Fritsching U. Spray Simulation: Modeling and Numerical Simulation of Sprayforming metals

Fritsching U. Spray Simulation: Modeling and Numerical Simulation of Sprayforming metals
  • разное
  • pdf
  • 8.72 МБ
  • добавлен 20.01.2012
Cambridge University Press, 2004, ISBN: 0521820987, 272 pages

Spray forming combines the metallurgical processes of metal casting and powder metallurgy to fabricate metal products with enhanced properties. This book provides an instruction to the various modelling and simulation techniques employed in spray forming, and shows how they are applied in process analysis and development.
The author begins by deriving and describing the main models. He then presents their application in the simulation of the key features of spray forming. Wherever possible he discusses theoretical results with reference to experimental data. Building on the features of metal spray forming, he also derives common characteristic modelling features that may be useful in the simulation of related spray processes.
The book is aimed at researchers and engineers working in process technology, chemical engineering and materials science.

Introduction
Spray forming of metals
Modelling within chemical and process technologies
Fluid disintegration
Spray
Compaction
An integral modelling approach
Summary and outlook

Смотрите также


Mei C., Zhou J., Peng X. Simulation and Optimization of Furnaces and Kilns for Nonferrous Metallurgical Engineering

Mei C., Zhou J., Peng X. Simulation and Optimization of Furnaces and Kilns for Nonferrous Metallurgical Engineering

  • разное
  • pdf
  • 3.91 МБ
  • добавлен 05.04.2011
Springer, 2010. 450 p. ISBN:3642002471

"Simulation and Optimization of Furnaces and Kilns for Nonferrous Metallurgical Engineering" is based on advanced theories and research methods for fluid flow, mass and heat transfer, and fuel combustion. It introduces a hologram simulation and optimization methods for fluid field...
Habashi F. (ed.) Handbook of Extractive Metallurgy Vol. 1-4

Habashi F. (ed.) Handbook of Extractive Metallurgy Vol. 1-4

  • разное
  • djvu
  • 42.77 МБ
  • добавлен 09.11.2010
Wiley-VCH, –1997. – 2426 p.
A wealth of data on metals and their extraction is revealed in this comprehensive handbook. The aim of this book is to provide a clear description of how a particular metal is extracted industrially from different raw materials, and on what its important compounds are.

The Handbook is the...
Habashi F. (ed.) Handbook of Extractive Metallurgy Vol. 1-4

Habashi F. (ed.) Handbook of Extractive Metallurgy Vol. 1-4

  • разное
  • pdf
  • 46.5 МБ
  • добавлен 09.11.2010
Wiley-VCH, –1997. – 2426 p.
A wealth of data on metals and their extraction is revealed in this comprehensive handbook. The aim of this book is to provide a clear description of how a particular metal is extracted industrially from different raw materials, and on what its important compounds are.

The Handbook is the...
Ferry M. Direct Stripcasting of Metals and Alloys: Processing, Microstructure and Properties

Ferry M. Direct Stripcasting of Metals and Alloys: Processing, Microstructure and Properties

  • разное
  • pdf
  • 68.06 МБ
  • добавлен 28.12.2011
Woodhead Publishing and Maney Publishing, 2006, 275 pages

Direct strip casting is a continuous casting process for producing metallic sheet directly from the molten state that minimises the need for substantial secondary processing. This important book is the first to review the implications of strip casting technolog...
Thompson M. (Ed.). Base Metals Handbook

Thompson M. (Ed.). Base Metals Handbook

  • разное
  • pdf
  • 2.59 МБ
  • добавлен 08.01.2012
Edited by Martin Thompson
Woodhead Publishing Limited, 2006. 464 pp.

The purposes of the Base Metals Handbook is to provide thorough yet compact descriptions of the metals. This includes their histories (which vary in length from a century or so to several millennia), where they are found and how they are extracted,...
Whang S.H. (Ed.) Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications

Whang S.H. (Ed.) Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications

  • разное
  • pdf
  • 27.87 МБ
  • добавлен 28.12.2011
Woodhead Publishing Limited, 2011, 803 pages

Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest tec...
Brandt D.A., Warner J.C. Metallurgy Fundamentals

Brandt D.A., Warner J.C. Metallurgy Fundamentals

  • разное
  • djvu
  • 6.69 МБ
  • добавлен 15.01.2012
Goodheart-Wilcox, 2005, ISBN 1590703456, 301 pages

Provides instruction and information on the basic principles of metallurgy. Emphasizes the practical aspects of metallurgy. Explores the behavior of metals subjected to metallurgical processes and explains why certain material properties are desired and how these proper...
Lenard J.G. (Ed.) Metal Forming Science and Practice

Lenard J.G. (Ed.) Metal Forming Science and Practice

  • разное
  • pdf
  • 17.76 МБ
  • добавлен 30.12.2011
Elsevier Science, 2002, Pages: 378

A State-of-the-Art Volume in Honour of Professor J.A. Schey's 80 th Birthday

The topics included in this book include: John Schey and value-added manufacturing; Surface finish and friction in cold-metal rolling; Direct observation of interface for tribology in metal forming; ...
Higgins R.A. Engineering Metallurgy: Applied Physical Metallurgy

Higgins R.A. Engineering Metallurgy: Applied Physical Metallurgy

  • разное
  • pdf
  • 28.23 МБ
  • добавлен 04.01.2012
6 Edition, Arnold, Hodder Headline Group, London, 1993, 582 pages

An ideal introduction to physical metallurgy, this popular and well-established text offers far more specific information on alloys and steels that comparable general materials books. Placing emphasis very much on applied metallurgy, the author employs a...
Weng Y., Dong H., Gan Y. (Eds.) Advanced Steels: The Recent Scenario in Steel Science and Technology

Weng Y., Dong H., Gan Y. (Eds.) Advanced Steels: The Recent Scenario in Steel Science and Technology

  • разное
  • pdf
  • 37.91 МБ
  • добавлен 30.12.2011
Metallurgical Industry Press, Beijing and Springer-Verlag GmbH Berlin, 2011, 511 pages

This book contains more than 50 articles selected from the proceedings of the International Conference on Advanced Steels (ICAS) held during 9-11, Nov, 2010 in Guilin, China. It covers almost all important aspects of steels from phys...