API Std 653-2009 Tank Inspection, Repair, Alteration, and Reconstruction

American Petroleum Institute (API) First Edition, March 2001. 99p. This Recommended Practice (RP) provides guidelines for design, fabrication, installation, inspection and operation of Floating Production Systems (FPSs).

American Petroleum Institute (API) First Edition, March 2002. 99p. This Recommended Practice (RP) provides guidelines for design, fabrication, installation, inspection and operation of Floating Production Systems (FPSs). The basic function of a FPS is to receive hydrocarbons from the wellhead, process the hydrocarbons, and store and/or ofЯoad the product to a shuttle tanker or convey it to a pipeline system

American Petroleum Instltute (API) Second Edition, September 2008. 654p. This publication provides quantitative procedures to establish an inspection program using risk-based methods for pressurized fixed equipment, including pressure vessel, piping, tankage, pressure relief devices, and heat exchanger tube bundles. This document is to be used in conjunction with API 580, which provides guidance on developing a riskbased inspection program for fi...

American Petroleum Institute (API) Fifth Edition, June 2001. 30p. The following definitions are applicable to underground tank lining and inspection as described in this standard.

American Petroleum Instltute (API) Eighth Edition, May 1995. 34p. This standard covers the design, construction, and location of liqueЮed petroleum gas (LPG) installations at marine and pipeline terminals, natural gas processing plants, reЮneries, petrochemical plants, or tank farms.

American Petroleum Instltute (API) Ninth Edition, June 2006. 20p. This inspection code covers the in-service inspection, repair, alteration, and rerating activities for pressure vessels and the pressure-relieving devices protecting these vessels.

This standard American Welding Society (AWS). 2006. 72p. This code provides qualification, workmanship, and inspection requirements for both arc welding (Part A) and braze welding (Part B), as they apply to the fabrication, manufacture, and erection of nonstructural sheet metal components and systems.

This standard American Welding Society (AWS). 2009. 18p. This specification establishes the requirements for certification and maintenance of certification in accordance with qualification requirements stated in AWS B5.14, Specification for the Qualification of Welding Sales Representatives.

This standard American Welding Society (AWS). 2007. 24p. This standard establishes the requirements for AWS certification of welding inspection personnel. It describes how personnel are certified, and the principles of conduct and practice by which certification may be maintained