Стандарт
  • формат pdf
  • размер 1.18 МБ
  • добавлен 03 декабря 2011 г.
API Spec Q1 Specification for Quality Programs for the Petroleum and Natural Gas Industry
20 cтр.
API SPECIFICATION Q1
SIXTH EDITION, MARCH 1, 1999
EFFECTIVE DATE: SEPTEMBER 1, 1999
API Specification Ql provides requirements for a quality system that may be applied on an inteational basis to facilitate the consistent and reliable manufacture of products to specifications prepared for the oil and gas industry. Part One of this Standard is aligned with ANSI/ISO/ASQC Q9001- 1994, Quality Systems—Model for Quality Assurance in Design, Development, Production, Installation and Servicing. Content of API Spec Q1 not found in ANSI Q900I-1994 is shown in italics.
When used by API licensees in conjunction with the requirements of the API License Agreement, Part Two of this specification is required (normative).
Notes in this standard are for information and do not contain requirements.
Смотрите также

Сборник стандартов Американского института нефти - API

Стандарт
  • формат pdf, doc, txt
  • размер 90.18 МБ
  • добавлен 26 октября 2010 г.
API Spec 5L-04 Specification for Line Pipe API Spec 5CT Specification for Casing and Tubing API 6A / ISO 10423 Specification 6A API Spec 6D:2002 Арматура трубопроводная промышленная. Спецификация API API Spec 6FA:1999 Спецификация на испытание арматуры на пожаростойкость API Spec 6FD:1995 Спецификация на испытание обратной арматуры на пожаростойкость API RP 521:1997 Guide for Pressure –Reliving and Depressuring Systems Практические рекоменд...

ANSI/API Std 610 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries

Стандарт
  • формат pdf
  • размер 3.11 МБ
  • добавлен 08 декабря 2011 г.
220 стр. ELEVENTH EDITION, SEPTEMBER 2010 ERRATA, JULY 2011 ISO 13709:2009 (Identical), Centrifugal pumps for petroleum, petrochemical and natural gas industries This International Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This International Standard is applicable to overhung pumps, between-b...

API Spec 16A-1997 Specification for Drill Through Equipment

Стандарт
  • формат pdf
  • размер 5.97 МБ
  • добавлен 13 декабря 2011 г.
67 стр. American Petroleum Institute, Second Edition, December, 1997 This specification is formulated to provide for the availability of safe and functionally interchangeable drill through equipment utilized for drilling for oil and gas. Technical content provides requirements for performance, design, materials, tests and inspection, welding, marking, handling, storing, and shipping. This specification does not apply to field use or field testing...

API Spec 16С-1993 Specification for Choke and Kill Systems

Стандарт
  • формат pdf
  • размер 3.94 МБ
  • добавлен 13 декабря 2011 г.
63 стр. American Petroleum Institute, First Edition, Januaru, 1993 This specification was formulated to provide for safe and functionally interchangeable surface and eubsea choke and kill systems equipment utilized for drilling oil and gas wells. Other parts of the Choke and ЮН System not specifically addressed in this document shall be in accordance with the applicable sections of this specification. Technical content provides the minimum requir...

API Spec Q1: 2007 Specification for Quality Programs for the Petroleum and Natural Gas Industry

Стандарт
  • формат pdf
  • размер 1.92 МБ
  • добавлен 04 декабря 2011 г.
46 стр. ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-government...

API Specification 6A Specification for Wellhead and Christmas Tree Equipment

Стандарт
  • формат pdf
  • размер 4.7 МБ
  • добавлен 04 декабря 2011 г.
415 стр. EFFECTIVE DATE: FEBRUARY 1, 2005 ANSI/API 6A/ISO 10423-2003 This International Standard is based on API Spec 6A, seventeenth edition, February 1996, its errata and supplement, and API Spec 6AV1, first edition, February 1996. The contents of API Spec 14D (upon which ISO 10433 was based) and API Recommended Practice 14H (upon which ISO 10419 was based) have been incorporated in API Spec 6A, seventeenth edition. The International System of...

API Std 610 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries

Стандарт
  • формат pdf
  • размер 6.99 МБ
  • добавлен 19 ноября 2011 г.
American Petroleum Institute / 01-Sep-2010 / 220 pages. Edition: 11th. Eleventh Edition (ISO 13709:2009 Identical Adoption). Scope. This International Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This International Standard is applicable to overhung pumps, between-bearings pumps and vertically s...

API Std 610: 2010 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries

Стандарт
  • формат pdf
  • размер 3.11 МБ
  • добавлен 03 декабря 2011 г.
220 стр. ANSI/API STANDARD 610 ELEVENTH EDITION, SEPTEMBER 2010 ERRATA, JULY 2011 ISO 13709:2009 (Identical), Centrifugal pumps for petroleum, petrochemical and natural gas industries This International Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This International Standard is applicable to ove...

API Std 618-1995 Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services

Стандарт
  • формат pdf
  • размер 9.21 МБ
  • добавлен 03 декабря 2011 г.
167 стр. API STANDARD 618 FOURTH EDITION, JUNE 1995 This standard covers the minimum requirements for reciprocating compressors and their drivers used in petroleum, chemical, and gas industry services for handling process air or gas with either lubricated or nonlubricated cylinders. Compressors covered by this standard are of mod- erate-to-low speed and in critical services. Also covered are related lubricating systems, controls, instrumentation,...