Стандарты Британии (BS)
Стандарт
  • формат pdf
  • размер 279.97 КБ
  • добавлен 03 декабря 2011 г.
BS EN 288-5: 1995 Specification and approval of welding procedures for metallic materials - Part 5 - Approval by using approved welding consumables for arc welding
This European Standard was approved by CEN on 1994-08-17. 12 р.

This standard simplifies the approval of welding procedures especially for repetitive operations.
Похожие разделы
Смотрите также

AWS A5.01M/A5.01: 2008 Procurement Guidelines for Consumables-Welding and Allied Processes-Flux and Gas Shielded Electrical Welding Processes / Стандарт американского сварочного общества (ENG)

Стандарт
  • формат pdf
  • размер 251.5 КБ
  • добавлен 03 декабря 2011 г.
Approved by the American National Standards Institute April 4, 2008, 40 p. This standard is a tool for communication between a purchaser and a supplier of welding consumables within quality systems as might, for example, be based upon ISO 9001. This standard, together with an AWS, ISO, or other recognized welding consumable standard, provides a method for preparing those specific details needed for welding consumable procurement which consist o...

AWS B5.17: 2004 Specification for the Qualification of Welding Fabricators (Eng)

Стандарт
  • формат pdf
  • размер 236.15 КБ
  • добавлен 12 января 2012 г.
This standard American Welding Society (AWS). 2004. 18p. This specification establishes the minimum requirements for the Welding Quality Program for Welding Fabricators (WF). This specification is intended to be used by companies regardless of the welding processes or materials used.

BS EN 1011-1: 1998+A1: 2002+A2: 2003 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding (Eng)

Стандарт
  • формат pdf
  • размер 388.56 КБ
  • добавлен 18 декабря 2011 г.
This European Standard was approved by CEN on 26 January 1998 and amendment A1 was approved by CEN on 1 April 2002; amendment A2 was approved by CEN on 30 November 2003. 16p. This European Standard gives general guidance for fusion welding of metallic materials in all forms of product (e.g. cast, wrought, extruded, forged). The processes and techniques referred to in this part of EN 1011 may not all be applicable to all materials. Additional info...

BS EN 1011-5: 2003 Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel (Eng)

Стандарт
  • формат pdf
  • размер 163.22 КБ
  • добавлен 18 декабря 2011 г.
This European Standard was approved by CEN on 28 February 2003. 14p. This European Standard gives general recommendations for welding of clad steels by means of appropriate arc welding processes and electroslag strip cladding. It is generally applicable to all clad steels and is appropriate regardless of the type of fabrication involved, although the application standard may have additional requirements. Non-ferrous claddings, such as titanium, t...

BS EN 1011-6: 2005 Welding - Recommendations for welding of metallic materials - Part 6: Laser beam welding (Eng)

Стандарт
  • формат pdf
  • размер 623.63 КБ
  • добавлен 18 декабря 2011 г.
This European Standard was approved by CEN on 28 November 2005. 44p. This European Standard gives general quidance fir laser beam welding and associated processes of metallic materials inallforms of product (e.g. cast, wrought, extruded, forged).

BS EN 1011-7: 2004 Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding (Eng)

Стандарт
  • формат pdf
  • размер 783.34 КБ
  • добавлен 18 декабря 2011 г.
This European Standard was approved by CEN on 30 April 2004. 44p. This document may be used for the electron beam welding (process no. 51 according to EN ISO 4063) of weldable metallic materials according to CR ISO 15608. It does not contain data on permissible stresses on weld seams or on the testing and evaluation of weld seams. Such data can either be seen from the relevant application standards or should be separately agreed between the contr...

BS EN 288-1-1992+A1: 1997 Specification and approval of welding procedures for metallic materials - Part 1 - General rules for fusion welding

Стандарт
  • формат pdf
  • размер 107.57 КБ
  • добавлен 03 декабря 2011 г.
This European Standard was approved by CEN on 1992-02-21. Amendment A1 was approved on 1996-12-11. 14 р. This standard defines general rules for the specification and approval of welding procedures for metallic materials. This standard also refers to several other standards as regards detailed rules for specific applications.

BS EN 288-4: 1992+A1: 1997 Specification and approval of welding procedures for metallic materials - Part 4 - Welding procedure tests for the arc welding of aluminium and its alloys

Стандарт
  • формат pdf
  • размер 304.5 КБ
  • добавлен 03 декабря 2011 г.
This European Standard was approved by CEN on 5 August 1992. Amendment A1 was approved on 1996-12-11. 30 р. This standard specifies how a welding procedure specification is approved by welding procedure tests.

BS EN 288-7: 1995 Specification and approval of welding procedures for metallic materials - Part 7 - Approval by a standard welding procedure for arc welding

Стандарт
  • формат pdf
  • размер 223.98 КБ
  • добавлен 03 декабря 2011 г.
This European Standard was approved by CEN on 1995-04-07. 10 р. This standard defines the conditions for the approval of a standard welding procedure and establishes the conditions, limits and ranges of approval necessary for the use of standard welding procedures.