-Purlin Roofs under Gravity Loads,”
in Proceedings of the 15th International Specialty Confer-
ence on Cold-Formed Steel Structures, R. A. LaBoube,
and W. W. Yu, Eds., University of Missouri-Rolla, Oct.
2000.
9.122 Sears, J., M. Seek, and T. M. Murray, “Design Guide
for Cold-Formed Steel Roof Framing Systems,” American
Iron and Steel Institute, Washington, DC, 2009.
REFERENCES 473
CHAPTER 10
10.1 Rockey, K. C., and H. R. Evans: “The Behaviour of
Corrugated Flooring Systems,” in Thin-Walled Structures,
Gordon and Breach Science Publishers, New York, 1968.
10.2 Macomber Inc.: “The Panlweb Girder,” Canton, OH.
10.3 Sherman, D., and J. Fisher: “Beams with Corrugated
Webs,” in Proceedings of the 1st Specialty Conference on
Cold-Formed Steel Structures,W.W.Yu,Ed.,University
of Missouri-Rolla, Aug. 1971.
10.4 Harrison, J. D.: “Exploratory Fatigue Tests of Two Girders
with Corrugated Webs,” British Welding Journal,Mar.
1965.
10.5 Blodgett, H. B.: “Moment of Inertia of Corrugated Sheets,”
Civil Engineering, vol. 4, Sept. 1934, pp. 492–493.
10.6 Wolford, D. S.: “Sectional Properties of Corrugated Sheets
Determined by Formula,” Civil Engineering, vol. 24, Feb.
1954, pp. 103–104.
10.7 Bethlehem Steel Corporation: “Bethlehem Bridge
Flooring,” Booklet 3324A, Bethlehem, PA, 1979.
10.8 Armco Inc.: “Armco Bridge Plank,” Catalog BP-8479,
Middletown, OH, 1979.
10.9 United Steel Fabricators: “USF Structural Plate Bridge
Flooring,” Folder BF1, Sidney, OH, 1981.
10.10 Wheeling Corrugating Company: “Wheeling Bridge
Forms,” WC-357, Wheeling, WV.
10.11 Cary, R. L.: “Inelastic Flexural Stability of Corrugations,”
in Proceedings of the 8th International Specialty Confer-
ence on Cold-Formed Steel Structures,W.W.YuandJ.
H. Senne, Eds., University of Missouri-Rolla, Nov. 1986.
10.12 Rauch, A. F., S. M. Sargand, and G. A. Hazan: “Behavior
of Deeply Corrugated Steel Plate in Culvert,” Journal of
Structural Engineering, ASCE, vol. 120, no. 5, May 1994.
10.13 Luo, R., and B. Edlund: “Buckling Analysis of Trape-
zoidally Corrugated Panels Using Spline Strip Method,”
Thin-Walled Structures, vol. 18, 1994.
10.14 Lee, C. L., A. Mioduchowski, and M. G. Faulkner: “Opti-
mization of Corrugated Claddings,” Journal of Structural
Engineering, ASCE , vol. 121, no. 8, Aug. 1995.
10.15 Elgaaly, M., R. W. Hamilton, and A. Seshadri: “Shear
Strength of Beams with Corrugated Web,” Journal of
Structural Engineering, ASCE, vol. 122, no. 4, Apr. 1996.
10.16 Elgaaly, M., A. Seshadri, and R. W. Hamilton: “Bending
Strength of Steel Beams with Corrugated Webs,” Journal
of Structural Engineering, vol. 123, no. 6, June 1997.
10.17 Elgaaly, M., and A. Seshadri: “Girders with Corrugated
Webs under Partial Compressive Edge Loading,” Journal
of Structural Engineering, vol. 123, no. 6, June 1997.
10.18 Luo, R., and B. Edlund: “Ultimate Strength of Girders with
Trapezoidally Corrugated Webs under Patch Loading,”
Thin-Walled Structures, vol. 24, 1996.
10.19 Vora, H., and C. Yu: “Pilot Research on Cold-Formed Steel
Framed Shear Wall Assemblies with Corrugated Sheet
Steel Sheathing,” in Proceedings of the 19th International
Specialty Conference on Cold-Formed Steel Structures, R.
A. LaBoube and W. W. Yu, Eds., Missouri University of
Science and Technology, Rolla, MO, 2008.
10.20 Stojadinovic, B., and S. Tipping: “Structural Testing of
Corrugated Sheet Steel Shear Walls,” in Proceedings of the
19th International Specialty Conference on Cold-Formed
Steel Structures, R. A. LaBoube, and W. W. Yu, Eds.,
Missouri University of Science and Technology, Rolla,
MO, 2008.
10.21 Egilmez, O. Ozgur, A. Jetann, and T. A. Helwig: “Bracing
Behavior of Permanent Metal Deck Forms,” in Proceed-
ings of the Annual Technical Session and Meeting, Struc-
tural Stability Research Council, Rolla, MO, 2003.
10.22 Egilmez, O., O. Ozgur, T. A. Helwig, C. A. Jetann., and
R.
Lowery: “Sti
ffness and Strength of Metal Bridge Deck
Forms,” Journal of Bridge Engineering, vol. 12, no. 4,
July/Aug. 2007.
10.23 Pignataro, M., M. Pasca, and P. Franchin: “Post Buckling
Analysis of Corrugated Panels in the Presence of Multiple
Interacting Modes,” Thin-Walled Structures, vol. 36, no.
1, Jan. 2000.
10.24 Tain, Y. S., and T. J. Lu: “Optimal Design of Compression
Corrugated Panels,” Thin-Walled Structures, vol. 43, no. 3,
Mar. 2005.
10.25 Ibrahim, S. A., W. W. El-Dakhakhni, and M. Elgaaly:
“Fatigue of Corrugated-Web Plate Girders: Experimental
Study,” Journal of Structural Engineering, ASCE , vol.
132, no. 9, Sept. 2006.
10.26 D-MAC Industries, Inc.: “Stay-in-Place Steel Bridge
Forms,” Alpharetta, GA.
10.27 Wheeling Corrugating Company: “Wheeling Bridge
Deck—Reference Manual,” Wheeling, W.V.
10.28 CMC Joist and Deck: “United Steel Deck Bridge Form
Manual, #100d-2000,” Murray Hill, NJ.
10.29 Consolidated Systems, Inc.: “Bridge Deck,” Columbia,
SC.
CHAPTER 11
11.1 Blodgett, O. W.: “Design of Welded Structures,” The
James F. Lincoln Arc Wielding Foundation, Cleveland,
OH, 1966, Sec. 4.8.
11.2 Robertson, H. H.: “Robertson Q-Lock Floor,” Pittsburgh,
PA, 1966.
11.3 Inland-Ryerson: “Hi-Bond Composite Beam Design for
Buildings,” Catalog 2715M, Chicago, IL, Nov. 1968.
11.4 Wheeling Corrugating Company: “Composite Floor
Deck,” Wheeling, WV, 1970.
11.5 Granco Steel Products Company: “Floor, Roof Construc-
tion,” Catalog 99–10, St. Louis, MO, Jan. 1972.
11.6 Porter, M. L., and C. E. Ekberg: “Design Recommenda-
tions for Steel Deck Floor Slabs,” in Proceedings of the 3rd
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1975.
11.7 Porter, M. L., and C. E. Ekberg: “Design vs Test Results
for Steel Deck Floor Slabs,” in Proceedings of the 3rd
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1975.
474 REFERENCES
11.8 Porter, M. L., C. E. Ekberg, L. F. Greimann, and H. A.
Elleby: “Shear-Bond Analysis of Steel-Deck-Reinforced
Slabs,” Journal of the Structural Division, ASCE Proceed-
ings, vol. 102, Dec. 1976.
11.9 Porter, M. L., and C. E. Ekberg: “Behavior of Steel-
Deck-Reinforced Slabs,” Journal of the Structural Divi-
sion, ASCE Proceedings, vol. 103, Mar. 1977.
11.10 Porter, M. L.: “Effects of Added Reinforcement in Steel-
Deck Slabs,” in Proceedings of the 4th International
Specialty Conference on Cold-Formed Steel Structures,W.
W. Yu and J. H. Senne, Eds., University of Missouri-Rolla,
June 1978.
11.11 Porter, M. L., and C. E. Ekberg: “Coating Effects of
Cold-Formed Steel Deck Slabs,” in Proceedings of the 5th
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1980.
11.12 Porter, M. L., and L. F. Greimann: “Composite Steel
Deck Diaphragm Slabs—Design Modes,” in Proceedings
of the 6th International Specialty Conference on Cold-
Formed Steel Structures,W.W.YuandJ.H.Senne,Eds.,
University of Missouri-Rolla, Nov. 1982.
11.13 Temple, M. C., and G. Abdel-Sayed: “Fatigue Experiments
on Composite Slab Floors,” in Proceedings of the 4th
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, June 1978.
11.14 Schuster, R. M.: “Composite Steel Deck Concrete Floor
Slabs,” in Proceedings of the Cold-Formed Steel Structures
Conference, University of Windsor, Ontario, Canada, Apr.
1980.
11.15 Schuster, R. M., and W C. Ling: “Mechanical Interlocking
Capacity of Composite Slabs,” in Proceedings of the 5th
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1980.
11.16 Seleim,S.S.,andR.M.Schuster: “Shear-Bond Capacity
of Composite Slabs,” in Proceedings of the 6th Interna-
tional Specialty Conference on Cold-Formed Steel Struc-
tures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1982.
11.17 Abdel-Sayed, G.: “Composite Cold-Formed Steel-
Concrete Structural System,” in Proceedings of the 6th
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and J. H. Senne, Eds., University
of Missouri-Rolla, Nov. 1982.
11.18 Steel Deck Institute: “Design Manual for Composite
Decks, Form Decks and Roof Decks,” Fox River Grove,
IL, 1981–1982.
11.19 McCabe, T. J.: “Design Example on Composite Steel
Deck Floor Slabs,” in Proceedings of the 3rd International
Specialty Conference on Cold-Formed Steel Structures,W.
W. Yu and J. H. Senne, Eds., University of Missouri-Rolla,
Nov. 1975.
11.20 Fisher, J. M., and D. R. Buettner: “Applications of Light-
Gauge Steel in Composite Construction,” in Handbook of
Composite Construction Engineering,G.M.Sabnis,Ed.,
Van Nostrand Reinhold, New York, 1979, Chap. 3.
11.21 Grant, J. A., J. W. Fisher, and R. G. Slutter: “Composite
Beams with Formed Steel Deck,” Engineering Journal,
American Institute of Steel Construction, First Quarter
1977.
11.22 Winter, G.: “Discussion of Design of Composite Beams
with Formed Metal Deck, by J. W. Fisher,” AISC Engi-
neering Journal, vol. 8, Jan. 1971.
11.23 Nicholas J. Bouras, Inc.: “Engineers Notebook for the
Design of Composite Beams and Girders with Steel Deck,”
Aug. 1985.
11.24 Inryco: “Inryco Composite Beam Design,” Manual 21-12,
Chicago,
IL, July 1977.
11.25
Mac-Fab Products Inc.: “Floor & Roof Systems,” St.
Louis, MO, Jan. 1978.
11.26 Canadian Sheet Steel Building Institute: “Criteria for the
Design of Composite Slabs,” CSSBI S3-88, Cambridge,
Ontario, Canada, Nov. 1988.
11.27 Badoux, J. C., and M. Crisinel: “Recommendations for the
Application of Cold-Formed Steel Decking for Composite
Slabs in Buildings,” Swiss Institute of Steel Construction,
Zurich, 1973.
11.28 Bucheli, P., and M. Crisinel: “Poutres Mixtes dans le
Bˆatiment,” Swiss Institute of Steel Construction, 1982.
11.29 Cran, J. A.: “Design and Testing—Composite Open Web
Steel Joists,” in Proceedings of the 1st Specialty Confer-
ence on Cold-Formed Steel Structures,W.W.Yu,Ed.,
University of Missouri-Rolla, Aug. 1971.
11.30 Tide, R. H. R., and T. V. Galambos: “Composite Open
Web Steel Joists,” AISC Engineering Journal, Jan. 1970.
11.31 Porter, M. L., and L. F. Greimann: “Shear-Bond Strength
of Studded Steel Deck Slabs,” in Proceedings of the 7th
International Specialty Conference on Cold-Formed Steel
Structures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1984.
11.32 Luttrell, L. D., and S. Prasannan: “Strength Formulations
for Composite Slabs,” in Proceedings of the 5th Interna-
tional Specialty Conference on Cold-Formed Steel Struc-
tures, W. W. Yu and J. H. Senne, Eds., University of
Missouri-Rolla, Nov. 1984.
11.33 Luttrell, L. D.: “Methods for Predicting Strength in
Composite Slabs,” in Proceedings of the 8th International
Specialty Conference on Cold-Formed Steel Structures,W.
W. Yu and J. H. Senne, Eds., University of Missouri-Rolla,
Nov. 1986.
11.34 Porter, M. L.: “Highlights of New ASCE Standard on
Composite Slabs,” in Proceedings of the 8th International
Specialty Conference on Cold-Formed Steel Structures,W.
W. Yu and J. H. Senne, Eds., University of Missouri-Rolla,
Nov. 1986.
11.35 Schuster, R. M., and R. E. Suleiman: “Composite Slabs
Subjected to Repeated Point Loading,” in Proceedings
of the 8th International Specialty Conference on Cold-
Formed Steel Structures,W.W.YuandJ.H.Senne,Eds.,
University of Missouri-Rolla, Nov. 1986.