19. W. Loven, Pretreatments for aluminium, Literature Review (Dutch), Division of
Corrosion Technology, Delft University of Technology, 1992.
20. T. Van der Klis, Vademecum—Surface Techniques for Metals, 5th ed., Bilthoven,
The Netherlands, 1989.
21. D. B. Freeman, Phosphating and Metal Pretreatment, Woodhead, Cambridge,
1986.
22. Tool and Manufacturing Engineers Handbook, Vol. 3, Materials, Finishing and
Coating, 3rd ed. Society of Manufacturing Engineers, Dearborn, MI, 1985.
23. G. M. Brown, K. Shimizu, G. E. Kobayashi, et al., The growth of chromate
conversion coatings on high purity aluminum, Corros. Sci. 34:1045–1054 (1993).
24. M. W. Kendig, A. J. Davenport, and H. S. Isaacs. The mechanism of corrosion
inhibition by chromate conversion coatings from X-ray absorption near edge
spectroscopy (XANES), Corros. Sci. 34:41–49 (1993).
25. A. H. Reed, For performance and economy: chromate coatings, Prod. Finish.
51:60–64 (1986).
26. M. Koudelkova, J. Augustynski, and H. Berthou, On the composition of the passivat-
ing films formed on aluminum in chromate solutions, J. Electrochem. Soc.
124:1165–1168 (1977).
27. H. Leidheiser, Mechanism of corrosion inhibition with special attention to
inhibitors in organic coatings, J. Coat. Technol. 53:29 (1981).
28. 2262. Toxicological Profile for Chromium (Public Health Service Report ATSDR/
TP-88/10), Agency for Toxic Substances, Atlanta, 1989.
29. B. R. W. Hinton, Corrosion prevention and chromates: the end of an era?
Proceedings Asia Interfinish ’90 (paper 30), Singapore, 1990.
30. D. G. Anderson, E. J. Murphy, and J. Tuccir, J. Coat. Technol. 50:38 (1978).
31. W. J. van Ooij, Polym. Mater. Sci. Eng. 53:698 (1985).
32. E. N. Soepenberg, H. G. Vreijberg, J. A. F. M. S. van Westrum, W. J. van Ooij, and
O. T. de Vries, Corrosion/85, NACE, Houston, paper 388, 1991.
33. F. Delaunois, V. Paulaini, and J. P. Petjtjean, Mater. Sci. Forum 142:213 (1997).
34. R. Mady, C. Reis, and R. Morlock, Eur. Pat. Appl. 831126107, 1993.
35. B. A. Shaw, G. D. Davis, T. L. Friz, and K. A. Olver, J. Electrochem. Soc. 137:359
(1990).
36. B. Hinton, A. Hughes, R. Taylor, M. Anderson, K. Nelson, and L. Wilson, International
Symposium on Aluminium Surface Science and Technology, Antwerp, Belgium, May
12–15, 1997, p. 165.
37. F. Mansfeld, Y. Wang, and H. Shih, Electrochim. Acta 37:2277 (1992).
38. L. Fedrizzi, F. Florian, and S. Rossi, International Symposium on Aluminium
Surface Science and Technology, Antwerp, Belgium, May 12–15, 1997, p. 243.
39. M. J. Rijkhoff, R. Bleeker, and J. Bottema, International Symposium on Aluminium
Surface Science and Technology, Antwerp, Belgium, May 12–15, 1997, p. 125.
40. C. M. Rangel and M. A. Travassos, Corros. Sci. 33:327 (1992).
41. J. W. Bibber, Corros. Rev. 15:303 (1997).
42. R. Feser and Th. Schmidt-hansberg, Eurocorr ’97, Trondhiem. Norway, September
22–25, 1997, p. 291.
43. W. van Ooij, Corrosion 54:204–215 (1998).
44. W. J. van Ooij and T. J. Ossic, SAE International Congress and Exposition, paper
870647, 1987.
45. C. Barreau, D. Massinon, and D. Thierry, Proceedings, 5th Automotive Corrosion
and Prevention Conference, SAE, paper 327, 1991.
46. D. Massinon and D. Thierry, Corrosion/91, NACE, Houston, paper 574, 1991.
47. R. D. Granata, Corrosion/91, NACE, Houston, paper 382, 1991.
48. J. H. W. de Wit, E. P. M. van Westing, and D. H. van der Weijde, Mater. Sci. Forum
247:69 (1997).
726 de Wit et al.
Copyright © 2002 Marcel Dekker, Inc.