Baker R.C. Flow Measurement Handbook: Industrial Designs, Operating Principles, Performance, and Applications
Подождите немного. Документ загружается.
A SELECTION OF INTERNATIONAL STANDARDS 477
Turbine Meters
ISO 2715 Liquid
hydrocarbons
-
Volumetric measurement
by
turbine meter
systems.
ISO 9951
Measurement
of gas flow in
closed conduits
-
Turbine
meters.
ANSI/ASME MFC-4M-1986
Measurement
of gas flow by
turbine
meters.
AG
A Measurement
of fuel
gas
by
turbine
meters,
Transmission Measurement Committee
Report, No 7.
ANSI/ISA
RP31.1
Recommended
practice
specification,
installation
and
calibration
of tur-
bine flowmeters.
ANSI/API 2534
Measurement
of liquid
hydrocarbons
by
turbine meter
systems.
Vortex Meters
ISO/TR 12764:1997 Measurement of fluid flow
in closed conduits
-
Flowrate measurement
by means of
vortex shedding flowmeters inserted
in
circular cross-section conduits
running
full.
Electromagnetic Flowmeters
ISO 6817:1997
Measurement
of
conductive
liquid flow in
closed
conduits.
Method using
electromagnetic
flowmeters.
ISO 9104:1991
Measurement
of fluid flow in
closed conduits
-
Methods
of
evaluating
the
performance
of
electromagnetic flowmeters
for liquids.
Ultrasonic Flowmeters
ISO/TR 12765:1998
Methods
using
ultrasonic transit-time
flowmeters.
AGA Transmission Measurement Committee Report No 9, Measurement of
gas
by
multipath
ultrasonic
meters,
June 1998.
ASME MFC-5M-1985
Measurement
of
liquid
flow in
closed conduits
using transit-time
ultrasonic
flowmeters.
See also BS
4331 and VDE/VDI
Thermal Mass Flowmeters
ISO/CD-14511:1998 Measurement of fluid flow in closed conduits - Thermal mass
flowmeters.
Coriolis Flowmeters
ISO 10790:1998(E) Measurement of fluid flow in closed conduits - Coriolis mass
flowmeters.
Probes
ISO 3966 Method using pitot-static tubes.
ISO 7145
Determination
of flowrate of fluids in
closed conduits
of
circular cross-section
-
Method of
velocity measurement
at
one
point of the
cross-section
(BS 1042-2.2).
478 A SELECTION OF INTERNATIONAL STANDARDS
Modern Control Systems
ISO 7498-1:1995 Information technology open systems interconnection basic reference
model.
Some Other Industry-Specific Standards
Petroleum
API Manual of Petroleum Measurement Standards and other API documents.
Water
ISO 4064 Measurement of flow in closed conduits.
BS 5728 Flow of cold potable water in closed conduits.
ISO 7858 Measurement of water flow in closed conduits.
ANSI/AWWA (American Water Works Association) documents.
Gas
ANSI/CGA (Compressed Gas Association) documents.
ANSI/UL (Underwriters Laboratories) documents.
Road Vehicle Testing
ISO 7440 Road vehicles - Fuel injection equipment testing.
(Sources used to compile this list are: ISO and
BS
indexes, Institute of Measurement
and Control Yearbook 1998, Upp 1993).
Conferences
This list does not include some of the major professional institution conferences of
which flow measurement is a part, and that are run by ASCE, ASME, ISA, AGA, etc.
Nor does it include all the conferences that impinge on flow measurement but that
cover much wider areas and for which it is not necessarily central (e.g., Gas Research
Conferences).
Proceedings of a Symposium on Flow Measurement in Closed Conduits, National
Engineering Laboratory, Scotland, 1962.
Institute of Measurement & Control Symposium on the Measurement of Pulsating
Flow: 1970.
Proceedings of the International Conference on Modern Developments in Flow Mea-
surement, England: Harwell (Published 1972 by Peter Peregrinus Ltd.), 1971.
Fluid Dynamics Measurements (from Fluids Engineering Conference, Pittsburgh, PA,
and Winter Annual Meeting, Washington, DC), ASME Fluids Division, 1971.
Conference on Fluid Flow Measurement In The Mid 1970
;
s, Scotland: National
Engineering Laboratory, 1975.
FLO-CON 11 Proceedings of the Symposium - The Application of Flow Measuring
Techniques, Brighton, UK: 1977.
FLOMEKO 1978 - Flow Measurement of Fluids, North Holland, Amsterdam: 1978.
Proceedings Transducer 11 Conference Flow Measurement Session, Wembley,
London, 1977.
Measurement in Polyphase Flows, Winter Annual Meeting,
ASME
Fluids Engineering
Division, San Francisco, CA, 1978.
NEL Fluid Mechanics Silver Jubilee Conference, East Kilbride, Glasgow, Scotland:
1979.
Flow, Its Measurement and Control in Science and Industry, Flow 81 Conference,
St Louis, ISA, 1981. (Three volumes)
International Conference on Advances in Flow Measurement Techniques, Coventry,
England, 1981.
BHRA Conference on Physical Modelling of Multi Phase Flow, Coventry, 1983.
Conference on Flow Metering and Proving Techniques in the Offshore Oil Industry,
Aberdeen, 1983.
International Gas Research Conference, London, 1983.
479
480 CONFERENCES
International Conference on the Metering of Natural Gas and Liquefied Hydrocarbon
Gases, London, 1984.
64th Annual GPA Convention, Houston, Texas, 1985.
International Conference on the Metering of Petroleum and its Products, OYEZ,
London, 1985.
Conference on Fluid Control and Measurement, Tokyo, Japan, 1985.
Flow Measurement for Water Supply, London, 1985.
Second International Conference on Multi-phase Flow, London: BHRA, 1985.
International Conference on Flow Measurement in the Mid 80
;
s, 9-12 June.
Glasgow: NEL, 1986.
International Symposium on Fluid Flow Measurement, Washington, DC, 1986.
Trends in Instrumentation - Signal processing for flow measurement PC-based in-
strumentation systems, IOP Short Series No. 5 in collaboration with Trident Inter-
national Exhibitions Limited, 25th February 1987.
Second International Conference on Flow Measurement, BHRA, London, 1988.
FLUCOME '88, H
S
Stephens & Associates, Sheffield, September 1988.
North Sea Metering Workshop, National Engineering Laboratory, East Kilbride,
Scotland, 1988. (This series started in 1983 in Stavanger, Norway.)
FLOMEKO '89 - Fifth International Conference on Flow Measurement,
Dusseldorf,
Germany, 1989.
Multiphase Flow - Proceedings of the Fourth International Conference, BHRA,
Cranfield, 1989.
North Sea Flow Measurement Workshop, Haugesund, Norway, 1989.
Second International Symposium on Fluid Flow Measurement, Calgary, Alberta,
Canada, June, 1990.
International Conference on Flow Measurement of Commercially Important Fluids,
London, England, 1990.
North Sea Flow Measurement Workshop, National Engineering Laboratory, Scotland,
1990.
Advanced Techniques for Integrated Circuit Processing, International Society Optical
Engineers, Proceedings of SPIE,
1990/91.
FLUCOME
'91,
Proceedings of the 3rd Triennial International Symposium on Fluid
Control, ASME, Measurement and Visualization, San Francisco, Cal, USA, 1991.
North Sea Flow Measurement Workshop, Norwegian Society of Chartered Engineers,
1991.
International Conference on Flow Measurement in Industry and Science, London,
1991.
North Sea Flow Measurement Workshop, National Engineering Laboratory, Scotland,
1992.
Annual Symposium on Instrumentation for the Process Industries, Texas, 1992.
FLOMEKO
;
93 - Sixth International Conference on Flow Measurement, Korea, 1993.
North Sea Flow Measurement Workshop, Bergen, Norway, 1993.
CONFERENCES 481
Flow Measurement for the Utilities, Amsterdam, The Netherlands, 4-5 Nov. 1993.
Sponsored by /.
Flow
Meas.
Instrum.
FLOMEKO
;
94 - International Conference on Flow Measurement in the Mid 90's,
Glasgow, Scotland, June 1994.
FLUCOME '94, Toulouse, France, 1994.
North Sea Flow Measurement Workshop, Peebles, Scotland, 1994.
ISA Advances in Instrumentation and Control: International Conference and Exhi-
bition, 1995.
North Sea Flow Measurement Workshop, National Engineering Laboratory, Scotland,
1995.
Advances in Instrumentation and Control: International Conference and Exhibition
(ISA),
1996.
FLOMEKO '96 - Eighth International Conference on Flow Measurement, Beijing,
China, 1996.
North Sea Flow Measurement Workshop, Peebles, Scotland, 1996.
Symposium on Flow in Open Channels and Closed Conduits, Gaithersburg, MD,
1997.
North Sea Flow Measurement Workshop, Kristiansand, Norway, 1997.
FLOMEKO '98 - Ninth International Conference on Flow Measurement, Lund,
Sweden, 1998.
North Sea Flow Measurement Workshop, Gleneagles, Scotland, 1998.
References
Abe,
J., and Yoshinaga, A. (1991) Flowmeasurement by using fluidic resistor.
FLUCOME
'91 3rd
Triennial
Int.
Symp.
on Fluid
Control,
Measurement and
Visualization.
San Francisco: 559-564.
Abernathy,
F.
H.
;
and Kronauer, R. E. (1962) The formation of vortex streets. /.
Fluid
Mechanics,
13:1-20.
Adiletta, G., Cascetta, F.
;
della Valle, S.
;
Pagano, S., and Vigo, P. (1993) Twin rigid straight pipe
Coriolis mass flowmeter.
Measurement,
11:289-308.
Advisory Committee on Aeronautics (1916-17) Reports and Memoranda, No. 295:675.
AGA-8 (1992)
Compressibility
and
supercompressibility
for natural gas and other
hydrocarbon
gases, Transmission Measurement Committee Report No. 8, AGA Catalog No. XQ 1285,
Arlington, VA.
Agarwal,
A.
K., and Turgeon, M. (1984) New MicroMotion mass flowmeters. Energy
Progr.
4:221-
224.
Agricola, J. B. (1997) Gas well flowline measurement by ultrasonic flow meter. North
Sea Flow
Measurement
Workshop,
Kristiansand, Norway, Paper 16.
Ahmad, K., Baker, R. C, and Goulas, A. (1986) Computation and experimental results of wear
in a slurry pump impeller.
Proc.
I.
Mech.
E,
Pt. C, 200:439-445.
Al-Asmi, K., and Castro, I. P. (1992) Vortex shedding in oscillatory flow: Geometrical effects.
/. FlowMeas. Instrum., 3:187-202.
Al-Khazraji,
Y.
A., Al-Rabeh, R. H., Baker, R. C, and Hemp, J. (1978) Comparison of the effect
of a distorted profile on electromagnetic, ultrasonic and differential pressure flowmeters,
FLOMEKO
1978 -
Proc.
Conf.
on
Flow Measurement
of
Fluids.
Groningen, The Netherlands
(Amsterdam: North-Holland Publishing Co.): 215-22.
Al-Khazraji,
Y.
A., and Baker, R. C. (1979) Analysis of the performance of three large-electrode
electromagnetic flowmeters. /.
Phys.
D, 12:1423-34.
Al-Khazraji,
Y.
A., and Hemp,
J.
(1980)
Electromagnetic flowmeters
and
methods
of
measuring
flow.
U.S.
Patent 4,434,666, March 6, 1984 (filed April 4, 1980).
Allen, C. (1994) The Interoperable Systems Project (ISP).
Meas.
Control,
27(2):38-41.
Al-Rabeh, R. H. (1981) The
theory
and
performance
of
electromagnetic
flowmeters.
PhD Thesis,
Imperial College, University of London, England.
Al-Rabeh, R. H., and Baker, R. C. (1979) Optimisation of conventional electromagnetic flowme-
ters.
Fluid
Mechanics Silver Jubilee
Conference,
National Engineering Laboratory, Glasgow,
Scotland, Paper 6.1.
(1986) On the ability to dry calibrate an electromagnetic flowmeter. /.
Phys.
E:
Sci.
Instrum.,
19:203-206.
Al-Rabeh, R. H., and Hemp, J. (1981) A new method for measuring the flow rate of insulating
fluids. Int. Conf
on Advances
in
Flow Measurement
Techniques,
BHRA, Paper K3:267-278.
Al-Rabeh, R. H., Baker, R. C, and
Hemp,
J.
(1978) Induced flow measurement theory for poorly
conducting fluids.
Proc.
Roy.
Soc.
A, 361:93-107.
Aly, F. A., and Lee, L. L. (1981) Self consistent equations for calculating the ideal gas heat
capacity, enthalpy and entropy.
Fluid Phase
Equilibria,
6:169-179.
Amadi-Echendu, J. E., and Higham, E. H. (1990) Additional information from flowmeters via
signal analysis.
IEEE
Trans.
Instrum.
Meas.,
39(6):998-1003.
Amadi-Echendu, J. E., and Hurren,
P.
J. (1990) Identification of process plant signatures using
flow measurement signals.
IEEE
Trans.
Instrum.
Meas.,
39(2):416-20.
483
484 REFERENCES
Amadi-Echendu, J. E.
;
and Zhu, H. (1992) Signal analysis applied to vortex flowmeters.
IEEE
Trans.
lustrum.
Meas.,
41(6):1001-4.
Amadi-Echendu,
J.
E.
;
Zhu, H., and Higham,
E.
H. (1993) Analysis of signals from vortex flowme-
ters.
/.
Flow
Meas.
Instrum., 4:225-32.
Amini, A.
;
and Owen, I. (1995) The use of critical flow venturi nozzles with saturated wet steam.
/.
Flow
Meas.
Instrum., 6:41-7.
Anon. (1966a) Measuring beefeater gin.
Control,
10(96):292.
(1966b) Positive displacement flowmeter for low rates.
Control,
10(98):437.
(1988) NEL launches offshore multiphase flowmeter project.
Process
Eng.,
October: 33.
(1993) Non-intrusive multiphase flow meter.
Offshore Research
Focus,
No. 98:9.
(1994) Multiphase flow meter.
Offshore Research
Focus,
No. 103:2.
ANSI/API 2530:1985 Orifice metering of natural gas and other related hydrocarbon fuels.
Aoki, T., Nukui, K., Okamura, S., and Kimura, Y. (1996) Development of fluidic gas meter
(improvement of sensitivity at lower flow rate using U-shaped target sensor),
FLOMEKO'96
Proc.
8th Int.
Conf.
on
Flow
Measurement,
Beijing, China: 138-43.
API (1992) American standard method for measurement of liquid hydrocarbons by displace-
ment meter systems, Chapter 5.2, Manual of
Petroleum
Measurements.
Washington DC:
American Petroleum Institute.
Arasi, J. A. (1989) Coriolis mass flowmeter passes NGL line field trials. Oil &
Gas
/., January:
59-61.
Arnberg, B. T., Britton, C. L., and Seidl, W. F. (1973) Discharge coefficient correlations for
circular-arc venturi flowmeters at critical (sonic) flow.
ASME,
Paper No 73-WA/FM-8.
Arnold, R. M., and Pitts, R. W. (1981) Fluid flow
meters
for mixed liquid and
gas.
U.S. Patent
4,272,982, June 16.
Aschenbrenner,
A.
(1989) Calibration of the new test rig for large gas meters of the Physikalisch-
Technische Bundesonstalt.
FLOMEKO
5th Int. Conf on
Flow
Measurement:
11-22.
Asher, R. C. (1983) Ultrasonic transducers for chemical and process plant.
Phys.
Technol, 14:19-
23.
(1997) Ultrasonic Sensors: For Chemical and
Process
Plant. Bristol, UK: Institute of Physics.
ASME/ANSI MFC-7M (1987) Measurement of
gas
flow by means of critical flow venturi nozzles.
New York: ASME.
Aston, N.
A.
J.,
and Evans, G.
V.
(1975) The integrated pulse velocity method applied to the cali-
bration of flowmeters in high pressure natural gas systems.
Conf.
on Fluid Flow Measurement
in the Mid 1970's, Paper D-2, East Kilbride, Scotland: National Engineering Laboratory.
Athane, B. (1994) Implications of legal metrology in flow measurement for the utilities. /.
Flow
Meas.
Instrum., 5(2):67-9.
Atkinson,
K.
N. (1992)
A
software tool to calculate the over-registration error of
a
turbine meter
in pulsating flow. /.
Flow
Meas.
Instrum., 3:167-172.
Awberry, J. H., and Griffiths, E. (1926-7) Further experiments with the Ewing ball-and-tube
flowmeter. Proc. Roy. Soc, Edinburgh, 47:1.
Baird (1993) Innovations in magnetic flowmetering. Advances in
Instrumentation
and
Control:
Int.
Conf.
Exhib. (ISA), Chicago, 48:879-84.
Baker,
P.
D. (1983)
Positive displacement liquid
meters.
International School of Hydrocarbon Mea-
surement (ISHM), University of Oklahoma, April 12-14.
Baker, R. C. (1968) Solutions of the electromagnetic flowmeter equation for cylindrical geome-
tries.
Brit. J. Appl. Phys.
(J.
Phys. D), l(2):895-9.
(1969) Flow measurement with motion induced magnetic field at low magnetic Reynolds
number.
Magnetohydrodynamics,
3:69-73
(in Russian).
(1970a) Effects of non-uniform conductivity fluids in electromagnetic flowmeters. /.
Phys.
D,
3:637-9.
(1970b) Linearity of motion-induced-magnetic-field flowmeter.
Proc.
I.E.E.,
117:629-33.
(1973) Numerical analysis of the electromagnetic flowmeter.
Proc.
I.E.E.,
120:1039-43.
(1976) Some recent developments in ultrasonic and electromagnetic pipe flow measurement
at Imperial College. ACTAIMEKO
VII:
339-48.
(1977) Liquid metal electromagnetic flowmeters in fast reactor technology.
Prog.
Nucl.
Energy,
1:41-61.
(1982) Electromagnetic flowmeters, pp.
209-51.
Developments
in
Flow Measurement
-
1
(R. W.
W. Scott, Ed.), London: Applied Science Publishers Ltd.
REFERENCES 485
(1983) A review of recent developments in electromagnetic flowmeasurement.
Third
Beer-
Sheva Seminar
on MHD -
Flows
and
Turbulence,
Ben-Gurion University of the Negev, Beer-
Sheva, Israel, 23-27 March 1981. Also in
Prog.
Astro.
Aero.,
84:225-59.
(1985) Principles and Practice of electromagnetic flowmeasurement.
Technisches
Messen,
52(1):4-12 (in German).
(1988) Measuring multiphase flow.
Chem.
Engineer,
October: 39-45.
(1988/9) An
Introductory Guide
to
Flow
Measurement.
London:
Mechanical Engineering
Publica-
tions.
(1989) Multi-phase flow moves on.
Control
Instrum.,
February: 35, 37.
(1991a) Response of bulk flowmeters to multiphase flow.
Proc.
I.
Mech.
E.
Part
C:
J.
Mech.
Eng.
Sci.,
205:217-29.
(1991b) Turbine and related flowmeters: Part I - Industrial practice. /.
Flow
Meas.
Instrum.
2:147-62.
(1993) Turbine flowmeters: Part II - Theoretical and experimental published information. /.
Flow
Meas.
Instrum., 4:123-44.
(1996) An
Introductory Guide to Industrial
Flow.
London: Mechanical Engineering Publications.
(1998) Flowmeter, pp. 245-7. Instruments of
Science,
An
Historical Encyclopedia
(R. Bud and
D.
J. Warner, Eds.), New York and London: Garland Publishing Inc.
Baker, R. C, and Deacon,
J.
E.
(1983) Tests on turbine, vortex and electromagnetic flowmeters in
2-phase air-water upward flow.
Int.
Conf.
on Physical
Modelling ofMulti-Phase
Flow,
Coventry,
England, BHRA Fluid Engineering, Paper HI: 337-52.
Baker, R. C, and Hayes, E. R. (1985) Multiphase measurement problems and techniques for
crude oil production systems.
Petrol.
Rev.,
November: 18-22.
Baker, R. C, and Higham, E. H. (1992)
Flowmeters.
U.K. Patent 2 231 669 B, December 23.
Baker, R. C, and Morris, M. V. (1983) The suitability of flowmeters for optical techniques.
Proc.
Int.
Conf.
on
Optical Techniques
in
Process
Control.
The Hague, Netherlands (Cranfield,
England: BHRA) (post-deadline paper).
(1985) Positive-displacement meters for liquids.
Trans.
Inst. M.C., 7:209-20.
Baker, R. C, and Smith, D. J. M. (1990)
Flowmeter Specification
Guidelines,
Report No. 14.
Cranfield, England: FLOMIC.
Baker, R. C, and Tarabad, M. (1978) The performance of electromagnetic flowmeters with
magnetic slurries. /.
Phys.
D, 11:167.
Baker, R. C, and Thompson, E. J. (1975) A two beam ultrasonic phase-shift flowmeter.
Conf.
on
Fluid Flow Measurement
in the Mid 1970s, East Kilbride Glasgow, Scotland: National En-
gineering Laboratory.
(1978)
Measurement
of fluid flow, U.S. Patent 4,078,428, March 14.
Baker, R. C, Deacon, J. E., Lenn, C. P., and Smart, M. D. (1985) The effect on electromagnetic
flowmeters of a change in fluid.
Meas.
Control,
8:5-10.
Ball,
J. M. (1977) Viscosity effects on the turbine flowmeter.
Proc.
Symp.
on Flow Measurement
in
Open Channels
and
Closed
Conduits.
NBS, Gaithersburg, MD: 847-69.
Balls,
B.
W., and Brown,
K.
J.
(1959) The magnetic flowmeter.
Symp.
on Flow
Measurement:
Trans.
Soc.
Instrument
Technology,
June: 123-30.
Barnes, R. G. (1982) Positive displacement liquid meters. Adv. Instrum., 37(3):1197-204.
Proc.
ISA.
Int.
Conf.
Exhib.,
(Philadelphia, PA, USA, 18-21 October 1982), Research Triangle Park,
USA, Instrum Soc Am.
Barry, J. J., Sheikoleslami, M. Z., and Patel, B. R. (1992)
Numerical
simulation of
flow
through
orifice
meters,
Gas Research Institute, GRI-92/0060.1.
Batchelor, G. K. (1967) An
Introduction
to
Fluid
Dynamics.
Cambridge: Cambridge University
Press.
Bates,
C. J. (1981) Laser doppler anemometry measurements of the flow through an orifice
plate.
Flow
Its
Measurement
and
Control
in
Science
and
Industry,
2:59-68.
Bates,
I.
P.
(1991) Field use of K-lab flow conditioner.
Proc.
North Sea Flow Measurement Workshop
1991 (two volumes), Norwegian Society of Chartered Engineers, October 22-24, 1991 (9th
in the series).
Battye, J.
S.
(1993) The correlation flowmeter -
A
detailed investigation of an attempt to improve
its performance.
FLOMEKO
'93
Proc.
6th Int.
Conf.
on
Flow
Measurement,
Korea: 492-499.
Baucom, W. E. (1979) Evaluation of a coriolis mass flow meter for pulverized coal flows. Pre-
pared by The Energy Conservation Division, The University of Tennessee Space Institute,
486 REFERENCES
Tullahoma, Tennessee 37388, for the U.S. Dept. Energy (Contract No. DE-AC02 -
79ET10815, December).
Baumoel, J. (1994) Use of clamp-on transit-time ultrasonic flowmeters in Aircraft mass fuel
flow, hydraulic fluid leak detection, & ground support applications.
Instrumentation
in the
Aerospace
Industry:
Proc.
Int.
Symp.
ISA,
Research Triangle Park, NC: 243-60.
(1996) Pipeline management using networked clamp-on transit-time flowmeters.
Proc.
Int.
Pipeline
Conf.,
Calgary, Canada, New York: ASME, Vol. 2:1123-8.
Bean, H. S. (1971)
Fluid
Meters,
Their Theory
and
Application,
6th ed. New York: ASME.
Beck, M. S., and Plaskowski,
A.
(1987)
Cross Correlation Flowmeters
- Their
Design
and Application.
Bristol, UK: Adam Hilger.
Beeson, J. (1995) Ultrasonics meters improve NorAm's custody transfer.
Pipeline
& Gas J.,
222(7):21-4.
Beg, N., and Toral H. (1993) Off-site calibration of a two-phase pattern recognition flowmeter.
Int.
J.
Mult.
Flow,
19:999-1012.
Bellinga, H., and Delhez,
F.
J. (1993) Experience with a high-capacity piston prover as a primary
standard for high-pressure gas flow measurement. /.
Flow
Meas.
Instrum., 4:85-90.
Bellinga, H., and Stronk, H.
B.
(1974) The practical application of flow straighteners with turbine
flowmeters for gas.
IMEKO VII
Conf.,
London, Paper BFL/242:1-11.
Bellinga, H. Hoek, C.
P.,
Kooi,
A.,
Van Laak,
F.
A.
L, and Orbous,
P.
J. (1981) Using
a
piston prover
as a primary standard in high-pressure gas metering.
Flow,
Its
Measurement
and
Control
in
Science
and
Industry,
Flow
'81
Conference,
St Louis, ISA.
Benabdelkarim, M., and Galiana, C. (1991) Nonradioactive densitometer for continuous mon-
itoring of cement mixing process.
Proc.
First
Int.
Conf.
on Health, Safety and
Environment
in
Oil
And
Gas Exploration
and
Production,
Society of Petroleum Engineers of AIME, Texas:
539-45.
Benard, C. J. (1988)
Handbook
of
Fluid
Flowmetering.
Morden, England: The Trade & Technical
Press.
Bentley, J. P., and Benson, R. A. (1993) Design conditions for optimal dual bluff body vortex
flowmeters. /.
Flow
Meas.
Instrum., 4:205-14.
Bentley, J. P., and Nichols, A. R. (1990) The mapping of vortex fields around single and dual
bluff bodies. /.
Flow
Meas.
Instrum.,
1:278-86.
Bentley, J. P., Benson, R. A., and Shanks, A. J. (1996) The development of dual bluff body
flowmeters. /.
Flow
Meas.
Instrum., 7:85-90.
Bernier, R. N., and Brennen, C. E. (1983) Use of the electromagnetic flowmeter in a two-phase
flow. Int.
J.
Multiphase
Flow,
9:251-7.
Betts,
K. S. (1990) Mass flow sensors: Measuring up to new applications.
Mechanical
Eng.,
112:
72-5.
Bevir, M. K. (1970) The theory of induced voltage electromagnetic flowmeters. /.
Fluid
Mech.,
43:577.
(1972) The effect of conducting pipe connections and surrounding liquid on the sensitivity
of electromagnetic flowmeters. /.
Phys.
D, 5:717.
Bevir, M. K., O'Sullivan,
V.
T., and Wyatt,
D.
G. (1981) Computation of electromagnetic flowme-
ter characteristics from magnetic field data. /.
Phys.
D, 14:376.
Bignell, N. (1994) A secondary standard ultrasonic gas flowmeter.
FLOMEKO
'94
Flow
Measure-
ment in the
Mid-90s,
Glasgow, Scotland: NEL, Paper 7.2.
(1996a) Comparison techniques for small sonic nozzles. /.
Flow
Meas.
Instrum., 7:109-14.
(1996b) Positive displacement gas flow standard.
Proc.
8th Int.
Conf.
on
Flow
Measurement,
Beijing, China: 544-9.
Bignell, N., Collings, A. R, Taylor, K. J. H., Martin, B. J., Braathen, C. W., Peterson, M., and
Welsh, C. (1993a) An ultrasonic domestic gas meter.
FLOMEKO
'93
Proc.
6th Int.
Conf.
on
Flow
Measurement,
Korea: 403-9.
(1993b) Calibration of ultrasonic domestic gas meter.
FLOMEKO
'93
Proc.
6th Int.
Conf.
on
Flow
Measurement,
Korea: 410-5.
BIPM/IEC/IFCC/ISO/IUPAC/IUPAP/OIML (1993)
Guide
to the
Expression
of
Uncertainty
in Mea-
surement, 1st ed. Geneva, Switzerland: ISO.
Birch, J. R., and Lemon, D. D. (1995) Non-intrusive flow measurement techniques for hydro-
electric applications.
ASCE Waterpower
-
Proc.
Int.
Conf.
on
Hydropower,
3:2049-58.
Birker, B. (1989) Theory, design and performance of the straight tube mass flowmeter. Mass
Flow Measurement Direct
and
Indirect,
London: IBC Technical Services Ltd.