Nisbett E.G. Steel Forgings: Design, Production, Selection, Testing and Application

Ковка и объемная штамповка

формат pdf
размер 22.17 МБ
добавлен 30 декабря 2011 г.

Nisbett E.G. Steel Forgings: Design, Production, Selection, Testing and Application

ASTM Inteational, 2005, 132 pages

ASTM Stock No. MNl53 (Manual 53)

Manual 53 is a comprehensive, in-depth publication that covers the full range and scope of steel forgings. Manual 53 is both a practical and vital resource for design engineers; purchasing managers; manufacturers of pressure vessels, turbines, and generators; metallurgical engineers; university professors, and lawyers.

Introduction: Why Steel Forgings?
Why Use Forgings?
Effect of Steel Making
Forging Ingots
Types of Forging
Heating for Forging
Post Forge Practices
Machining
Heat Treatment
Mechanical Testing
Nondestructive Examination
Surface Treatment
Manufacturing Problems and Defects
A Word about ASTM Inteational. Committee AD1 on Steel, Stainless Steel and Related Alloys, and General Requirement Specifications for Forgings
Steel Forgings for the Fittings Industry
Forg ing Re lated Test Methods
Steel Forgings for the Pressure Vessel Industry
Steel Forgings for Turbines and Generators
Steel Forgings for General Industry
The Role of the Purchaser
Forging Failure Analysis
Postscript

Смотрите также

Abe Fujio, Kern Torsten-Ulf, Viswanathan R. Creep resistant steels

формат pdf
размер 6.82 МБ
добавлен 17 декабря 2011 г.

Published in North America by CRC Press LLC, 6000 Broken Sound Parkway, NW, Suite 300, Boca Raton, FL 33487, USA First published 2008, Woodhead Publishing Limited and CRC Press LLC 678 pages Woodhead Publishing ISBN 978-1-84569-178-3 (book) Woodhead Publishing ISBN 978-1-84569-401-2 (e-book) CRC Press ISBN 978-1-4200-7088-0 CRC Press order number: WP7088 General Introduction The development of creep-resistant steels Specifications for creep-res...

Beswick J.M. Bearing Steel Technology, ASTM STP 1419

формат pdf
размер 12.13 МБ
добавлен 15 января 2012 г.

ASTM International, 2002, 0803128940, 533 pages Astm Special Technical Publication Forty-two peer-reviewed papers provide the latest global information on bearing steel manufacture and service life endurance along with an up-to-date perspective on rolling bearing steel technologies. Papers cover: Bearing Steel Process Developments; Steel Technology and Bearing Component Manufacture; Developments in Bearing Steel quality Assessment and Cor...

Kinsey B., Wu X. Tailor Welded Blanks for Advanced Manufacturing

формат pdf
размер 12.26 МБ
добавлен 28 декабря 2011 г.

Woodhead Publishing Limited, 2011, 208 pages Tailor welded blanks are sheets made from different strengths and thicknesses of steel pre-welded together before pressing and shaping into the final component. They produce high-quality components with the right grade and thickness of steel where they are most needed, providing significant savings in weight and processing costs in such industries as automotive engineering. Part 1 of this book review...

Klar E., Samal P.K. Powder Metallurgy Stainless Steels: Processing, Microstructures, and Properties

формат pdf
размер 7.48 МБ
добавлен 20 января 2012 г.

ASM International, 2007, ISBN: 0871708485, 243 pages Progress in the understanding of corrosion and corrosion resistance properties of sintered stainless steels has lead to new applications that benefit from net shape processing and more efficient material utilization. The text, extensive graphics, and tabular summaries provide a comprehensive reference to obtain good corrosion resistance properties of sintered stainless steels with careful pro...

Materials for Automobile Bodies

формат pdf
размер 14.63 МБ
добавлен 27 декабря 2010 г.

Butterworth-Heinemann An imprint of Elsevier Linacre House, Jordan Hill, Oxford OX2 8DP 200 Wheeler Road, Burlington MA 01803 First published 2003 Copyright © 2003, Elsevier Ltd. All rights reserved No part of this publication may be reproduced in any material form (including photocopying or storing in any medium by electronic means and whether or not transiently or incidentally to some other use of this publication) without the written permissio...

Sahai Y., Emi T. Tundish Technology For Clean Steel Production

формат pdf
размер 23.47 МБ
добавлен 30 декабря 2011 г.

World Scientific Publishing Company, 2008, 316 pages Continuous casting of steel has become a widely used process and an important step in steel production. The worldwide share of continuously cast steel has increased significantly in the last 25 years or so. However, concurrent with this increase in production levels are stringent quality requirements that have become crucial in the face of progressively increasing machine throughputs and lar...

Steel Manual

формат djvu
размер 35.4 МБ
добавлен 16 января 2012 г.

Изт-во: Verlag Stahleisen, 2007. - 185 pages. Язык: английский. This richly illustrated book contains a brief description of the modern technology of production of steel, as well as about its application in various industries. The main concern (for those who do not speak English) are the scheme of metallurgical processes and units, as well as photographs. Картинки и фотографии просто супер!

Verhoeven J.D. Steel Metallurgy for the Non-Metallurgist

формат pdf
размер 5.96 МБ
добавлен 06 января 2012 г.

ASM International, 2007, 212 pages This book explains the metallurgy of steel and its heat treatment for non-metallurgists. It starts from simple concepts_beginning at the level of high-school chemisty classes_and building to more complex concepts involved in heat treatment of most all types of steel as well as cast iron. This book is THE practicle primer on steel metallurgy for those who heat, forge, or machine steel. Consider this the Cliff...

Weng Y., Dong H., Gan Y. (Eds.) Advanced Steels: The Recent Scenario in Steel Science and Technology

формат pdf
размер 37.91 МБ
добавлен 30 декабря 2011 г.

Metallurgical Industry Press, Beijing and Springer-Verlag GmbH Berlin, 2011, 511 pages This book contains more than 50 articles selected from the proceedings of the International Conference on Advanced Steels (ICAS) held during 9-11, Nov, 2010 in Guilin, China. It covers almost all important aspects of steels from physical metallurgy, steel grades, processing and fabrication, simulation, to properties and applications. The book is intended for...

Yin R. Metallurgical Process Engineering

формат pdf
размер 13.09 МБ
добавлен 30 декабря 2011 г.

Metallurgical Industry Press, Beijing and Springer-Verlag Berlin, 2011, 328 pages "Metallurgical Process Engineering" discusses large-scale integrated theory on the level of manufacturing production processes, putting forward concepts for exploring non-equilibrium and irreversible complex system. It emphasizes the dynamic and orderly operation of the steel plant manufacturing process, the major elements of which are the flow, process network an...