Dziuban J.A. Bonding in Microsystem Technology

  1. Файлы
  2. Академическая и специальная литература
  3. Приборостроение
  4. Микро- и наносистемная техника
Приборостроение
  • формат pdf
  • размер 20.81 МБ
  • добавлен 05 сентября 2011 г.
Dziuban J.A. Bonding in Microsystem Technology
Springer, 2006. -349 p. (Springer Series in Advanced Microelectronics, vol. 24).
This is the first compendium on silicon/glass microsystems made by deep wet etching and the first book with a detailed description of bonding techniques used in microsystem technology. Technological results presented in the book have been tested experimentally by the author and his team, and can be utilized in day-to-day laboratory practice. Special attention has been paid to the highest level of accessibility of the book by students.
Смотрите также

Chang C.Y., Sze S.M. ULSI Technology

  • формат djvu
  • размер 7.17 МБ
  • добавлен 17 декабря 2011 г.
The McGraw-Hill Companies, 1996, 726 Pages. This text follows the tradition of Sze's highly successful pioneering text on VLSI technology and is updated with the latest advances in the field of microelectronic chip fabrication. Since computer chips are foundations of modern electronics, these topics are essential for the next generation of USLI technologies, allowing more transistors to be packaged on a single chip. Contributing to each chapter...

Datta M., Osaka T., Schultze J.W. (Eds.) Microelectronic Packaging

  • формат pdf
  • размер 35.63 МБ
  • добавлен 17 декабря 2011 г.
CRC Press, 2005, 536 pages. Microelectronic Packaging analyzes the massive impact of electrochemical technologies on various levels of microelectronic packaging. Traditionally, interconnections within a chip were considered outside the realm of packaging technologies, but this book emphasizes the importance of chip wiring as a key aspect of microelectronic packaging, and focuses on electrochemical processing as an enabler of advanced chip metal...

Ghodssi R., Lin P., MEMS Materials and Processes Handbook

  • формат pdf
  • размер 26.97 МБ
  • добавлен 25 марта 2011 г.
Springer, 2011. 1185 p. ISBN: 0387473165 MEMS Materials and Processes Handbook is a comprehensive reference for researchers searching for new materials, properties of known materials, or specific processes available for MEMS fabrication. The content is separated into distinct sections on 'Materials' and 'Processes'. The extensive 'Material Selection Guide' and a 'Material Database' guides the reader through the selection of appropriate material...

Harman G. Wire Bonding in Microelectronics

  • формат pdf
  • размер 7.21 МБ
  • добавлен 06 января 2012 г.
3 Edition, McGraw-Hill, 2010, 426 pages. The definitive resource on the critical process of connecting semiconductors with their packages. Wire Bonding in Microelectronics, Third Edition, has been thoroughly revised to help you meet the challenges of today's small-scale and fine-pitch microelectronics. This authoritative guide covers every aspect of designing, manufacturing, and evaluating wire bonds engineered with cutting-edge techniques. In a...

K?hler M. Etching in Microsystem Technology

  • формат pdf
  • размер 15.89 МБ
  • добавлен 17 декабря 2011 г.
Wiley-VCH, Weinheim, 1999, 368 pages. Microcomponents and microdevices are increasingly finding application in everyday life. The specific functions of all modern microdevices depend strongly on the selection and combination of the materials used in their construction, i.e., the chemical and physical solid-state properties of these materials, and their treatment. The precise patterning of various materials, which is normally performed by lithog...

Microwave Journal 2010 №06

  • формат pdf
  • размер 26.1 МБ
  • добавлен 10 июля 2011 г.
Contents: Pat Hindle, Microwave Journal Editor. How GaAs foundries and Si and GaN technologies measure up in the battle for various commercial and military markets. Analog Devices. Introduction to a low power, short-range transceiver designed for operation in the global 2.4 GHz ISM band. Timothy Boles and Andrew Freeston, M/A-COM Technology Solutions. Introduction to modifications made to existing PHEMT process and device structure to improve swi...

Microwave Journal 2011 №02

  • формат pdf
  • размер 26.15 МБ
  • добавлен 10 июля 2011 г.
Contents: Ronen Holtzman, Elisra Electronic Systems Ltd. Emergence of microwave integrated circuit technology in multilayer radio frequency circuits as the chosen solution for small form and high functionality integrations. Phase Matrix Inc. Introduction to a series of microwave frequency synthesizers covering 0.1 to 10 GHz and 0.2 to 20 GHz. Chin-Leong Lim, Avago Technologies. Optimization of several design parameters to minimize internally gene...

Tan C.S., Gutmann R.J., Reif L.R. Wafer Level 3-D ICs Process Technology

  • формат pdf
  • размер 14.31 МБ
  • добавлен 08 ноября 2011 г.
Springer, 2008. - 422 p. (Series in Integrated Circuits and Systems). Wafer Level 3-D ICs Process Technology focuses on foundry-based process technology that enables the fabrication of 3-D ICs. The core of the book discusses alternative technology platforms for pre-packaging wafer level 3-D ICs, with an emphasis on wafer-to-wafer stacking. Driven by the need for improved performance, a number of companies, consortia and universities are researchi...

Wilson S.A. e.a. New materials for micro-scale sensors and actuators. An engineering review

  • формат pdf
  • размер 9.12 МБ
  • добавлен 11 марта 2011 г.
Materials Science and Engineering R 56 (2007) 1–129 (Elsevier B.V. ) This paper provides a detailed overview of developments in transducer materials technology relating to their current and future applications in micro-scale devices. Recent advances in piezoelectric, magnetostrictive and shape-memory alloy systems are discussed and emerging transducer materials such as magnetic nanoparticles, expandable micro-spheres and conductive polymers are i...

Zhou Y. Microjoining and Nanojoining

  • формат pdf
  • размер 37.05 МБ
  • добавлен 19 сентября 2011 г.
Woodhead Publishing Limited, 2008, 810 pages Many recent advances in technology have been associated with nanotechnology and the miniaturization of components, devices and systems. Microjoining has been closely associated with the evolution of microelectronic packaging, but actually covers a much broader area, and is essential for manufacturing many electronic, precision and medical products. Part 1 reviews the basics of microjoining, includin...
  • 2008 — 2024 «СтудМед»