This European Standard was approved by CEN on 14 October 2004. 26p.
This document applies to welding consumables for which
supplementary qualification is required. It contains the technical
requirements to be fulfilled.
BS EN 14532-2: 2004 Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys (Eng)
Стандарт
- формат pdf
- размер 450.05 КБ
- добавлен 25 января 2012 г.
Похожие разделы
Смотрите также
AWS A5.01M/A5.01: 2008 Procurement Guidelines for Consumables-Welding and Allied Processes-Flux and Gas Shielded Electrical Welding Processes / Стандарт американского сварочного общества (ENG)
Стандарт- формат pdf
- размер 251.5 КБ
- добавлен 03 декабря 2011 г.
Approved by the American National Standards Institute April 4, 2008, 40 p. This standard is a tool for communication between a purchaser and a supplier of welding consumables within quality systems as might, for example, be based upon ISO 9001. This standard, together with an AWS, ISO, or other recognized welding consumable standard, provides a method for preparing those specific details needed for welding consumable procurement which consist o...
AWS A5.11/A5.11M-97/ASME SFA-5.11 Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding (Eng)
Стандарт- формат pdf
- размер 2.74 МБ
- добавлен 10 января 2012 г.
This standard American Welding Society (AWS). 1997. 32p. This specification prescribes requirements for the classification of nickel and nickel-alloy covered electrodes for shielded metal arc welding. It includes those compositions in which the nickel content exceeds that of any other element.
AWS A5.14/A5.14M-97/ASME SFA-5.14 Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods (Eng)
Стандарт- формат pdf
- размер 458.64 КБ
- добавлен 10 января 2012 г.
This standard American Welding Society (AWS). 1997. 19p. This specification prescribes requirements for the classification of bare nickel and nickel-alloy welding electrodes, strip electrodes, and welding rods. It includes those compositions where the nickel content exceeds that of any other element.
BS EN 14532-1: 2004 Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys (Eng)
Стандарт- формат pdf
- размер 599.96 КБ
- добавлен 25 января 2012 г.
This European Standard was approved by CEN on 14 October 2004. 44p. This document describes the basic verification tests, the testing methods, the amount of testing and the requirements for the qualification of welding consumables for steel, nickel and nickel alloys intended for all fields of application.
BS EN 14532-3: 2004 Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys (Eng)
Стандарт- формат pdf
- размер 431.74 КБ
- добавлен 25 января 2012 г.
This European Standard was approved by CEN on 14 October 2004. 32p. This document describes the basic verification tests, the testing methods, the amount of testing and the requirements for the qualification of wire electrodes, wires and rods for welding of aluminium.
BS EN 760: 1996 Welding consumables - Fluxes for submerged arc welding - Classification (Eng)
Стандарт- формат pdf
- размер 127.71 КБ
- добавлен 04 января 2012 г.
This European Standard was approved by CEN on 1996-02-12. 14p. This standard applies to fluxes for the submerged arc welding of non-alloyed, low alloy and high alloy steels such as stainless and heat resisting steels and of nickel and nickel alloys using wire electrodes and strip electrodes.
BS EN ISO 5817: 2007 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817: 2003, corrected version: 2005, including Technical CCorrigendum 1: 2006) (Eng)
Стандарт- формат pdf
- размер 756.41 КБ
- добавлен 19 декабря 2011 г.
This Standard was approved by CEN on 18 July 2007. 36p. This International Standard provides quality levels of imperfections in fusion-welded joints (except for beam welding) in all types of steel, nickel, titanium and their alloys. It applies to material thickness above 0,5 mm. It covers fully penetrated butt welds and all fillet welds. The priciples of this International Standard may also be applied to partial-penetration butt welds.
John C. Lippold, Samuel D. Kiser, John N. DuPont. Welding Metallurgy and Weldability of Nickel-Base Alloys (на английский язык)
- формат pdf
- размер 6.97 МБ
- добавлен 18 февраля 2011 г.
Published by John Wiley & Sons, Inc. , Hoboken, New Jersey, 2009, 440 pages Английский язык Welding Metallurgy and Weldability of Nickel-Base Alloys describes the fundamental metallurgical principles that control the microstructure and properties of welded Ni-base alloys. It serves as a practical how-to guide that enables engineers to select the proper alloys, filler metals, heat treatments, and welding conditions to ensure that failures ar...