This European Standard was approved by CEN on 28 February 2003.
24p. This part of this European Standard specifies the technical
delivery conditions for seamless cold drawn steel tubes of circular
cross section used in hydraulic and pneumatic power systems.
BS EN 10305-4: 2003 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems (Eng)
Стандарт
- формат pdf
- размер 227.49 КБ
- добавлен 08 января 2012 г.
Похожие разделы
Смотрите также
BS EN 10246-12: 2000 Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
Стандарт- формат pdf
- размер 141.19 КБ
- добавлен 05 декабря 2011 г.
14 cтр. The European Standard EN 10246-12:2000 has the status of a British Standard February 2000 This part of EN 10246 specifies the requirements and the acceptance levels for magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections. This part of EN 10246 is to be used for the detection of surface imperfections on the entire or any part of the outer surface of tubes, excluding the e...
BS EN 10246-14: 2000 Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections
Стандарт- формат pdf
- размер 159.02 КБ
- добавлен 05 декабря 2011 г.
16 стр. The European Standard EN 10246-14:1999 has the status of a British Standard November 1999 This Part of EN 10246 specifies requirements for automatic ultrasonic testing of seamless and welded steel tubes, with the exception of submerged arc welded (SAW) tubes, for the detection of laminar imperfections. The standard specifies acceptance levels and calibration procedures. NOTE : An alternative test method for the detection of laminar imperf...
BS EN 10246-1: 1996 Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
Стандарт- формат pdf
- размер 707.35 КБ
- добавлен 05 декабря 2011 г.
18 стр. The European Standard EN 10246-10:2000 has the status of a British Standard July 1996 This Part of EN 10246 specifies the requirements for automatic electromagnetic testing of seamless and welded ferromagnetic steel tubes, with the exception of submerged arc-welded (SAW) tubes, for verification of hydraulic leak-tightness. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter greater than or equal to 4 mm...
BS EN 10246-2: 2000 Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
Стандарт- формат pdf
- размер 425.88 КБ
- добавлен 06 декабря 2011 г.
16 cтр. The European Standard EN 10246-2:2000 has the status of a British Standard February 2000 This part of EN 10246 specifies requirements for automatic eddy current testing of seamless and welded austenitic and austenitic-ferritic steel tubes with the exception of submerged arc-welded (SAW) tubes for verification of hydraulic leak-tightness. The standard specifies acceptance levels, calibration procedures and gives guidance on the limitations...
BS EN 10246-3: 2000 Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
Стандарт- формат pdf
- размер 409.37 КБ
- добавлен 06 декабря 2011 г.
18 стр. The European Standard EN 10246-3:1999 has the status of a British Standard November 1999 This Part of EN 10246 specifies the requirements for automatic eddy current testing of seamless and welded tubes with the exception of submerged arc-welded (SAW) tubes for the detection of imperfections. The standard specifies acceptance levels, calibration procedures and gives guidance on the limitations of the tests. This Part of EN 10246 is applica...
BS EN 10246-5: 2000 Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal im
Стандарт- формат pdf
- размер 134.17 КБ
- добавлен 06 декабря 2011 г.
16 cтр. The European Standard EN 10246-5:1999 has the status of a British Standard November 1999 This Part of EN 10246 specifies the requirements for automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded ferromagnetic steel tubes, with the exception of submerged arc welded (SAW) tubes, for the detection of longitudinal imperfections. The standard specifies acceptance levels, calibration procedures and gives gui...
BS EN 10246-6: 2000 Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
Стандарт- формат pdf
- размер 122.96 КБ
- добавлен 06 декабря 2011 г.
16 стр. The European Standard EN 10246-6:1999 has the status of a British Standard November 1999 This Part of EN 10246 specifies the requirements for automatic ultrasonic shear wave testing of seamless steel tubes for the detection of transverse imperfections. The standard specifies acceptance levels and calibration procedures. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter equal to or greater than 10 mm....
BS EN 10305-1: 2002 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes (Eng)
Стандарт- формат pdf
- размер 280.75 КБ
- добавлен 08 января 2012 г.
This European Standard was approved by CEN on 2 October 2002. 32p. This Part of EN 10305 specifies the technical delivery conditions for seamless cold drawn steel tubes of circular cross section for precision applications.
BS EN 10305-2: 2002 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes (Eng)
Стандарт- формат pdf
- размер 221.12 КБ
- добавлен 08 января 2012 г.
This European Standard was approved by CEN on 2 October 2002. 24p. This Part of EN 10305 specifies the technical delivery conditions for welded cold drawn steel tubes of circular cross section for precision application.
BS EN 10305-3: 2002 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes (Eng)
Стандарт- формат pdf
- размер 233.93 КБ
- добавлен 08 января 2012 г.
This European Standard was approved by CEN on 2 October 2002. 26p. This Part of EN 10305 specifies the technical delivery conditions for welded cold sized steel tubes of circular cross section for precision applications